snapper

Hi mate looking for a steering wheel for an s2 in good nick . Will pay postage if price is right .

Hi i did all the work myself but with gaskets , fluids & the solenoids all up i did not get much change out of $1000.00 . As for beefing it up i could not help you there . I run my s2 at over 14psi day in day out and i am not kind to it . My slipping prob is a gasket that came out . Not sure where it went there for my slippage prob . My advice if you do it yourself go slow and if you can prop the valve body do it . good luck with this if you want to talk about this i will pm you my mobile .

Sorry to be so late on this . I posted the part numbers for these . The A solenoid is easy to replace . The B solenoid is a pain in the arse to replace . As you have to drop the hole valve body . And if you do try this be carefull springs and shit jump out . Mine slips into second under power . As for part numbers they are correct . Solenoid A = 31940-4AX02 . Solenoid B = 31940-4AX05 .

Spotted s1 green driving from brunswick juction to perth . And yes dale it was your car straight and driving again . All is looking good and be looking at getting it registered again very soon . Great drive couple of little issues but will be sorted .

Hi reuben sorry to say i had the same troubles . My s2 was stuck in 3rd aswell . Do the self diagnosis it will tell you which solenoid is faulty . Solenoid A : 31940-4ax02 $350 incl Solenoid B : 31940-4ax05 $415 incl . They are available thru nissan . And solenoid B is a mongrel to change watch out when you take off the valve body as peices will come out .

Your right about that dale your old one is back together and running . Will be driving it back from its sleep very soon . And for the models they have all been sold now as a job lot . Thanks to those who replied . Hope to see you soon with both stags .

I have a standard rs four v , Dolphin stagea 260 rs autech , Mines stagea 260 rs autech . All 3 are brand new in original boxes . These are 4 sale . They are 4 sale as a job lot $120 + postage if in perth will deliver in metro area . These ARE ALL Series 1 . Sorry will not seperate .

Did not post it the 1st time just got back from 3on 1off . But this time side by side and no look no wave no nothing . Just ignored me like i was in a kia or something . But i say very nice s2 autech . Hope you see me next time .

Yeah chuckie is right perth is correct . It was the solenoids have replaced both all is sweet now bar the fluid leak i have which will be sorted tomorrow . I dont wish this prob on anyone especially if you are doing it yourself . Just be carefull you dont drop anything when you pull it apart such as springs and washers . But if you do good luck .

May be supplied but here i go shift solenoids for an s2 . There are 2 shift solenoids this is the problem . Please do yourself a favor do the self diagnosis on your car . But the part numbers for shift soleniod A & B are . A = 31940-4ax02 . B = 31940-4ax05 . Be sure which one you need A=$350 incl trade B=$415 incl trade . So ther goes my ruddy check .

Hi boys and girls i have had a series of let downs . As my s2 has been locked in 3rd or some peeps may say limp home mode . But oh no that is not the prob . I visited a good auto trans guy and pointed me in the right direction . I was told it was the shift valve solenoid . Sweet i thought go and order this part and fit it myself . 3 weeks later with filter , gaskets and solenoid . Its just the same $500 don the drain . Then found gbox trouble shooting on this forum . Nissan supplied me the wrong part ! The part they told they were going to supply was not the part that i was supplied . Now ordered the other solenoid . Another $415 i hope this works will be fitted tomorrow . fingers crossed . Here are the part numbers for solenoid a & b . solenoid A - 31940-4ax02 solenoid B - 31940-4ax05 . PLEASE DONT LET YOUR PARTS INTERPERETUR SUPPLY YOU THJE WRONG PART !!!!!

Hey Chuckie very interested as i missed out last time will have both stags there with any luck . Just need a date . Thanks Cory.

Just to throw another spanner in the works . The switch for my dayz kitted s2 is on the indicater stalk . Similar to the wiper delay on other side .

I will give you $100 for all + postage

Hi should have 1 soon for an s2 auto .

spotted s2 stag black about 7pm thurs night turning into padbury drv gave a couple of beeps hope to see you around soon

Hey Dale she looks alot straighter than that now hope to have her back on the road soon but working away puts a big dent in getting things done .

sorry to be so late into this problem from my experience . I have found after weeks & weeks of sorting under boost & under standard boost i did have a break in the wiring loom for th coils . have been running up to the boost cut in an s2 for 25000 kms and have had no dramas . still run this boost now and looking at running more with a greddy profec b . good luck hope it works out for you soon .

Unfortunately when you put 15psi in a s2 you have hit the boost cut. And she slows bad . But i drove home and the leggy got home very difficultly . But 14.5 consistently all day in AWD class and to take out the championship me be very happy with my slow stag .

Hi guys & gals any info in finding these parts would be appreciated . Any price will be considered . Thanks Cory.

G'day mate sorry about your loss but interested in front bar , reo bar & bonnet . If still got please !

Hey brad i know i have taken my sweet old time but i put my payment in yesterday in morley i hope you can find it . Thanks Cory

sounds great but what is the cost please !

thanks the info was great got rad support for under $350 inc !