Fujiwara

is this cheap to replace/fix? Or is it better off me spending more $$$ on the car

Guys. and ladies~ Got my car dynoed last week at CRD just to see if it was knock/ping running rich etc etc The car has the mods on my sig...Can't b arsed typing again. When they first put it on it was running 115kw@tw I thought i had bought a lemon, but they said that the boost controller settings were f**ked. They had a play and now it's running 200kw@tw but running 12psi or pounds or whatevr of boost. Is this a low figure? Because i thought stock standard my car pulls about 150kw@tw...

Reco is different to being serviced?

Hey guys. I've tried a search on the forums but no posts quite answer the question. What exactly is this? As i am looking for a new clutch (maybe exedy series or ORC 709D) For the ORC it states that "In order to make this clutch Push to Pull a geniune Clutch Kit is needed" What is pust to pull or pull to push? And what are out clutches setup as from factory?

did u guys purchase this from greenline? because when i go on the site, it doesn't say anything about it being a kit or including a flywheel. How long did it take for this to land? And what other parts "Nissan" parts did u need? And what other parts "Nissan" parts did u need? i ask because

meh... might just wait till i get the PFC and then tune it so it doesn't stall...

is it normal for coilovers to make clunking sounds from the rear? like a shitbox with long gone suspension? Cause mine clunks and rattles alot

it's lightly modded. Why would it stall if i have an atmo bov?

so whats the difference? in kw/torque/weight?

I got jipped then. Didn't know series 2 had more torque etc... DAMN!!!! they all looked the same to me though...the interior. I sat in a late model 99...purchased a 98 model. No difference i can tell from the interior though. Any pics on the site? And how much you looking for the cover?

ahhh.. i thought this as well. Activating at above 80km/h But i thought it was to help with the handling...not to induce understeer -.-;;;;

How about just for parts? I will prolly get a HD clutch or something. Labor should be free as it is under warranty. They will change it...but i might pay extra to get a decent kit fitted the noise appears when i start the car. In neutral no sound. When i step on the clutch i hear the noises... And sometimes i can hear it whilst driving... update* car now stalls when i start driving off (when i start my engine) unless i give it gas straight away. And it keeps making shrieking? bell like noises every time i engage the clutch. I'm thinking mayb clutch bearings and flywheel? Cause there is a grinding noise as well.

What about the front of the car? They don't have these knobs... And i will check about the numbering on the rears. 0 = soft and 10 = hard i take it?

Ahh...didn't know that... What's a S2 cover? Series 2? Does it look any different?

went to CRD and NRG today./ CRD did an awesome job...fixed up the boost controller so it feels like a turbo car now. Anyway, they said that it could be a clutch bearing...and while they look at it i may as wlel get a new clutch... FACK NRG said it was the release bearing in the clutch and that the flywheel sounds like it is just steel grinding. How much is it for a flywheel and a clutch kit? (pressure plate etc etc)

Hey guys. Thinking of getting BOV just so i can hear the stupid atmo noise. Few questions. WHat are the main differences between the Blitz DD, Greddy Type R and the Greddy Type RS? As far as i can tell they're all atmo, DD can hold upto 1.2bar, type r = 100-400hp and type rs = 280-450hp WHAT THE HELL HP is my skyling and are these figures from the flywheel or the wheels? And what do these soundlike? Can't find any sound clips... Which one do you guys recommend? And why are these so darn expensive? Thankls

So which Boost controllers have 3 solenoids? Or can i just buy a boost controller and buy the solenoid seperately? And i already have a am radiator, GReddy FMIC...so i guess i may need a new BOV if i up the boost... And is your cover in good nick? How much you chasing for the bolts and cover?

Correct me if i'm wrong, but isnt HICAS there to improve handling?

Car has weird noises coming from the clutch. I think it's the clutch because it starts making these noises. Can anyone tell me if this is normal? I have a brass button clutch in the car (apparently...dealer said so -.-; WHen i turn on the ignition, you can hear a high pitched noise. (When the gear is not engaged) When i had this car inspected, the inspector also said that this is normal for a car with an aftermarket clutch. Fair enough, seemed ok because when i depress the clutch u can hear it more, but once the gear is engaged, you can't hear anything. 2 days ago, while i was driving, i could hear the whining/ or high pitched metallic noise. It was like that for awhile....and then went away. It's on and off. Is it just the characteristics of the clutch? Or should i go and get it checked out? How long does it take to get the clutch checked out? Any other problems it could be if it is a problem? CHeers

I have HKS coilovers in my car, but don't know the model, whether it is dampening adjustable, camber adj, whether it has poillow tops. Where can i go to check which of these it does have, and what brand these are? Also, can you "service" coilovers rather than sourcing new ones? How much does this cost? And it has these turning knobs above the rear parcel shelf. What the hell are these??? I only had springs in my old car...so new to coilovers. Thanks!

Do TEIN sell these for the R34 GTT as well? I thought it was just for the GTR's which have a lighter bonnet

Just wondering if the Apexi PFC for the R34 GTT is still available... Tried searching on the forums and found out it's been discontinued...DAMN! Also, are these a full replacement ecu or a piggyback? Can this control boost or will i need a boost controller like the AVCR to controll it? And what is the point of a hand controller? I'm not a tech head when it comes to cars so i don't know what i would be doing with the controller. I'm tossing between the AVCR or the Blitz SBC id III Any issues with these controllers? Hoping i can make it a 3 port solenoid thingy... <-- if that makes sense Also, my car doesn't have the RB25DET Neo Rocker cover for the engine. How much will it cost for me to find and install one? With my old car (WRX) we had issues with the AFM when we had an oil based pod filter installed on our cars. It killed the AFM. Any such issues with the R34? And i can't seem to find any info on which POD gives the best results or the like. Maybe my search isn't that great. And are there any Cold Air intake options for the car or is there no point? Some people seem to still be running their stock airbox/filter. Please advise - i know that there are going to be differing opinions. But i am a noob and i would like to know. And how good is the stock BOV? how much boost can it handle? AND LASTLY, is Earls a recognised brand? Whats the country of manufacture? I think i've heard of it but not so sure. Because i have an earls oil cooler but i dunno if it is a relocation kit as well. Trying to find info...It's also painted blue. Thanks guys, Hope to meet up soon

So how much is it for a set of D2R globes???

What exactly do these bars do?

Woot! They still retain the Xenons from Jap. So the xenons are H1. What about the driving lights and the high beams? Can anyone shed some light on these? Thanks.