Proximity Motorsport

if your not in a huge rush, i will be doing a second group buy on 6boost manifolds.. it will be approx $1200 for twin low mount ... lifetime warrenty.. cheers, pm if interested... looking around 3 months time though

Hey, pulled off rocker covers to get painted and found my cams are rusty. Car hasnt been running for about 6 months... any idea if this is okay or not? cheers

that link goes to a shelby and some other yank tank racing.. still a decent video

sold

thanks alot for the help guys, that sorts me out, My car never had one when i got it so i wont bother trying to hook one up, when i get it running i just hope she runs alrite, thats alot... if i have trouble with the A/C or the P/S stalling me ill just bump the revs on idle to 1000rpm or something. Thanks alot for the help, Happy new years ps...just for the record my old r32 had map sensors power fc djetro and it needed the aac valve, but when it was fully open was still not getting enough air so i left it on, but i also opened the throttle a little. cheers

you mean so the throttle only closes 98% or something.... i heard this can be bad when you back off, the revs dont drop quick enough?? true or false anyone?

Hey, I just purchased a R32 with RB25 in it. It has a Microtech ecu. Now the standard plenum was removed from car when i bought it, and a greddy copy was dummy fitted. After inspection, the standard plenum has a plate over where the AAC valve went, and its been sealed, and the new plenum, which owner said was purchased second hand, has had the hole welded up, and im confused as i dont know how the car will idle? I dont know a single thing about microtechs..but to me i would think you will need air somehow to make it idle.. Any Ideas? Anyone know of removing aac valve how to keep car running??? Problem is i havent started car yet cause its all in bits, and ive never heard it running

bump

please.... any idea?

Hey, I have a RB25DET in my R32 GTS-T and its got a greddy copy plenum on it and it wont clear the clutch master, so i have put an r33 one in. Its brand new from nissan. I have bolted it to firewall and its connected the fork to the clutch pedal. I have filled it up with fluid and cracked the bleeder down the bottom and nothing came out, so i tried to take the bleeder right out and no good. So i cracked top bleeder and nothing... so i took the hydraulic hard hose off and still nothing, i looked inside it and nothing blocking it!!! So i put some vacuume line in and cracked top bleeder, and air is going from bottom through to bleeder... now im completely stumped as to why no fluid will go through the bottom hyd lines!! any help is greatly appreciated! thanks

just went to battery pro and got the odyssey one. He tested it and its rated at 265cca but it cranks at 450cca. thanks anyways

hey, Im after a new battery and it cant be much bigger then the odyssey PC625 which measures L170xW99xH175 This battery is making 265CCA and the shops in town are telling me its a motorbike battery and wont run a car. My brother has an odyssey in his car and its slightly smaller than the one im lookin at. His car s14a does have slight cranking issues, just cranks a few times befor she starts, but it has never let him down. Just wondering how many CCA a car battery should have. I dont have subs or anything. Just a r32 rb25 and small speakers

wow... i say that strut brace did its job to an extent, i bet it held it together a little bit. I purchased a r33 s2 with catback and power fc with stereo dvd and wheels... paid $4k and sold it all for 10k in parts and kept the wheels and stereo for my car XD (it wasnt my car, nor did i crash it, i baught it off insurance though)

ugly gearknob but haha... and very dangerous not wearing the glasses!!! I hurt myself on the lathe at work the other day... 4 stitches

bump bump, let me know ti2l. I need to sell fast as i need to pay off debts!!!

Hey, I just purchased an r32 with an rb25 and greddy copy plenum is on it. Just wondering where i can get a custom throttle cable made. I have looked all over net and only find pre made ones. I heard through work mates a place in Melbourne makes them. I cant find them. Any pics on how you got by with a standard one, or where to get a custom one would be great thanks

$1140 delivered. ------------------------------------------------------------ ca18gem - $840 CA18 High mount T25 flange internal gate (suit gt2860rs) bigadz - $840 SR20DET lowmount manifold gibbau Zac Gibson - $100 Split pulse RB25 high mount T4 flange Pickup Tamimego - $840 SR20 Low mount internal gate t28 flange choku_dori - $1880 Split pulse RB25 in r32, highmount external 44mm gate t3 flange (suit 3540/3037) Split pulse SR20 s14a highmount external 44mm gate t28 flange (suit HKS 2835) blockasR32 - $200 Split pulse RB26/30 High mount external 50mm gate NYTSKY (david hennessy) - $1370 Sorted out with kyal R34NUR - $1350 RB26 Twin turbo low mount stock flange

Make: Nissan R32 Skyline Four Door GTS-T Motor: RB20DET Engine mods: Garret 2871R turbo, plazmaman cooler pipes, hybrid fmic, plazmaman plenum, splitfire coils, RB26DETT Apexi Power FC D-Jetro retro fitted, custom coilpack cover, polished rockers, GTR 444cc injectors, GTR Fuel pump, GTR Plastic 60L Fuel tank, makes 300 RWHP Suspension: Cusco castor rods, whiteline swaybars, cuscu camber arms, adjustable rear control arms, hicas lock bar, D-project traction rods, whiteline front camber bushes, Tein HA Coilovers Driveline: Exedy cushion button clutch, minispool diff Brakes: RDA slotted rotors front and rear, ADR approved stainless braid brake lines, ABS, EBC Green stuff pads all round Interiour: No rips tears in seats, or dash. Kenwood double din 7" DVD Player, JVC 6x9s, JVC 6's, amp, kicker sub, Pulse battery relocated to boot in alluminium box Just purchased another car and need to pay off some debt. Need a fast sale of $9500 with RWC or $9000 without!!! Will deliver anywhere in aus. If you have any questions just call me on 0448233105, Leon.

Okay deposits have been made.. There is still a few people i havent sorted, i will send PMs, just not sure on what wastegate and turbo etc you running.. thanks fellas. update soon. Hopefully all the manifolds will be at your door step within 2 weeks ca18gem - $100 CA18 High mount T25 flange internal gate (suit gt2860rs) bigadz - $840 SR20DET lowmount manifold gibbau Zac Gibson - $100 Split pulse RB25 high mount T4 flange Pickup Tamimego - $100 SR20 Low mount internal gate t28 flange choku_dori - $1880 Split pulse RB25 in r32, highmount external 44mm gate t3 flange (suit 3540/3037) Split pulse SR20 s14a highmount external 44mm gate t28 flange (suit HKS 2835) blockasR32 - waiting Split pulse RB26/30 High mount external 50mm gate NYTSKY (david hennessy) - $1370 Sorted out with kyal R34NUR - $1350 Still sorting details

recieved a few deposits and the full payment from you nytsky. I will be paying 6boost tomoro for their manifolds... those who are paying next week may have to wait until after the new year for their manfiold. thanks guys, ill update properly tomoro

Could possible still use standard dump just might need custom front pipe. But may also need to modify cooler hoses and intake pipe. Maximum $500 from my local mechanic... dont know about yours though

Thanks Kyle for that info. Again here is the bank details.... Ill send out a group PM to everyone who was already put down a deposit and another one to the fellows who are waiting on answers, just to let you know that kyle is now available to help, as im just a customer not a manifold expert If interested full payment is needed by FRIDAY so i can get the moneys off to kyle to get there babies ordered National Australia Bank Acc Name: Leon Minic BSB: 084-792 Acc Number 79-164-3300

PM sent NYTSKY. Friday is the cut off people. Maybe monday if your lucky

Hey, Just wondering what size external gate I will need. I currently have a RB20DET. I am buying a 6boost high mount external gate manifold, and am going to run a 3076 with 0.82 rear housing. The rb20det is just a motor for now, i am going to start to build a rb30det. but in the mean time i want some more power on the 20 and since all these mods are transferable ill do them to the 20 just for shits and giggles. I will probably run 16-18psi on the rb20, and around 18-22psi on the rb30. I just wanna know what size wastegate i will need. I have been told anywhere from 38mm-50mm. Also what is the adjustment range, like if i have a 18psi spring can i run anywhere from 16 to 22? I dont get how they work and i have googled and cant find any info