Bl4cK32

yer i usually put my motherboard in the dishwasher on a medium heat and it gets out all the crap...

ive got a rocket in mine, leave her alone...

If you really want a good local kit speak to kane, Sly14 off here. He does A1 fibreglass work (as well as repairs) Ive got his gtr front bar ready to fit to my car (which is a gtr modified to fit the gtst) which he does himself. Send him a pm to see if he can help u out.

There are no camshaft "sensors" Take your car elsewhere and RUN unless the mean the cas, which wouldnt have anything to do with the issue you are having...

Its not that hard to change the suspension on yer car really. All u need is the 1 socket size and a long lever off some sort. If a nut is frozen in place then the besst thing to use is a can of "Rost off" Basically a silicon creeping spray that works its way into the thread of seized on nuts. Ive used this shit on bolts that were stuck on good, and after soaking fer a few hours or overnight anyhting will come off. As for the rounded nut, use a set of vice grips to bite into it then just get another to replace it. Seriously not that hard a job (seeing as its only 3 nuts per shock) Then again i can go on about how easy it is to do stuff forever....

considering im getting around 10.5 Lt / 100km with a 3lt in mine id say its up the shit. U should be getting around the same.

2 or 3 remaps can be expensive if doing future mods...

This was answered before...u need to work out your future plans for mods on the car. SAfc is a piggy back and will only let u adjust so much. If u want more power later, u will have to sell it and buy a pfc then. Its not a substitute at all. Tirbo should be straight swap. Warm up the car as Tuffr32 said.

http://www.yellowpages.com.au/search/postL...e&stateId=5 If u have it off the car it will be easy to match it up, or drive the car in to get a rough sizing. Or u could ask the forum here for fuel hose size...

Any workshop will struggle to fit u in if u ring up now for the weekend. If u ring shaun @ boostworx now im sure he could take a quick look, or at least tell u what may be wrong. Knock sensors wont be causing the problem u are having.

not really..id go fer the v35 gtr but i still like the 34

Pirtek

yes my cars power has been known to make people shit their pants when going for a ride... *no cubes its not my driving either

Wait till u get the car then take the filter to autobarn or similar to match em up to get pricing. K&n are always good

What usage would u get out of em? (where would u be driving them the most?) I use RB74's on the front as i feel that anything more expensive for the street (where most of my driving is done) is pointless..They hardly dust at all I had my gtr calipers rebuilt with new seals, then had the rb74's put in with new anti-squeal shims + used the copper grease supplied (shims + copper grease come in a kit from nissan for sfa) Installed em all, then went for a bed in (as i had the rotors machined fresh as well. Basically went fer a few 80-40 rolling stops and had em smoking. U could smell it hard... By the time i got to my driveway i could lock the front brakes easy. They have never squealed ever. Iirc they are $150 for the front set from racebrakes, who can send em to your door COD as well EBC arnt the best either...Ds2500 would be the next best one up from the rb74's...but then your looking at ~$240 a set :S

u can shove the spot the "im gunna shit me pants" photo up yers madaz...

question - rb2532 is in your avatar. Is that a rb25de r32, that u have converted to use the r32 gtst 5 stud rotors and brakes? Maybe them spacers were used on a different car to fit them rims to it. Cant u just fit some skyline spacers?

If u have a look at the suspension forum, sk has mentioned (yes im bringing up sk as he is a sus engineer) that the jap shocks are twin tube which arent ideal compared to monotube.. see here - http://www.skylinesaustralia.com/forums/in...howtopic=114718 Chinese copy or not, Bilsteins (for example (im a fanboi)) will be better than anything that comes from Japan

Have u looked at any of the job offers from the uni email? Plenty of jobs offered to last year uni students ive heard.

Im no ones bitch except to my mrs. Obviously no point trying to have an opinion with a post whore, cos they always have 50 answers lined up to de rail anyone.

+1 I was referring to the way Chapelle used the term Ni*** because if u did watch the vid he was saying himself how if a white man says it, they get beaten the f**k up, because its not acceptable. Andz if u insist on Pming me to say why dont u take a look at what i said, it was simply drop the homeboy slang. I think pming someone to tell them u are ignoring them is the tough guy approach. Btw, a tool is useful, unlike yourself... Word to yo mamma.

andz why dont u reply here instead of PM'ing me... No ones starting shit at all...u obviously got upset because someone else laughed.

Not the ideal solution. Then he would be playing with setting up the shocks, and farking around later when his handling or traction isnt right. Sell em off as a set, then go buy something like Bilstein with matched springs.

No i didnt say racist, or racist jokes. Being observant that a black neighbourhood is full of gay people? Or that they all rob u for a BJ? Yes, very observant of him.... Prejudice can mean - Preconceived opinion or bias against, or in favour of, a person or thing, characterised by stereotypical views. It may be positive or negative FYTI i did watch all of the vids, and laughed at them. andz - lay off the homeboy shit, it makes u look 14

No...posting shit about prejudice views, be it black, gay etc people are always going to have mixed views on the subject. Just because u find it funny doesnt mean others will. Keep your videos relativley clean, and your opinions to yourself, or u will find someone may/will be using the report button on u. btw/ out of interest how many warings u got now paully?