MAD R32 GTR !

I'm pretty sure i'm running over 600HP at the engine Once my tune is complete i'll probably be running 25PSI + of boost so i'll need the 2 pumps I might try mounting the pumps in tank Thanks heaps for your advice, i need everything i can get

the boost solinoid sounds like a good idea, i might have to look into that thanks adriano

Hey guys! I've finally got my car on the road after 2 years and i've got an issue with my new fuel system Im running a twin bosch 044 external setup in the boot with 2.5L serge tank I find especially in the warm weather that the fuel pumps get noisy as if there is not fuel. The serge tank also gets very hot Is there a better way of setting up the fuel system I'm running a t04z single turbo and currently got 400kw at all 4 wheels on a run-in tune @ 18PSI of boost I'm concerned my fuel is getting too hot and airating Any help would be much appreciated I've added some pics to help

CHIP-TORQUE ECU TO SUIT R32 GTR (RB26DETT) Selling due to upgrade (Need anti-lag) Originally purchased and tuned at SAS Automotive in Sydney NSW for $1350.00 This computer is fully reprogrammable using the factory sensors, factory harness/loom and air flow meters Also supports Z32 AFM and bigger injectors Supported my GTR up to 330KW at all 4 wheels safely PLUG AND PLAY ! Currently tuned for Z32 AFM's 800cc Sard injectors 18PSI of boost

mate after the main engine ecu harness for the r32 gtr (rb26dett) If in good nick im interested

I have a r34 GTR fuel rail with an adjustable nismo fuel reg You can have rail and reg complete for $100 The reg itself is 2 months old

I'll take them if you inc freight to Sydney I wish you where in sydney! Damm!

how about 7k with no rego From Sydney i can come down and pick it up Does it run at all?

got one mate $160 with new horn button

its very easy ! Check out the vacuum hose on the brake booster There should be a date printed on the rubber hose

stick with genuine ! Can't go wrong

mate i have a fibre glass one which needs a little repair Comes with mesh and plastic bottom lip $200 take it today

mate just drop the bottom ball joint and there is just enough room for you to remove the drive shaft complete. Get a seal remover tool or lever bar to remove the old seal. Try not to damage any of the alloy housing. Knock the new seal in with a large socket evenly. Bit of rubber grease on the drive shaft or inner lip of the seal doesn't harm. Lube is goood ! Enjoy

got a r32 GTR fibreglass bar for ya ! needs a little work $220 in primer Comes with bottom lip and mesh [email protected]

Hey! If anyone has got some spare FRONT r32 gtr calipers (4 pot) around i need the hard hose's that run behind that then connect up to the flexi rubber hose Hope someone can help, i'll pick up anywhere in sydney. Kinda urgent Thanks!

bump me up !

Hey guys ! Got a few more spots for tomorrows track day at wakefield park Follow the link below if you want in Private day $200 all you can drive ! http://www.afterdarkgarage.com/index.php

mate i got a aftermarket fibreglass r32 GTR bar. Problem , im in Sydney $220 its yours Needs a little work, in primer Call me if you want a pic

got a r32 gtr pump if its any help $160

Price drop $1100 for the rims ! Bloody bargain of the century

hard to tell from that angle any other pics?

http://www.skylinesaustralia.com/forums/Ge...ze-t224981.html Check em out !

Price drop $1199

pm sent

Brookvale is in Sydney, NSW Northern Beaches