blingcommander

Bump! Now comes with haltech ps1000 and patch loom to suit!

Thanks mate, being over 6 foot it is a pain to fit into these cars with a fixed back seat and not knee the wheel every time i try and use the clutch. Was originally rb25det and auto. Also forgot that the rear knuckles have spherical bushes for the toe and traction arms, and urethane bush on the camber arm. As well as the old trans cooler is now a powersteering cooler

Hey guys, selling my R33 sedan to fund other projects. specs are as follows: R33 Sedan, sexy 2 tone. little rough but in pretty good condition. there is a dint in the drivers rear quarter panel from tyre de-laminating, and a bit of damage to the rear of the bonnet from catching on the guard when opening it.. ENGINE: SR20DET from a s1 s14. new rocker cover gasket, and front and rear main seals, exhaust gaskets, turbo studs and lock tabs. EGR deleted GKTech rocker stopper kit braided turbo lines Midnightmods oil cooler kit (tomei style block, remote mount filter, medium sized cooler & braided lines) Midnight mods extended sump ASI radiator with BA thermofans and temp switch mid mounted intercooler with stainless piping stainless intake pipe with pod filter Midnight mods bellmouth dump pipe, full tucked 3 inch exhaust, centre offset rear muffler with twin stainless tips walbro 460 fuel pump DRIVELINE: S14 5 speed gearbox with GKTech shifter bushing and new shifter seal exedy heavy duty button clutch GKTech braided clutch line 1 piece tailshaft with new staked unis 4.3 shimmed LSD SUSPENSION & BRAKES: BC coilovers custom JDI knuckles (my design to suit my driving and ride height) GKTech caster arms boxed and braced caster arm mounts GKTech traction arms GKTech rear camber arms GKTech rear toe arms S15 rear cradle (braced toe arms mounts and LCA mounts) Midnight mods solid cradle risers R33 GTR rear swayer with new link bushes Standard R33 turbo brakes all round with near new bend pads INTERIOR: Velo gtp90 drivers seat on custom rail velo passenger seat on custom rail (bit rough but does the job) nardi deep corn 360mm wheel with 3 inch spacer basic half cage (can still use the rear seat) fire extinguisher full set of genuine floor mats dash all works with the SR20, though the boost isn't hooked up, and the speedo is wrong (comes with a jaycar speedo corrector) WHEELS & TYRES: enkei RPF1 all round, painted to match the lower dark grey FRONT: 17x9 +22 plus a 15mm GKTech spacer running 215/45 kumho ku31 tyres REAR: 18x9.5 +38 running 235/40 worn tyres there is probably stuff i have forgot, but here is a link to the build thread: http://www.nissansilvia.com/forums/index.php?showtopic=536352 most of the parts that went into this build have only done 1 track day and very little street driving. there is really nothing to spend, just jump in and drive. it also comes with the stock exhaust, stock steering wheel, stock struts with king springs, and a snapped in half type m front bumper. it is also defected, so will need a roady, come with no rego also. I'm after 10k and the car is located in country victoria, 2 hours east of melbourne. my number is 0438319875, thanks for reading PICS AND VID

Hey guys, selling my t88 34d turbo. Brand new, exhaust flange hasn't even been welded on yet, so can run the 4 bolt flange supplied or get a v band one from trust. 15cm exhaust housing. Chasing $2000 inc delivery. Located in country victoria, 2 hours east of melbourne.

Hey guys, selling my t88 34d turbo. Brand new, exhaust flange hasn't even been welded on yet, so can run the 4 bolt flange supplied or get a v band one from trust. 15cm exhaust housing. Chasing $2000 inc delivery. Located in country victoria, 2 hours east of melbourne.

bahaha, no idea how that happened

cool as, is it a nardi pattern?

exactly as the topic states, located in country vic, east of melb

back to the top

as the topic states, i'm chasing a standard r33 gtr rear swaybar and D bushes and also an s14/s15 bare rear subframe (prefer diff bushes to be intact) i'm in drouin, vic thanks

pms sent, now chasing R33 GTR rear swaybar and D bushes, instead of aftermarket swaybars. sorry, can't change the title

how much were you chasing for the parts and postage to vic, 3858. thanks

hey guys, i'm chasing some thicker aftermarket swaybars to suit a r33 gtst. also for a r33 gtst i'm after a manual pedal set, mastercylinder, hardline, centre console, and shifter cover thingy. thanks

i have 6 17x10 +20 regamasters, and they have no hope of fitting my new car (unless i get the diff shortened, damn live axle) so i'm hoping to do straight swaps for your 17x10 +40 regamasters. all you need to do is pay postage. or if you are in melb, i will drive up and swap in person. i have 4 in standard silver. 1 has been repaired on the inner lip. and 2 in a dark metallic charcoal. i'm located in heyfield, about 2 hours east of melb

IIRC mookas engine is 9:1 comp and with the cams it is pushing a decent amount of air out of it. my money is on the exhaust housing being too small, engine is sweet red line on this graph is EXACTLY the same engine running the old 35/40, mooka dyno sheet comparison.pdf