MR FLWLSS

Turbo flange size?

Hey guys this is sold sold sold

Ok guys I just need this gone now price drop $900 cash price is firm SMS or ring me on 0433750636

i also forgot to mention this comes complete and i will not be splitting the parts up

Hi Guys, Selling My Daily Driver, Vehicle was purchased as a runabout while my stagea was in for repair for the past 3 months. its just had 12 months rego put on it. my stagea is scheduled to be returned to me this weekend, once i have the stagea back the Charade needs to go. it does need a clutch and i will be supplying it with a new clutch kit, up to new owner to have it fitted. only damage that could be considered major is the rear bar has some paint missing where previous owner reversed into her letterbox. but other than that its a very nimble little runabout and its economical on fuel and its in great condition. 1994 Daihatsu Charade 12X,XXX kms 1.0L 3Cyl 5 Speed Custom Paint Rims 2" exhaust System MSD CDI ignition Stereo System 12 Months Rego Supplyed new clutch kit Asking $4000 neg Best Method of contact is on 0433750636 located in Sydney western suburbs kind regards Dave

Hi Guys, as topic says, i have a new haltech e11v2 it was bought for a project however the vehicle was sold and now i have this left. it was trial fitted to a mounting bracket and had its firmware updated but its never been used. comes with a new harness and new sensors in packaging, never used. I'm asking for $1200 however serious offers will be concidered best method of contact is my mobile 0433750636 item is located in western Sydney kind regards Dave

Sorry guys just ignore me I'm a dickhead, it has a traction control throttle body but no traction control in the housing.

Hey Guys, Been a long time since I posted, but anywho I just got myself a Manual C34 Stagea RS4S with the Neo RB25det, I was wondering if ther is a factory traction control switch that I can fit to disable the traction control on the engine like the R34 GTT. If any one knows if there is a factory switch for it that would be much appreciated also a photo of where it's normally located in the cabin and what it looks like would also be greatly appreciated so I can get one from Nissan or where ever. Cheers

Need to Move these $600 firm

hey guys cleaning out garage, need to make some room, quick sale, what doesnt get sold in 2 weeks goes on ebay , here is the list and prices: Holset HX40 Turbo. Low milage t3 flanged turbo from abandoned project. I dont know the specs, have to look them up. Includes all NEW annodised fittings ( $100 worth of speed flow fittings billet oil drain flange,bolts and -10 fitting, -4 oil feed to turbo, Gasgets,o'rings,sealing washers) $350 firm. (pick up only) Universal Shif light (NEW) $50 firm (pick up only) 2x Standard R33 Fuel Pressure regs $10 ea (pick up only) Autometer Cobalt Series Boost Gauge (Used) $30 (pick up only) Aux Injector Boss for Bosch Style Injector (Used) $10 Wide Band o2 sensor (VW/Bosch) with Harness Plug (Used) $50 firm (pick up only) All items located in sydneys western suburbs. if some one wants the lot they can buy everything for $400 firm (pick up only) For More Info PM me or call or text me on 0433750636

i stand corrected lol, sorry was half asleep. they are infact drift r's. thanks Dan and just a correction on the offset, they are 2.5cm (25mm) offset, sorry for the confusion guys. so the size is 19"diameter x 9-3/4" wide with a 25mm offset cheers

ok guys, hear is all the info i can give u guys. the tyres are 245/35 19. They are 19 inches in diameter x 9.3/4 inch (245mm) wide, i did some measurements on the wheels to try and work out the offset and got a meaurement of 2.5 mm approxamatly. but i cant be 100% sure if thats correct. they were on a r33 gtst and fitted perfect, no scrubbing or guard rolling required to fit. they have all centercaps, they have no gutter rash, and the only dammage is a couple of stone chips. other than that, they are in really good condition.

ok guys, i need to move these wheels, price drop to $650, no low ballers, or time wasters Cheers

any takers, resonable offers will be concidered

still for sale, anyone interested?

Roh Boost R wheels, 19inch, great condition, need tyres. Price is $800 o.n.o. any questions please call dave on 0433750636 cash only sale (i appoligise, bad picture)

Awsome. thanks alot

Dude dont jump to conclusions and dont stress. the simpleest answer is often the correct one. First thing is first: 1. check the PCV (Positive Crank Case Ventalation) Valve is in good woring order. quite common for them to get full of crap and jam up. if this is the case, soak it in carbie cleaner for about half an hour to an hour. 2. have any of the breather pipes been changed? if so check the one between the passengers side rocker cover and make sure the brass pill (restrictor) is still in it. 3. Have u performed the compression test right. and by right i mean did u remember to diconnect the crank angle sensor, and have the throttle wide open when doing the test. 4. Do you have a Blow off valve venting to atmosphere, if so as you back off the throttle, the air bypasses the airflow meter and is unmetered. the air flow meter takes into account the air that is dumped back into the inlet of the turbo on a standard set up, however if u vent to atmosphere the afm doesnt know that air isnt being pumped back into the system, causing a rich mixture and inturn smoke, stalling or rough idle on stopping..... so if you have changed the bov, change it back. 5. Bum fuel pressure reg. (regulator not functioning correctly) and etc, etc, perform process of illimination, and if your unsure or dont know what u are doing take it to a mechanic that does. as a mechanic thats the best advice i can give without seeing, hearing, or driving the car. hope this is of some help.

I need the factory specs. the specs on those sites are for use with there fasteners. thanks for the help anyway.

we always cable tie them on the dyno. cable tie's are the easyest and quickest way of doing it.

Hey guys, Im in desperate need of the Tightening torques and tightening sequences for the Head, Mains & Rods (Big Ends) For a RB26Dett. if any one has them, or can scan the pages from a workshop manual and send them to me that would be great. and any other relevent information in regards to tightening torques or rebuilding for the RB26DETT that would be great. and it would be prefered if it was in english. i cant read japanese very well. Cheers

Jet Ski Retrenched From sale. Car still for sale @ 13,000 Neg

Sorry dude. im confused. if its a seadoo, how can it be jap spec, Seadoo is Canadian and is made in Canada and the Rotax engine they use is Austrian and is Made in Austria By BRP. BRP own SeaDoo, SkiDoo, Rotax, Can-Am and are the developers of the CAN-AM Spyder....... Not too sound like a prick but there is no such thing as a Jap Spec SEA-DOO, SKIDOO or any other BRP Product. Maybe it was imported from japan. How ever i own the Larger SEA-DOO SPX of the same era and i can say that they absolutely haul ass. There F%#@ing Awsome, You cant beat a screaming 2-Stroke. good luck with the sale mate.

sorry guys i also forgot to mention that the wheels pictured also come with the car but are not fitted as they need tyres

here are some pics, the pics of the car are not recent, will post more current pics soon but the only thing different is the rims were swaped for the factory nissan alloys. the reason for this is as the car is my daily driver the tyres are cheaper for the factory alloys.