Jebu.32

Hi Mik, Any chance you have a pair of 02 Sensors for sale?

hi, I've already changed the plugs and gapped them. I've done this today and so far still no improvement: 1) Changed injectors 2) Swapped TPS 3) Swapped fuel regulators 4) Removed boost controller The problem is still there. I tried to slowly accelerate, it seems to be fine until about a 5-6k But if I try to gun the throttle, if misfires immediately. I honestly don't know whether its fuel related or sensor related. It doesn't seem so bad when the car is cold, but as i drive it longer, it gets worse. One more thing that I haven't tried is the O2 sensors. According to the PowerFC reading, the O2 sensors at idle are: O2-1 = 1.2v O2-2 = 1.2v But when I WOT it gives me these readings: O2-1 = 0.6 - 0.8v (roughly) O2-2 = 0.6v Could the O2 sensors be on the way out? I'm pretty certain other parts are ok. Just want to narrow down the problem areas.

Sorry i forgot to add that the knock reading on the PowerFC is 1. It NEVER changes on rev or idle. Could it be related to a knock sensor problem? Are the symptoms similar to what I've described? Any thoughts appreciated.

Hi, I need some help with diagnosing an irritating misfire problem on my car (R32GTR) The car misfires/currently cuts out at about 4000rpm. I've already done the usual checks and replaced/tested these items and they have turned out to be ok. - AFMs ok - Ignitor - swapped with known good unit - New coils - CAS - swapped with known good unit - No tears, leaks in hoses and piping. Im currently using PowerFC and no errors are reported on the sensor/sw check screen. I'm suspecting that it might be an injector leak or injector failure? Just thought I'd run through you guys first and see if maybe one of you have experienced this before. Anyway thanks in advance for the help.

Thanks for the quick reply Paul. Just got my PowerFC and still not familiar with all the features.

Hi, Anybody has tried using RB20 AFMs for RB26? How do I set the RB20 AFM setting in PowerFC? Are there any difference in the setting with using RB25 AFMS? Any advice is appreciated. THanks.

Hi Ronin. Yes you did! Thanks for the advice as I'm putting my posts everywhere can think of.

Hi, Do you still have the upper left J-arm? This is the part Im looking for: http://www.skylinesaustralia.com/forums/in...t&id=100963 Do let me know. Either PM or email me at [email protected] Thank you.

Hi guys, I'm looking for the front left J-ARM and its corresponding lower ball joint for my car, as mine is currently wobbling. The problem is that I'm in Malaysia and I would need you guys to mail it to me. I can pay through Paypal or bank into your account. Please let me know if any of you are wrecking any 32 GTRs / GTS4s (as I believe the 4WD J-Arms are the same) Please look at the attached pic for further details. PM or email me at [email protected]