Gordie

want to buy some more? comes attached to a car tho. open to offers.

s14 are 15mm longer then s13 r31 are shorter then s13 r30 is longer then s13, not sure how much tho as mine have been modifed to adjust track/camber. i can measure some stock ones when i get around to the other shed. r33 use different ball joint to s13 but are 15mm longer too im pretty sure, can just press out ball joint to change tho. so im thinking either s14 or r30 lca, s13 knuckles/hubs/brake, can't use stock s13 struts because the spring od is too big for c210 strut tunnel so have to use coilovers. what tie rods are you planing on using or will stock ones work?

guard roller, nismo bar, and panasprots sold. how do i edit my first post??

yeah they were supra rims. been told they might be 240z carbys? day permits are dirt cheap if someone wanted to drive it back to the mainland. will put some inside picks up soon.

1978 Datsun Skyline C210 Dark redish sedan L24 6 cylinder 5 speed manual Twin SU carburettors (off 260z) Extractors Lowered suspension Bonnet pins 14' mags not the ones pictured. Has had head gasket replaced, and head machined. Needs carbys tuned to run smoothly, tune was altered when head came off. no rego, but wouldn't take much to pass. $2500 or swap

1978 Datsun Skyline C210 Dark redish sedan L24 6 cylinder 5 speed manual Twin SU carburettors (off 260z) Extractors Lowered suspension Bonnet pins 14' mags not the ones pictured. Has had head gasket replaced, and head machined. Needs carbys tuned to run smoothly, tune was altered when head came off. no rego, but wouldn't take much to pass. $2500 or swap

seat sold.

bee*r sold. seat sold pending pick up i think.

just took a new pic then, il upload it in a minute, but yeah on the front of the sil in that pic.

As new, was fitted to a mates r32 for one drift day but didnt end up using it as the car still had the cat in and he didnt want to stuff it.

nah, want $250 for it, i paid $380 and has only been used one.

The 9's are on the back, not a ture mesh style but still look sweet can get better pics if needed

Its time to clear out the shed again, all parts located in the hobart area, pick up only most prices ono can put pics up as needed Wheels (numer of rims) bare rims, unless tyre size is writen -17x9 Panasport G7, 114.3x5 pair only $600 (2) -16x8 sportsmax 002 114.3x4/100x4, Kumho 205/50/16 tyres $1200 (4) -17x8 +18 17x9 +35 mesh rims, 114.3x4/x5, 215/45r17 re050 tyres $1200 (4) -15x7 +10 Roh gambles, 4x114.3 $500 (4) -13x7 Rebals, 114.3x4 $600 (4) -13x7 Spitfire mk2, 114.3x4, Yoko 032r semislicks 185/60r13 $500 (4) -13x7 Spitfire mk2 114.3x4, pair only, 235/50r13 treaded tyres $300 (2) -13x7 Spirfire mk2 108x4, 6 of, $500 (6) -13x7 ssr mk 2? 110x4 one only $100 (1) -14x7 Cheviot 5 slot, one only 114.5x5 $50 (1) -13x8 Enkie, 108x5, pair only $300 (2) -17x7 Avanket rh evolution, 4x100/4x114.3 215/45r17 pair only $200 (2) -15x6 steel rims 114.4x4 $50 a pair (6) Nissan parts -s13 nismo/aero front bar, one crack (easy fix) no vents $500 -s13 rear mudflaps $40 -s13 stock taillights $80 -s13 front knuckles $100 -1600 front struts, coilovers sleeves welded on, no inserts $50 -240k sedan rear light panel $50 -s13 factory super woofer , unknown condition $150 -rb20 engines, 2 gtst, 2 gts4 all stipped $500 -s13 front calipers with pads $100 -bee*r rev limiter $250 -4-5 stud spacers, changes for 4x114.3 to 5x114.3 $250 a pair -Ca20 r31 extractors $80 -200b front headlights, good for customs quad headlights on ke70's $100 Other parts -wb panelvan front clip, complete with lights $500 -xe/d side skirts $100 -rx4 sedan rear taillights $100 -ce lancer front lip spoiler $100 -ce lancer rear bumper pods $50 -vr commodore gtrs style rear spoiler $100 -LH slr5000 style front spoiler $100 -253/308 chrome rocker covers new $100 -tinted ke70 taillights $50 -ae71 scuttle panel red $50 -audioline 2x200w amp $100 -guard roller broken thread $100 -old school racaro seat $150 -round nose mini front spoiler $150 -gemini panelvan panels $? Aslo thinking of selling some of my c210/c211 skylines if anyone is keen, pm for more info.

N/a 30/25 with tripple 45's

The center garnish is a different length to the chocolate block ones, and the ends are on are different angle.

the word SKYLINE, but with holes in it were the lugs for the datsun badge goes over the top.

Hopefully that means someone bought the shell of them! doubt it tho

Buy mine, im putting it up for sale again soon http://www.skylinesaustralia.com/forums/Fs...ne-t275554.html

That 240k with cherry lights is mint! Bet that black coupe would sound sweet!!!

Sure the oil in front housing isn't coming in from the breather system from the rocker cover? Not sure if FJ's are set up that way but its pretty common on sr/ca to see oil being drawn into the intake from the rocker covers.

Yep, for the rear s13 coilovers and r31 brakes would be the go. Not worth the effot to try and fit r33 brakes to 240k struts, So either use your hilux set up or change to s13 front coilover, hubs knuckle etc and use the r33 brakes on that. keeping in mind s13 set up will sit the car very low. I know of a 240k running a s13 front swaybar, and gtr swaybars are a upgrade in a s13, so i reakon the r33 one should bolt up fairly easly. (may need custom link bars)

wow... If you get this car DO NOT MODIFY ANYTHING on it. And dont let it out of austraila.. As for value, 5-6000 would be about right, possibly more to the right person.

Did the bonnet have some of the reo underneath it cut out to clear the manifold? Mine has, but you can get front facing inlet manifolds of ebay pretty cheap so you dont have to cut it.

Did the bonnet have some of the reo underneath it cut out to clear the manifold? Mine has, but you can get front facing inlet manifolds of ebay pretty cheap so you dont have to cut it.