R.3.2.G.T.R

doesn't catch very well with blade due to curvature, will try nail polish remover tmrw

mothers clay bar (yellow), I got lazy and hadn't touched it till few months later, I guess it bonded to the glass it more

my carelessness

Tried the normal clay bar, I think will need the aggressive red one

Any tips on removing clear over-spray that has landed on front windscreen, in form of minute dots So far tried autoglm glass polish and grease/tar remover (pre- paint prep)

Who is doing the work?

roughly how much for paint job?

damn didnt realilse u were running z22, car was on rails thru the corners, i was being ambitious with the size on offer :-)

what width rims is needed for this size?

first up, already seen the excellent how to guide by jdmconcept on how to spot fake, however that was posted quite a few years back and the fake ones have copied some of the tell tale signs already like the no. of cross stitches anyways, i have seen some on sau sell recently as genuine which also appears to be fake perhaps unbeknown to the seller, in any case, there are still couple of signs that are yet to be copied * carbon on the top centre bit of locking mechanism is dry carbon, not gloss stickered carbon, whole mechanism should be quite heavy * rear of the locking mechanism does not have a centre hole nor uses normal screws, use torx screws (i have seen some without the centre hole but still using normal screws) * accrediation tag ribbon underneath is white (ie. painted green on top), whereas genuine ribbon is green on both sides * main large "Takata" sign does not have corporation on it and should be double stitched on both left / right sides * if you lucky to get the black box, it should have a sticker dot on which series is inside, not printed dot, also barcode sticker on the left of this info anyway, on to the pics, found of genuine ones while researching this for the last hour

same here but with better tyres and brakes this time

I would have beaten Tez by few hours with sms and pm , but for all we know Fatz is there already with the trailer

nice pics, even better when my car is one of them

how many boys ran semi's? be keen to know how the street tyres ones fared

yeah I spoke to him again after he came from medical, sore neck and was gutted about the car

awesome day, car survived few 8k shifts, lots of nice cars, great meeting lots of you guys

I'm betting it's your CAS, had something similar happen, signal seen by ecu was all over the place, replaced and started first time

bought the mounting bracket from kudos motorsport (tnx Andrew for sending it express) and installed with bride stradia low max seats, clears fine for my normal seating position

Black and white r34 gtt parked opposite each other at Winston hills mall

got cams approved one from big w tonight $35

on r32, can someone measure height once fully installed with extinguisher in place?

pics of the install

Pm sent

Interested in the air guide, pics n price when possible

Pics of RB26DETT oil air breathers and joins - $20