Luke_ENR34

Looks like im gonna return the 2.5L swirl pot and go a bigger 5-6L swirl pot to be safe So i dunno if someone wants to buy it off me or i can return it but its a 2.5L pederson swirl pot. Think it was $175 but i'll double check tomorrow if anyones keen

Thanks heaps steve-o. I managed to get the Bosch 1600cc direct from the USA for $740 del. Reckon I'll swap my swirl pot for a 5L one just to be safe. Planning to drop the fuel cell through the spare tyre well. I'll be going all the speedflow fittings to

Hey Martin did u get my Pm about ecu choice? I'll bring some tools to help out those ppl that need it

Thats awesome mate, Really helps. I got a 2.5L swirl pot. Would u recommend going bigger? say a 5L. Will be going down the 26/30 track later on and wanna get all the fuel system sorted now. Cheers.

When i was asking about the cell I purchased they mentioned it was fine for e85, methonal, alcohol etc. I'll be going the Weldon pump for my diff and trans cooler

Just go fuel cell also

Been told to run the swirl pot since the car is a circuit car. In a drag car you wouldn't need to. Just what I've been told. Thanks for all the info guys, keep it coming

The cell is alloy and theres no fittings on the inside to mount anything. Been told by a few people that the foam should be ok for E85. Will also be running a few fuel filters to make sure

still street rego'd, will be on permits for big cruises, main focus is to have it so i can drive it on the rd if need be and let loose on the track when i can.

Autosport here in SA. http://www.autosportdirect.com.au/index.htm

another 7hrs spent working on the car today. Basically its almost ready for all the seam welding to be completed. Gotta drop the rear subframe off to be sandblasted this week then get that welded and braced up. Cut out the spare tyre well and make something up for the fuel cell to be placed in. Also do bracing in the engine bay All happening.

Over 20psi is defiantly gonna be happening later on. Cant use a gtr pump as i have a fuel cell and need a external pump off the -8AN fitting.

says on rays nuts to do them at 118nm. usually $160-180 direct from japan

CRD has put me onto a Bosch pump which flows 130 litres per hour @ 5bar. Really need a lower pressure external pump.

i got a r34 N/a one, In adelaide tho.

Are your tyres bald?

Are your tyres bald?

Damm why cant this be later. Wanna debut my car somewhere lol

hey mate, have u got the actual handbrake and the wire that goes back into that little swivel thing where the two wires connect to?

Hey guys Doing a fuel set-up in the 34 to run E85. So far ive got: RCI 15 Gallon fuel cell. Gravity fed, baffled, foamed, 2 outlets on the bottom, one vent and a inlet on top Pederson Swirl pot 1600cc Bosch injectors Sard fpr 2x Bosch 044 external fuel pumps Just wondering what low pressure external fuel pumps you recommend to use as lift pumps to get the fuel from the cell to the swirl pot? Also can u guys post your fuel setups? Wanna get some ideas of where to mount what. Cheers

Awesome, Im keen for 1260cc bosch's Also any chance u asking about 2x bosch low pressure external fuel pumps. See what they offer Thanks mate.

Can u get bosch injectors ben?

I got one, located in north plympton

What u need nigal? I got heaps of hoses

Krishy u want your beer mate? I dunno if I can make it but swing by the workshop if u like. Couple of ppl will be here.