spenda

Pm sent

long motor and carbon bonnet gone now too.. only the first four items left for sale

make me an offer guys.

intercooler, surge tank setup, radiator, spoiler and dash cluster gone.. make an offer on the rest of the stuff need it all gone.

It was bought overseas but i got smashed with nearly 600$ of import taxes.. There is no throttle cable with it but yes the linkage is included.. You can see it in the photo on the left hand side of the accelerator pedal bolted on.

Hey guys have a Tilton pedal setup brand new never used comes with everything needed besides lines.. Cylinder sizes are 2x3/4 and 1x7/8.. Only thing is the remote reservoir mounts have been chopped for a different mounting position... Please note this is not a bolt in job.. will require some fabrication skills at the bare minimum Price is $1900 - located in mackay qld but will post anywhere

am negotiable on prices.. make me an offer

hey guys need to get rid of the following parts..dont suite my application anymore 1 - Blitz Dual Solenoid Spec R Boost Controller - $325 2 - Power Enterprise 800cc Top Feed Injectors x6 - $650 - Never seen one bit of fuel 3 - Ase Catch Can, Painted black with -10 drain welded on - $100 4 - HKS Spf Reloaded 4" neck Air Filter - 100 - Pretty Much New 5 - Surge Tank Setup With Bosch 044 and all lines in picture - $180 6 - Mspec Alloy Rad With Two Thermos, Not sure of brand and size of thermos, they work though haha - $200 7 - Greddy Bar and Plate Intercooler bent at bottom and top from some idiot jacking the car up with it :S - $120 - Still holds boost fine just bent 8 - R33 Dash Cluster - $85 9 - R33 Standard spoiler - $60 10 - R33 Carbon Bonnet in nissan black, very good condition.. ill have to get some actual pics of it but its the exact same as the one in the pics ive put up. UAS sell these for 1200 unpainted.. i will let mine go for $800 11 - RB25 long motor - is in brisbane atm has head oil drain mod and two -10 fittings welded onto sump.. rocker covers need resealing as they are leaking.. other than that runs very good, not sure of compression did not test before i took it out.. does not come with exhaust manifold, upper half of intake manifold, injectors, coil packs or power steering pump.. motor has oil on it at the moment from the leaking rocker covers and unless i can convince my mate who will be meeting you for the sale to clean it, thats how it will stay.. as unfortunately i am in mackay and wont be back until april 30th for a month Price - $950 anyways pics are below.. pm me or msg me on 0433549640, im on nightshift at the moment so msg me anytime of the day. located in mackay qld.. i will be in brisbane for a month after april 30th so if you live down there and want a big item let me know and we can sort it out.

hey guys need to get rid of some stuff from the r33, doing an engine conversion so no need for any of this gear RB25 long motor has head oil drain mod and two -10 fittings welded onto sump.. rocker covers need resealing as they are leaking.. other than that runs very good, not sure of compression did not test before i took it out.. has a ross harmonic balancer on it atm but i took the front half of the pulley off as i only planned on using an alternator on this engine so didnt need the extra pulley. i have the rest of the pully but would need new m8 cap screws as mine were all rusted. these can be bought for under 6$ does not come with exhaust manifold, upper half of intake manifold, injectors, coil packs or power steering pump.. motor has oil on it at the moment from the leaking rocker covers and unless i can convince my mate who will be meeting you for the sale to clean it, thats how it will stay.. as unfortunately i am in mackay and wont be back for another month or so.. Price - $1000 RB25 Gearbox around 140k kms on the box, was treated with care as it had a panzy owner (my mate) before me and i only drove it 1000kms to mackay then parked it up.. in that time i treated it very kindly too.. not one skid or roll back or whatever.. price - $1200 OS giken twin plate Rebuily by NPC no more than 2000kms ago if that.. what more can i say, its a clutch price - $850 All items located in carindale brisbane.. pm me for more details, sorry for no pics but im in mackay atm.. my mate or brother will be meeting you for the sale but i will organise it all

hey guys time has come for me to get rid of my engine, most other parts are already gone now anyways, well either sold or on my r33 haha anyways here is the specs list sr20ve p11 head which has had full reco supertech oversize valves +1mm intake +2mm exhaust supertech valve springs supertech valve guides titanium retainers franklin cams low intake 10.1mm 228deg - low exhaust 8.3mm 224deg high intake 12mm 288deg - high exhaust 11.8mm 288deg new oem rockercover gasket kit new oem sr20ve oil pump new oem sr20V CAS new oem timing chain kit gtir style oil groove channel in mains on block s15 timing chain tensioner os giken cam gears Tomei 1.0mm MHG mazworx 1/2 headstuds mazworx mainstuds mazworx vvl solenoid relocation blocks mazworx modified oil strainer mazworx vvl solenoid lines cp pistons 86.5mm 9.0:1 manley turbotuff I beam rods acl race bearings taarks timing pin relocator New SR20v Rocker Cover Mild Port Work + Head Reco tomei n2 oil block Trust sump All Balanced Water pump blanked off with Custom plate made by Taark, has had 2 x -6 jic outlets welded on for turbo and head water feed (was planning on using ewp) Brand new alternator not genuine nissan but oex i think the companies name is.. custom bracket to suit Ross Harmonic Balancer - front half will be included just not in pics Why i say its not 100% complete? i measured everything when i got it back from machining and found that the bearing clearances were .07mm on the mains.. i phoned him up at JHH in brisbane and he said that i could not be right.. decided to put the engine together anyways. if you buy this engine i would highly suggest you get him to disassemble it (bottom end) and check his machining, get new bearings and re-assemble.. he will do it cheap because he will remember me and how i phoned him about this.. will also need a water pump if you dont want to go with an ewp other than that the engine is pretty much complete, there is some scratching on the rear of the rocker cover where i took out the breather fitting and it was rubbing on my firewall.. engine will come with spare alternator as i modified my new one to suit the bracket i made, also greddy pully to suit greddy water pump pulley ps pump with greddy pulley nismo thermostat water pump inlet and outlet and thermostat housing with -16 jic fittings welded on and maybe a starter motor if your lucky anyways the price is set at 7.5k + POST - yes i am willing to send interstate if you price up all those parts and machining it would be welllllllll over that price!! pm me or msg me or call me on 0433549640 - you will get the fastest response by calling me as i am getting pretty lazy at checking my emails and stuff haha

hey kinda interested in the headlights if you want to sell them.. what is the drivers side one though? is it just a blacked out headlight or a dummy headlight? wish i had alot more money atm i would be buying alot of the parts off this car!! Edit - also how much for the door trims?

hey guys selling some of my gear that i dont need anymore, all of it is in excellent condition.. dont have individual pics of the gear as its all still in my s14 in brisbane HKS t51r spl-bb 1.0exh - $2300 mazworx intake manifold no rail - $900 helps exhaust manifold suit hks T51r on sr20ve - $450 haltech e8 + Flying Loom - $775 msd blaster ss coils - $200 msd super conductor 8.5mm leads + crimp kit - $75 msd dis 4 plus - high output - $700 nismo engine mounts - $170 you will get the fastest reply by sending me a txt on 0433549640 happy to post this stuff anywhere.. more parts to be added later ie my sr20vet engine

sorry to get off topic but i guess its a free bump anyways it must be the old style of housing as this is two pictures from the same add on ebay usa

keen for pics of the rear guards pm sent

has it got the compressor cover with the surge slots or drilled surge holes? might be keen on this, hoping it has the slots as i am not a fan of the holes what so ever

Wastegate Sold.. all the rest still here

spewing, wish i did haha!!

hey guys change of plans with my s14, no longer want a laggy circuit car/drag car.. going for response and simplicity.. that said, the following parts are now up for sale sr20ve t51r turbo setup Hks T51r Spl BB 1.0 Rear - $2200 - was previously owned by sau user "rb31" who had it on the infamous black R33 gtr with plates "r33" only used to on dyno runs and a couple track days then downsized to a hks t04z, since then it has not been used at all just sat on my manifold looking pretty. i have however cut the outlet of it off and started to weld a tight radius bend on it however didnt finish, hence the cheap price. Tial 60mm Gate - $550 - Never seen a puff of exhaust in its lifetime.. as new, however you will need to source a vband flange to weld on to your manifold as i used it on mine they can be sourced from mtq or whoever sells tial for next to nothing. the outlet side has not yet been welded so that will definitely be included in sale Helps sr20ve t51r steampipe manifold - $450 - title says it all, its a manifold for a t51r on sr20ve head, copy! i will seperate all items, however if by some slim chance someone wants the kit i will let it all go at once for $2900 which is $300 cheaper than all up MSD ignition setup Msd Dis4 Plus High Output - as new, seen maybe 500kms of use - $650 Msd Blaster SS Coils x 4 - VGC, bought used but in good condition and still are in good condition - $250 Msd Super Conducter Red 8.5mm Leads x 4, complete kit Brand new, Cut to a very generous length, i think they might even be crimped already too cant remember - $50 Is someone wants the whole msd kit i will let it all go for $800 thats $150 cheaper than individually.. but am happy to part individual items anyways dont really think i will be neg on these prices, i think they are very fair.. if you don't, please feel free to show me a good example of somewhere cheaper except US of A or other countries! these parts are in australia waiting to be posted, i am a very trustworthy seller and have many people to vouch for me just maybe not on sau more nissansilvia.. pm the sh.it outta me or send me a txt on 0433549640 spencer

so so tempted by this, if they are still here on tuesday i think i will have to buy them..

hey buddy im keen as to buy the pump please pm me your number..

thats an awesome burnout vid... excellent

would you seperate the coolant breather tank? im assuming its hypertune as well?

http://nissansilvia.com/forums/index.php?showtopic=468965&st=0&fcat= any chance you want to swap a pair of the 9.5's for a pair of my 10's + 15, they have never even seen a tire haha they dont clear my coilovers on the front and will need spacers... they seem to fit gtrs fine though keep the updates coming, the 32 is looking so tough!

hey, thanks man.. yep for sure.. if im at jambo ill find ya and have a chat.. would love to see your car in person, im sure the pictures do not do it justice cheers, i will most likely be getting rid of the kit... you got me all paranoid now lol.. cant be bothered setting it up anyways.