4drftn

if the wheel isnt too badly damaged take it to your local bodyworks, if its just scratched or guttered they will rub the gutter marks out and repaint the wheel (if alloy) in 2pac... quoted $70 - $80 a rim (17x8) for my commodore... brings them up nicely

BA falcon has the same as an r33 skyline, but using it as a spare it may have a different profile tyre, but it would be ok as a spare to limp you home... and ,maybe BF but unsure about that

anything 5x114.3 for an r33, some fords i think later model fords have the same... and some toyotas aswell

if you can get your hands on the phone book you might wanna call them... but most places are only onpen as long as 1 o clock. try mastertint they could be open

supertrim ad just come on... they do it, im thinking about doing mine, i was gonna go to mastertint or is it supertint, the one up from the block...

http://cgi.ebay.com.au/R33-SERIES-2-EYELID...1QQcmdZViewItem i bought my series 1 eyelids of ebay, the series 2 eyelids tend to go cheaper...

i do the same the... what about the back???

iv got the same problem it takes a long times for the heaters to kick in and when it does its not the hottest... and i have a mate that doesnt get any heat what so ever... might flush radiator and replace my coolant... whats the best type of coolant to use???

Hi mate welcome my car pushes 300hp at wheels my mods are Front mount intercooler larger turbo 550cc injectors microtech ECU walbro fuel pump dump pipe into 3" HKS POD Hope this gives you ideas for mods mate... cheers

no worries... finding hardner and primer in 2pac will be hard unless you can find a paint store, supercheap and autobahn ect. only sell acrylics... talking to a guy at ardense paint store he told me they are gonna push to make it harder to sell 2pac to anyone over the counter because of the dangerous effects and stuff, iv got 2 pac reducer but thats not what your after... have you tried to go down to your local bodyworks or any in the area? maybe they can sell you some...

... iv been painting with acrylic, when i used to work at a body works we used 2pac, but you can get the same result with the acrylic paints, hit it with more clear. people use 2pac because you can get a better shine without the effort, and it has a faster drying time. thats why they use it. but if youve got the time acrylic will be fine

mind you bodyworks probably wouldnt use acrylic though

would you consider using acrilyic paint its cheaper... and if your doing it in the backyard without respatory gear its alot easier on the breathing gear...

iv put tachos in many times, autometer being the easiest... best way to do it would be to take the cluster out and pull the plug out from behind the RPMs and then start the car and put the wires on the pins on the back of the plugs until you pick up the tacho signal, then splice or solder into wire behind the pin... thats what i did for my girlfriends lancer... also if the signal doesnt read accurate check your earth wire, make sure its secure, a weak earth will make it inaccurate. better earth more accurate. test light will aid you

hey guys iv searched to see if anyone has had this problem and yes but its not the same for the fact that it sometimes runs fine (idle 800ish) and other times it idles hight (1300ish +) and misfires, i thought i had the problem fixed by tightening my intercooler pipes but after a decent run in the block one night it happened again the next day... reading others problems it can be plugs, AFM, hoses ect. but thinkin it cant be any of these because sometimes it goes back to running fine... can it??? mods - walbro fuel pump FMIC 550cc injectors microtech LT-8 ECU HKS POD dump pipe into 3" bigger turbo

just go to you local auto paint shop... what is it your painting?

it could be your intercooler piping... i know when mine was idleing hight and ruff it was the pipes... the clamps over the silicon were loose. tighten them one weekend and car was fine

what about the sedans? will the coupe headlights suit sedan? or are the sedan headlights different to both coupe and GTR?

I know there is a difference between the R33 series 1 & R33 series 2 headlights, but i have an R33 series 1 and recently bought new lights and fit them... now, i bought another set of headlights that are chrome and was told that they wont fit a R33 coupe, only sedan or GTR??? Is there a difference between the sedan or GTR headlights compared to the coupes??? I have pictures below... If so your info will aid in helping me and others that ponder over this question... thanks

mines idleiing ruff and misfiring

hi, after a bov with a adaptor for r33 rb25t so it can bolt straight up to my crossover... after decent one not chinese copy. i have an apexi bov at the mo but its not hooked up and probably cant cause adjustment screw is missing, will it still operate??? would like similar thanks

and have you got bov... dont think mines any good?

how much for the passenger side door power window regulator???

IF YOU HAVENT SEEN BAD BOY BUBBY... I DARE YA!!! then get back to me hahaha :laughing-smiley-014:

any alternatives to fasten them on? dont really wanna use sikaflex or glue though... but at the same time my car doesnt see the track, double sided tape probably ok for daily driving OFF THE CLOCK!