sherman89

In my old r32 4 door i went 11.76@124 with 440rwhp. Was on shitty street tyres but still went 1.74 to the 60. New car went 139mph with 540rwhp (auto)

Im selling my 7175, buy its gtscott cheap as! http://www.skylinesaustralia.com/forums/topic/414238-precision-7175-cea-ball-bearing/

Precision 7175, billet wheeled, ball bearing, .96 t4 flanged rear. Has done powercruise and 15 passes at the drags, has made 545rwhp @27psi on e85 through a powerglide, gone 9.91@139 on a rb30. Purchased from the boostlab in america. http://www.theboostl...Bearing%29.html Selling due to going a bigger precision! Located in brisbane, will ship anywhere. 0423 198 820 $1800 Thanks

I had a 35r on a 6boost mani, I changed to a new 6boost mani and 7175, and it is more responsive In every way, makes more power earlier, power doesnt drop off, and builds boost on the tbrake significantly faster....

I have a billet 7175 (.94 single entry) on a single cam rb30. With a powerglide. It's as responsive if not slightly better than a 35r (1.0x). Makes 549hp@28psi on e85. Trapped 138mph. Keen to feed it proper boost soon and see how it goes

Yeah thats how mine was done.

Need some please 0423 198 820. Thank you

That video is from years ago. Went te 9 in November last year. Was using stock box until a month ago, now has a dog box.

18omu did 9.54@156 stock box.

Bump $2100

2100!!

Bump

Motec m48 with motec cdi and motec ignition expander. Includes loom to suit rb30, ready to install. Brisbane, will post if needed. Had a change of plans and will just use the ecu i already have. $2200 0423 198 820 Thanks

Motec m48 with motec cdi and motec ignition expander. Includes loom to suit rb30, ready to install. Brisbane, will post if needed. Had a change of plans and will just use the ecu i already have. $2200 0423 198 820 Thanks

I wired my car from scratch, wasn't overly hard, power windows where abit of a prick but I just used a 3 way momentary switch with 6 terminals on the bottom. You need to switch the ground/positive to go up/down. Remember when wiring the alternator that you need a check light. Pm if you got an questions.

Some of the posts in here are so far from what powercruise actually is.

Basic engine rebuild, arp head studs, commetic 1.2mm HG. Abit of porting to the head. Spot-on inlet manifold (stock throttle body ) 6boost exhaust mani pro boost gate garret 3076 lt12 550cc inj. pump/tol 70/30 456rwhp @ 22psi.

Thanks. I'm neg on price and will happily sell without wheels/seat/ can even pull the driveline out and sell as a roller?

Make: Nissan Model: Skyline Year: 1991 Engine: rb25 Mileage Gearbox: rb25 Engine: rb25 - rebuilt engine, arp head studs, commetic 1.2mm head gasket, balanced/decked/honed/cleaned, ported head, new timing belt, water pump, spot on performance inlet manifold, standard throttle body. 6 boost exhaust mani, pro boost gate, garret 3076r, 3inch turbo back exhaust, all oil/water lines speedflow/braid, oil cooler braided line/speedflow, catch can with -10 speedflow /braided lines, alloy cooler piping. Holley black lift pump, 044 feeding rail, surge tank, jaz fuel cell, all speedflow/braided lines, sard fpr, nismo 550cc inj. microtech lt12 with hand controller. 391rwhp@17psi on pump fuel, 426@18psi on pump/tol 75/25. Suspension: Tein front adj coilovers, nismo read (10/8kg) cusco castor rods, nismo fixed front camber arms, 33 lca, fab 81 mod knuckles, silkroad traction arms, silkroad toe arm brace, kazama camber/toe arms. Interior: s14 dash, touch pad switch panel, full re-wire of entire car, nardi, autometer gauges, pivot tacho, greddy profec b 2, bride zeta 3's x1 (standard r32 passanger), full 2pac white inside/boot/engine bay. Stereo: Exterior: Gtr front gaurds, gtr bumper, fibreglass gtr style bonnet, vertex skirts, rear pods, mad blue colour Driveline: rb25 gearbox, nismo twin plate, gtr rear end 32 gtr brakes Wheels & Tyres: f 17x9 +17 cr kais with 30mm boltons, rear 18x9.5 +21 cr kais freshly powdercoated white, federal rpm front, china rear Extra Details: Dont really know if i want to sell it, just putting it up to see if theres interest really. Rear gaurds have been fixed up since this pic, they are now smooth as Item Condition: excellant Location: Brisbane Reason For Sale: Thinking i might build a vl Contact Details: 0423 198 820 Price and Payment Conditions: $18 000 can remove parts.

Hi, Im currently re-doing the wiring on my car. I have no standard wiring/plugs at all. Im up to doing my alternator, from my understanding i need: 1. big cable that runs to battery (distribution block) 2. Cable to signal the alternator to 'run' (off the same switch as ecu power) Now i hear i need a check light aswell, what exactly do i use as the check light and where di i wire it?? Im using the stock alternator with the big 2 pin plug then the big terminal for the + output. Anything else i need alternator wise? Thanks

Item Summary: Real deal rb25 setup - 6boost, nismo, 3076, Location: QLD: Brisbane Postcode: Asking Price: $8,000 Condition: Used Reason for Selling: Possibly changing setuep Delivery Methods: PickUp Contact Info: 0423 198 820 Extra Information: Considering selling my entire engine/gearbox setup to make way for a v8. Im not overly fussed if it doesnt sell as if i dont get interest im happy to keep it! rb25 engine - arp head studs, commetic head gasket, king bearings, all crack tested/balanced, machined bores, decked block.Heavily ported head, Done less than 1500kms, everything repplaced water pump, timing belt, idler pulleys etc etc, done powerplay this year with current turbo setup. $1600 Powdercoated bright pink cam covers, included cam belt covers also bright pink, with -10 speedflow weld ons $200 Rb25 gearbox - recently rebuilt, feels VERY good! Comes with stock throwout bearing carring and clutch fork. Inclding 1 peice tail shaft and modified xmem to suit r32 $1700 Nismo twin plate clutch and flywheel, Done powerplay in jan, thats it! Brought off jpp freshly rebuilt in january, includes throwout bearing carrier and bearing $800 SOLD PENDING Spot on performance forward facing intake manifold, uses stock throttle body, excellant bit of gear, done very little work and looks great! $550 6boost exhaust manifold, t3 flange, pipe for wastegate - done powerplay this year, excellant exhaust manifold, honestly one of the best mods i did engine wise, the way it came onto boost was such an improvement over the previous exhaust manifold - $1000 proboost 44mm wastegate, only used for powerplay this year - $120 garret gt30/76r, great turbo, as used by so many people around australia! In great condition, no excessive shaft play - $1000 (can include speedflow oil/water lines for $200 extra) Front mount intercooler 600x300x70 with custom alloy piping to suit above setup, easily modified to adapt to other setups in r32, built by spot on performance $450 Dump/front pipe to suite above - $100 Nismo 550cc injecters, yellow top $400 Microtech lt12s with hand controller and custom loom to suit rb25. $1200 Over $9000 in stuff, Will sell for $8000 all together and 100% ready to bolt into your r32!! This setup made 426hp@17psi, with 17psi by 4100rpm and still climbing at the low 7100 limiter in my car. It was so great to drive and if it doesnt sell im happy to keep using it! Many people can vouch for this car/setup! Tuned by 101 Motorsport,

I have some JIC fixed -4 camber arms. $120!

7 Point boltin roll cage to suit r32/4door! With base plates and all nuts/bolts! Its painted black. Located on the southside of brisbane 0423 198 820 $600 neg

I already have one of them. I want to do it the way mentioned above as i have a spare s13 cradle and want to do it this way!

Hello, My car is a gts4 origionally. I have read alot of conflicting info on this topic so i thought i would get it cleared up! I want to put a non hicas s13 rear cradle into my car. From what i read the subframe will bolt straight in yeah? Will i need to change the rear cover thingo on my diff to bolt into the subframe?? 2 bolt -4bolt. I will need to swap the bush thats currently on my rear knuckle that the arm from the hicas bar attatches too, to one so the toe rod will attatch too, where do i buy a new bush? I think thats it for now, sorry for any stupid questions!! Thanks alot!