DR30RS

I had the large china cooler in mine.Although i didnt run above 16psi boost,it did an awesome job of keeping intake temps down.Be wary of the bar and plate design for track work if sticking with the factory radiator though.

Can i ask why you want an aftermarket plenum???? Ben Diggles run 9.1 at 150+mph with a nissan intake manifold. How much power do you want to make

http://www.duttonrally.com/results/2007/Wa...ight_Driver.pdf looks like the subarus had it over the Evos.Some interesting results. Pity they only had 1/8 mile drags.

have had many requests for more pics by mail,thought id add them here.

1983 DR30 2 Door coupe I have owned it for past eight years and was bought in as a private import. car is IMMACULATE inside and out,always garaged and has travelled 5000kms sine ive owned it. Has many modifications but only done if could be reversed to stock condition. Rebuilt motor with forged Arias pistons and Tomei cams/cam gears.Engine fully balanced. GT30 turbo with 45mm ext wastegate,Wolf ecu and many other parts to run a reliable 350rwhp on pump fuel. Rebuilt turbo 5spd and 4.4R200 lsd. Coil over suspension(Tein rear and Koni front) and 200SX 4spot brakes.Lightweight Enkei wheels. I have all original parts and also availible complete Dr30 turbo manual front cut.located in Perth but can arrange freight if needed. $13500. Please for serious enquires email [email protected].

I have and can recommend Steve Lee and Steve Thomas of Top Racing in carlisle

I can recommend Steve Lee at Top Racing in Carlisle.

I have an FJ20 front cut f/s,if anyone wants a real motor in their Datsun let me know....

My car is 1983...i thought that was old skool.But you guys are going 70's! Thats porn.

Now that sounds like a workshop with the lot! Hope to see it soon.

My local Nissan dealership(Midland Nissan Perth) supplied my head gasket,all chain guides and sump gasket etc.Bearings are availible through repco,veale parts shops in either acl or ntc brands.Take your timing chain into your local trev speed shop to match one up(mine was made in germany)and shortened to fit.about $80. If your head is ok,mine cost about $2200 with arias pistons,all machining/oringing,balancing etc.You save the money by making many phone calls and doining the labour yourself. Good luck Todd

Forget an SR,these guys have the plan....RB26!

My front King springs are rated at 325lb from memory and are more than stiff enough.400lb may be a bit teeth shattering for the road,but they are cheap to replace should this be the case.

GT30 turbo,external wastegate,550cc injectors,wolf ecu,bosch fuel pump and front mount cooler. The power output is only restricted by using pump fuel.The boost is set at 19psi but im told the turbo will come alive at 25psi. As for the cost i only paid for parts as i fitted and wired it all.The best money ive spent i know that much! Todd

I have recorded several 119mph passes and recorded 350+rwhp.I have had no trouble from my little FJ box.I have 2 spare FJ boxes,thinking i would be killing boxes all the time, but have not had to use them.Maybe i am too sympathetic with it.