miragev

whats 1.8 holes ??? i have about 8-9mm preload on my 2530 turbos on my 32gtr any less and it won't hold boost even on low psi i have just got a new set of uprated hks actuators so we'll see how much preload i need to put on these even with 8mm preload on the standard actuators that came with the 2530's they still open at 13psi without the boost controller switched on i can't believe how much force is behind the wastegates even at 3-4 psi of boost

hi i had the same problem as you with my power fc i got mine programmed by a company in the uk they one of the best skyline tuners in the uk they are called.. perfect touch they tune the.. jun lemon a very famous r33 gtr .. http://www.perfect-touch.co.uk telephone..00441992 443900 ask for rob give them a call you would have to send the power fc to them though in the uk like i did but it's better than blowing up your engine they will put you a safe map on so you will be okay

are you sure it's not the wear indicator spring tabs on the brake shoes that are catching on the disk because the pads are worn mine was doing it on the rear of my gtr it was driving me crazy they are meant to make an annoying noise to alert you ...i took me ages to find this out

hi i had the same problem with my 32gtr it was the electronic panel inside the control unit behind the buttons 2 circuit boards plug togeather and the joints had come unsoldered half and hour with a soldering iron sorted it out...be careful not to short any other terminals out .. i also had a problem with the magnetic coils on the a/c compressor it kept blowing fuses as it had shorted out and the ohms was low so i changed the coil and all okay