jona

basic loom and sensors. not sure what version, as i haven't used it.

basic loom and sensors. not sure what version, as i haven't used it.

i have the following for sale -Autronic SM4.One of the best ecu's money can buy. Launch control, traction control, antilag, flat shift are a few of the features. $1600 -Garrett GT3566R (xr6 turbo), basically a GT3540 that has been high flowed with T04z compressor wheel and housing modified to suit. Completely rebuilt by grant from per4manz. Still in packaging and unused. Will flow 700+hp. (have receipts for $1200 for rebuild and modfications) $1600 Uploaded with ImageShack.us contact matt on 0415782112

1500 for both now. Practicaly a brand new turbo guys!

sorry to hear about the car. Will you be wrecking it

hey guys i have for sale my Turbonetics T72 turbo and 48mm wastegate. The turbo has been rebuilt by grant at per4manz turbos here in perth and was rebuilt with a 360 degree thrust bearing. I have 1200 dollars worth of reciepts for this. Has not been taken out of the packaging since the rebuild. This turbo has a 72mm inducer, which places it in terms of size in between a HKS t51 kai and spl. Will make 600+rwhp with current housings. Previously made 460rwhp @ 17psi on an RB30. Compressor is good for 32psi. I am chasing 1500 for the turbo and 200 for the 48mm turbonetics deltagate (comes with screamer too) matt

hey guys, FOR SALE R33 gtst gearbox 1200 ono Turbonetics T72 turbo. (bigger then T51 KAI, smaller then SPL). Recently rebuilt with 360 degree thrust bearing. Will flow 800hp with current housing.Has not been mounted or taken out of packaging since rebuild. Turbonetics 48mm deltagate external astegate. comes with screamer. $1800 matt

externally, how can i tell the difference. i bought one out of a wreck and i'm not sure if i have been played for a fool! cheers

i have pmd you about the cooler a few days ago but no reply?

forgot to mention it comes with inlet manifold too

Am heading in another direction with my RB25/30 build up. This head is the one you want for an 25 conversion as it bolts straight up to the rb30 with no modification to oil galleries. i am in WA SOR and can be contacted on 0415782112 Im after 450 no offers i can supply brand new adjustable cam gears for another 140. cheers matt

hey, ok i bought this cooler the other day and it seems i should have done some homework! Ive read about stories of turbos from these guys being glued together!! Anyway has anyone had any experience with these intercoolers? As long as the welds are good, which they look to be, i cant see it being too much of a problem as there is not alot of heat in the intake like there is with their exhaust manifolds that fall apart! is there anywhere in wa were you can get these pressure tested??

Doesnt rb20 run a hydraulic lifter setup and the gtr a solid? Reason i ask is that i have an r32 rb25DE head i am putting on my rb30 and am looking for better cams, and i believe that the r32 rb20 and rb25 cams are similar?? if so this could be a cheap upgrade for me cheers

Thanks very much for your help mate

hello, i cant seem to find any infomation on RB30 rods other then they have a length of 152.5mm/6.0039" Now my question is, has anybody used vg30 rods in an rb30? they have similar length (6.071") which would bump up the rod/stroke ratio from 1.79 to 1.81. Obviously pistons would have to be ordered to suit the longer rod length The reason for this is the availability, cheapness and obviously the quality from using american rods. Here is the info for a VG30 rod, im wondering if anyone can help me out with the same specs for an RB30 rod Length-6.071" Rod Journal-1.967" B.E width-.817"