FuManChou

BUMP

BUMP Comon guys these are great parts and I need to sell them to fund my project. FuManChou

BUMP

Could be head gasket or compression rings.

best pickup for oil temp is sump

If you google you will find a formula that determines piston speed. From memmory 35m/s is the most avg piston speed but that may be wrong. It really all depends on stroke vs bore etc. Also the factory crank should be turned to no more than 9000rpm having said that you can go higher but how long it lasts at those rpms is anyones guess

R33 GTR ecu will run the engine and by-pass the imob circuit but the ecu harness plug may be different

Ive found a good grade mineral or semi-synth oil is best as you still need the oil to give protection as proper engine run-in requires that you load the engine up ie up hil high gear low revs which loads up the bearings

Turbo Setup suit RB26 Have decided to go a custom single setup so this setup needs to go. Turbos - Garrett GT28RS. Each turbo is internally gated and rated at 350HP each. The exhaust housings a 0.64. Manifold - Are custom stainless and have been trial fitted and fit perfectly. Dump Pipes- These are also custom stainless and also have screamer pipes to improve flow and give that awesome wastegate sound. $3000ono R34 GTR Wheels These are R34 wheels that I had stripped and polised. Havent been on the car since having this done. Tyres are 245/35/18 Bridgestone Potenza's with 80% tread all round. No gutter markes or scratches as shown. $2500ono R33 GTR Brembos These are Brembos removed from my R33 GTR because I am upgrading to a G8 Kit. The discs and callipers have 70,000kms on them. Pads as can be seen are fairly new with plenty of meat. $1500ono Located at Tuncurry NSW (3hrs north or Sydney) [email protected] or PM Prices negotiable and freight at buyers expense.