R32-GTS

I have a mate whos broken 2 motors after he completed his plenum mod. Whether or not this mod caused the leaning out on one cylinder is debatable and needs more evidence for it to be blamed.

Nah its a RB20 not a RB25 haha :bahaha: :bahaha:

Will get one as soon as the TD06 mashes this one too pieces hahah.

Well i don't think my power FC is gonna have arrived by wednesday so i could be sitting out. I will see how the car is on the dyno with the 550cc injectors . Its mapped for 440cc injectors. See if i can pull some fuel pressure out maybe . Took it for a drive last night , feels like its gonna pull strong. Still gotta get a dump made for the external wastegate so im thinking wednesday night is gonna be out. When this td06 goes on , if it can make 350 at the wheels then i rekon a high eleven could be on the cards. (maybe)

Nah , more likely your cars not making any power haha :shake:

I just put Redline MT-90 in my box and its quitened it down a bit. Quite alot actually. Its thicker than MTL thats why its quieter. If you want it quieter use some thicker oil but the trade off is slower gear changes.

Yep, get used to it. When you give a rb20 box a hard time for a while they start to get noisy. Mine was dead quiet a few months ago now its starting to get rumbly. You can change the bearings but it won't fix it. It's the meshing of the gears. Just gotta live with it.

IF the 8cm exhaust is too small then i will fit a 10cm exhaust too it

Yeh its a small housing on it. Still big at the front though. Apparently a few cars have gone 400 at the wheels with one of these turbo's with the small exhaust housing. And yeh motor is stock just got bolt on's but should have some cams in it soon and the Power FC.

Rob it has a 8 stamped in the exhaust housing.

All i know rob its a TD06 20g with the smallest exhaust housing. Its about the same size as a vg30 exhaust housing so should spool up ok on a rb20.

Non Contributing Business.. If you believe this is in error please contact a Moderator Cheers

I heard Dent Craft is the best guy on Perth for Guard rolling. $50 bucks a corner. He says no paint cracking etc etc because he heats the guard up first. Mines getting done next week.

I just saw yesterday a TD07 with the biggest exhaust housing iv'e ever seen. Was bigger than the comp cover. Im thinking nothing but a rotor would be able to spool that thing up. Iv'e just bought a TD06 20g for mine with the smaller exhaust housing so should be a good thing.

They are the same injector . But for some reason some are white tops and some are purple. May vary depending on the year.

NICS and RED top ECCS are 220cc low inpedence. R32 has 270cc high impedence

THe injectors are different . Even on the red top. So get some first hand experience before correcting me.

I run 18psi on ah i flow no drama's . Make sure u got enough fuel though

haha no comment

Let me drive it Paul I'll get you an 11

Lets see Paul do better than a 14 :shake:

Lets see its internals spilt on the floor :shake:

The injectors arn't the same . R32 has high impedence 270cc . R31 has low inpedence 220cc.

Yeh i'll be in for that steve. thanks.

I can't believe paul is still whoring from Adelaide hahaha :bahaha: :bahaha: