Jump to content
SAU Community

R.3.2.G.T.R

Members
 View Profile  See their activity

  • Posts

    2,592

  • Joined

  • Last visited

  • Days Won

    1

  • Feedback

    100%

 Content Type 

Everything posted by R.3.2.G.T.R

  1. R.3.2.G.T.R
    ^^ yup same one i bought few days ago for my 32R.. let me know how u go with tuning it.. trent @ status tuning in one of the post highly recommended the unit and found unit to be as good to highly recommended blitz units in back to back testing.. there is also the faq/installation of the unit by one of the import shops on the web
  2. R.3.2.G.T.R
    im looking at this mod before getting my 32R tuned, it will be running tomei in-tank pump so not entirely sure if mod is required.. still thinking of earthing pump to chasis at the very least.. currently stock pump is running on full/high voltage as i had earthed the faulty fpcm i have 0 gauge running into boot with distributor block from which im thinking of running power to pump
  3. R.3.2.G.T.R
    can anyone confirm but i read sometime ago, to use the highest flowing injector on the leanest running cylinder?? is that cyl 1 or 6?? anyone know sard 700 latency??
  4. R.3.2.G.T.R
    sorry meant catch can
  5. R.3.2.G.T.R
    im after both upper c-pillar trims, need em in excellent condition, without cracks etc
  6. R.3.2.G.T.R
    are u selling ur oil cooler??
  7. R.3.2.G.T.R
    interested.. are these low or high impedence (suitable for GTR) and what power at the wheel will it support??
  8. R.3.2.G.T.R
    hi all, im after 600-700cc top feed injectors to suit GTR, new/used both considered
  9. R.3.2.G.T.R
    i was also interested in the -9 prior to picking up my gt-ss recently, upon enquiry to kudos motorsport (sponsor), they advised -9 were not a direct fit.. not sure what garrett website states.. http://www.skylinesaustralia.com/forums/Ga...rs-t229588.html
  10. R.3.2.G.T.R
    i have adjustable noltec uppers, setting camber to neg 1.5 and toe to 1.5-2mm each side on the front, is this a std/recommended setting for 32GTR?? any toe for rear?? also roughly how much are alignment for 4wd cars??
  11. R.3.2.G.T.R
    buy garrett instead of jap branded turbo kit as its cheaper and around ur budget mark and don't buy 2nd hand unless u desperate to stick to $2k garrett 2860-7 is very close to stock response but increased power limit and can be had from sau sponsor for around $2600 along with gasket kits etc.. pretty much bolt-on to existing dumps
  12. R.3.2.G.T.R
    braided line still avail for 32R??
  13. R.3.2.G.T.R
    pm sent
  14. R.3.2.G.T.R
    @alex - how much did it cost to do your own roughly??
  15. R.3.2.G.T.R
    im down for one..
  16. R.3.2.G.T.R
    sold to me thanks reni
  17. R.3.2.G.T.R
    am i correct in assuming tomei, mines and stock r33 gtr dumps will bolt onto gt-ss without mods as they don't have divider flanges??
  18. R.3.2.G.T.R
    ^^ how was the fit for the braided lines as im looking at getting them as well
  19. R.3.2.G.T.R
    plz add me to next batch and advice when payment is required
  20. R.3.2.G.T.R
    quote for early r32GTR front and rear std slotted rotors delivered to 3350
  21. R.3.2.G.T.R
    will it suit r32 gtr (push) and wot kw will it handle?
  22. R.3.2.G.T.R
    pm sent
  23. R.3.2.G.T.R
    sorry if i missed in earlier post, is grex oil filter relocator still avail?
  24. R.3.2.G.T.R
    interested in pfc pro and arc catch can?? where does the catch can sit, how many in/outlets?
  25. R.3.2.G.T.R
    hate to see a nice 32R banged up like that, good luck with upcoming project, are u selling ur custom catch can or using it, might be interested
×
×
  • Create New...