Jump to content
SAU Community

r33cruiser

Members
  • Posts

    2,291
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by r33cruiser

  1. DIY unfortunately. I guess I'm lucky in that I got everything I wanted done before the shop shut. Why do you want to contact him the WOR57?
  2. Matty Spry.. BTW, What ecu?
  3. What condition are your plugs in? Have you actually pulled them out and checked them yet?
  4. Show queen to track hack. What was the inspiration for the change Andrew?
  5. Define the flutter you want? I had my ssq tightened as far as it would go. When it opened it would make a chattering sound. If u want dose....just take the vac line off the bov and block it.
  6. I used that wrap cloth. Soak it in water then wrapped the dump pipe. It's worked, the dump pipe has no signs of corrosion. Happy days
  7. The norm seems to be around the 35psi mark at idle. Mine sits at 33-34psi
  8. Thought I would give you guys an update. Finally got some time to go over it today. Due to my r34 cams I have had to use an r34 cas. I took off the plastic cover of the cas exposing the bronze disc inside. The car started and revved freely. It appears that it was full of dust and that was restricting it.....well maybe. Its revving fine now, it idles etc so lets hope it stays that way
  9. Afm has been checked by my mechanic, voltage and wiring is fine. Will definitely go over my cooler piping again. I am only running 12psi-still on run in tune so I dont think a join has popped off. I will investigate my plumbing further tomorrow.
  10. Hey guys noticed this after a drive. If i came to a stop and was idling for a few mins the car would gently die. I was able to restart it straight away no worries. Now it wont rev past 2000rpm, when you add more throttle it just pops as if it only had 2 running cylinders. Eventually it will stall after idling for 5-10min. Its a built engine with cams, gt35r, Pfc and all accompanying mods. As of now it is undriveable and is just sitting in the garage Ideas? I am led to believe that this is a C.A.S issue?
  11. Woot! Bout time, this place is dead. Was on sutherland street in buderim for work. Was inside a house and heard something loud drive past with a loud whine and thought to myself "I bet anything thats an RB". It sounded amazing, and as if it had a to4z/dogbox on it. Crazy whine comming from it. Quickly went outside to sneak a peak, and out the corner of my eye spotted a WHITE R32 SKYLINE. Fairly sure it was a 4door. If he's on here , sounded nice brother
  12. Only had 1 problem after a few track days. The wiring from the o2 sensor was slightly melted
  13. What condition are you plugs in? I had the same problem, took it to my mechanic. He pulled out the plugs. They were in terrible condition. The ceramic on number 1 and 2 cylinder plugs were actually SHATTERED from the heat. Replaced the plugs and the problem went away
  14. Only problem I have with my PFC is "power fc desease" or......Airflow Reversion.....DUN....DUN....DUNNNNNN If you have a large high mount turbo, be ready for it
  15. Absolutely no difference after I added a fmic. I can't talk about figures as I didn't get a before and after tune. But I didnt notice any change
  16. You have to take those figures with a grain of salt. The vvti single turbo engine is NOT more powerful than an rb25det. toyota soarer ; 1jz vvti stock single turbo with BPU's at 12psi = 239rwhp r33 skyline ; rb25det stock single turbo with BPU's at 10psi = 256rwhp. Both vehicles were on the same dyno. 20min apart.
  17. Garage = Garage floor Garage floor + hose = clean If I spill oil its only a little bit, so I just keep a couple of rags handy
  18. I guess I like it because it has similar styling to the re'venton. And that car was freaking SEXY!!
  19. BAAAAD IDEA Thats like saying I will buy a 50 footer incase it floods again Wait UNTIL your motor goes pop THEN forge it if you have fully researched the costs and make an INFORMED decision to forge it Why waste your moneys..
  20. PORN!!!!! I hope they bring back a manual version lambo one day. Some of us dont care if you gain .0003sec from a flappy paddle gearbox.
  21. Yes you can seat 5, but its not comfortable. Not sure if its legal or safe tho
  22. Lumpy idle and low down torque lover signing in (260's ) IF you are deadset on getting cams, I wouldn't want to go further than drop in 256's.
  23. Ouch that suck negg I guess you just proved a point to 180JDM haha. Anyone see the smash yesterday on aerodrome road opposite hungry jacks at around 11:00? I drove past and saw a hotted up red holden ute, an old early 90's white integra with chromies and cannon and a falcon. I dare say they were "hoons" Looks like they were hooning along, the integra smacked into the falcon, and the ute smacked into the integra.
  24. He doesn't hate US mmmbop..............he just hates YOU
×
×
  • Create New...