bernardshorty

hey duncan,i think the passanger one comes out the front inner guard. if not it comes out behind the storage container in left rear of the car easyest way is to spray soapy water down the top and use an air blower,you will soon see as it bubbles madly where it comes out hope this helps mate. cheers

hey cy,just had dash back out finialy fixed that dam creak.under it stupid spot wields on the seams,but all fixed now.also the compression is even now must of had carbon build up on that cylinder.thanks for the ride bud.

hey bud does your stagea have sun roofs,if so its prob the drains for them as they go all the way to the rear and come out right near the fuel filler . hope this helps .

hey guys im looking for a decent top mount manifold to suit a hybrid t34r turbo,also looking for a 48mm wastgate as well. for my stagea .thanks in advance guys.

hey guys im looking for moulded mud flaps front and rear to fit s1 stagea and also a rear wing to fit one as well. thanks in advance.

hey duncan where can we get one and how much are they .cheers

its leaking from the dain plug. someone has had it out and never sealed it.thanks for ya help guys hey duncan where can i get me some of that transmax from.

im 24 love my stagea .so what up with this theory?

hey guys my transfer case is leaking oil and i am about to fix it.just want to no what oils other people are using . cheers.

hey yours is that fkn sick green one i see driving around ha ha we will get it soughted bud .and funny you say that about cy ha ha na he is a top bloke . thanks for ya old ride cy.

and dude you no by pulling your drive shalfts out. that they are the only thing holding your front wheel bearings together.as they dont have a stub axle to bolt them in with . ganna look sweet driving down the road and your wheel overtakes you right after it rips your guards off real sick. any other bright ideas does any one listen to that guy .

yeh that is what i think. and maybe should hang out on a mini truck sight that is where people go to dribble shit. they do stuff first then try figure out they f####ed up so then they just run stock rims . yeh low is good for shows but my stage is a daily drive car and cops in australia dont need another reason to give you some arse action. and the roads i agree they could not get any worse.

mate your obviously not from australia as we have 100mm ground clearance rules here. no offence mate but i have owned bagged minni trucks which dragged rails and you still need wheel clearance. or you become good friends with the pannel beaters real quick.stageas are mad roll around cars and not ment to drag arse its all for the looks and style why your rollin.

thanks cy its alredy done. just finished putting back together ready to drive again

hey there they are same off set as late model falcons au ,ba etc also camry and magna .if that helps i also have 18 by 8.5 which are brand new fitted friday and car never got driven due to tie rod ends were buggered. 1550 if any one is interested they are black centre with pollished lip selling due to ordered my 20s seen the style and fell in love with them still black centre but have 3.5 inch dish so old ones have to go to make way for new then the fun starts to fit them to my car but hey like a challenge.

na def not you tangles he is looking to fit 20s as am i i have 20 by 8s coming for my stagea . just ganna make them fit. had to on my other cars and the stage wont beat me either love to see pics of your car tangles sounds like a sweet ride good luck with your tune bud.

you no i was told this is a place where poeple offer help? so far all i have seen is someone who pays out on other people .so what how it is writen or spelt if you cant get what they are saying why comment? i dont get it arse clown

what you racist brother speak how i want to ok mum

thanks cy i will look into it and thanks tangles i love my stage big plans for this car as bigger turbo is sitting on my bench its a hybrid t34r top mount manifold 48mm externial gate and thing everyone loves ? the screamer pipe in process of getting 750cc injectors z32 air mass meter just arived as well . ready to start the fitting process soon . oh and cy that fuel pump cradle arived today after a week of it being lost in transit so no more fuel smell . stoked as ha ha it to cold to drive around with windows down.

tell em bud gee i not smart as some say on here but i fairly sure you said it clear enought (what is the biggest size any one has seen or herd of fitted to a s1 stagea )holy i think i just strained my self. piece out bud

hey bud if you have access to an air compressor blow them out with an air blower usualy does the job cheers

and i would like to say sorry to the guys who help and like to help others . this was not directed at you guys only the people with nothing better to do in simple term if you want your joints fixed which i done and liked call his numbers which i have posted

hey guys sorry if i not write perfect but unlike some i dont sit at a desk i only get a few mins to write this up between jobs. i hope it helps some people and as for the reclamping bit no he injects them with pollima its stuff nassa uses and invented . what happens to ya joints is the plastic insert inside the housing which cups the ball to stop it moving wears and that where ya movement comes from. he fills the joint wiht this pollima and it goes off hard it is a lot stronger then the standard plastic insert. he also greases the joint to prevent wear and fits a grease nipple to the joint as well so you can service it unlike the standard one which is a sealed unit that is why they flogg out. i have a brand new nissan joint i orded and the difference in the joints was so noticable the genuine one moves so easy and the rebuilt one is a lot tighter and i think better but all i can say is ring the guy and he will explain it alot better then i can . in the end its your choice i was only trying to help in the future i will keep to my self . only reason i posted was cyrus told me you were a top bunch of guys from what i have seen i here most are top lads who like help and like to help others . cheers to you guys and others keep paying some one to fix your car for ya . i can handle a joke but if your problem is my education then get a life

well mate if you can do better then me at finding them let me no cause i have searched every where and measured you name it i have done it and no one makes one with a big enough taper the thread yeh heaps fit but the taper which is 13mm at top and 16.5 at the bottom no one makes you can try one that goes close to fitting and it will chop out quick as but hey what would i no i only a mechanic but i open to be corrected dont get me wrong but as i say i could not find a company that made one of that taper i posted this as i hope it can help people your choice if you do it or not it has worked for me and have no complaint of the speed and quality of repair i been a week trying to match it up and alot of failed attempts and this worked for me that is all i can say but if some one can find non gen post it love to find a cheaper option as every one does cheers guys

yeh bud he is called the ball joint doctor he does all joints he does a mad job i sent him mine this morning and he called me and said they are on there way back now his contact number is 02 66582898 or mobile is 0411862496 he is located at sawtell nsw top guy does his job quick to keep you on the road with hardly any down time hope it helps some of you other guys if yous are waiting on tie rod ends i also have 1 genuine one for sale as well brand new in box only could get me one in australia hit me back on here if any one is interested