B-Man

Hi - It's a bit hard to say what I will pay - because it depends on the what people have to offer. I think I have posted a reasonable accurate description of what I want and why I want them. Again for the record what I want is: A set of two (2) - Rims for drag use Any condition as long as they are not buckled and can be balanced. (ie Not new rims - scratched is Ok - I don't care what they look like - ie they can be 3,4,5 spoke, mesh, steel, dish - whatever. at least 8" wide - prefer 9" 16" or 17" between 30-40 offset 114.5 x 5 PCD (skyline, ford, mazda PCD) Reasobably cheap Prefer Sydney Pickup Obviously less then $350 as I have stated this. J - the Technocast (I don't know what this is) ones sound OK - if you could get details (size, etc and perhaps pics) that would be great. I don't need 4 so I amy be able to sell the other 2 Thanks

Need at least 8" - Fords, Nissan, Mazdas should all fit - Even steel rims if they are wide enough 16" would be fine too !@

Thanks guys - I only need 2 wheels - $350 is more than I want to pay for 2 drag wheels ta

Don't care what they look like - as long as they are buckle free and can be balanced. Don't are if they have rubber or not as I will be putting MT ET streets on them. Must be fairly cheap !

I want to know more about this !

Just Jap - Bride Style race seats - pair Black Universal Rails Reclinable Set of 2 Pickup on Northern Beaches - Sydney RRP $499 per pair Offers over $300

Nah - Boost will be low and cool - flow will be lots - this be good for rotors - esp apex seals - Thinking of going 1.56 housing on the rear for even more of a good time

Oh hell yeah - it's built alright - did you see the rotor ? Nice machining around the lip - means good revs - bring it !

10K is a little over the top yeah. Just going on what the engine builders are telling me -

Around the 9,000-10,000 RPM mark Found a bloke on AusRotary with a mad 20B Cosmo - he's ripping his engine out and putting it in a tube drag car - his tranny is for sale - it's an MV modded one with a 4200 RPM stally (maybe a bit to high for me as my boost will be on by 3000 RPM easy )

If you do a search you should find something - I remember posting the wiring stuff up after I had troubles, but then worked it out !

Yes, I've heard about Baron and his trannie fetish !

Ha ha - Yeah , Yeah - that quote was before I decided to go the whole hog with the engine rebuild. (ie just the go fast bits bolted on) I'm used to it ! Good work takes time ! My cars seem to like workshops :) Not long to go now ! Adrian - where's the best place to get the Auto tricked ? It's a Jatco ! Same as the 300ZX box - Will go for manualised auto with 3000 RPM stally - Do you reckon I should go a transbrake as well ????

Think I will have to do something about the "Sequential Twin Turbo" on the plenum - Should change it to - "Big Fu(k Off HKS turbo"

Pics from today !

Pics from today !

Nearly there - Motor has been rebuilt to handle the extra grunt !

Nearly there now - maybe a week to go. ! yay Engine is completely rebuilt - fully dowled - and back in the car Injectors are in Fuel pump is in Turbo manifold and pipe work is currently being manufactured I'm getting excited again !

My car will be ready by then (hopefully well before then) - So I'DD the $$ ASAP !

Humpy Bumpy

Car also come with: 2 rear diffs - one locked (fitted) the other standard (not fitted) 2 Near New Batteries 2 Radiators - one standard one single core. Lots of other bits too - can't think of them all Car is also on e-bay Click here for pics http://tinyurl.com/2qynsx Also - if car sells via SAU - I will donate $150 to the running of the Forums

Sydney - Northern Beaches.. Car is also on e-bay Click here for pics http://tinyurl.com/2qynsx

For Sale is my Project - KE 1989 TX3 4WD Turbo Laser. Car is not registered. This car is an ex rally / race car. It has welded & strengthened seams. Mounts for roll cage. etc - Fully kitted out for rally / race. Also has front and rear strut braces. Mounts for race harness and comes with harness kit (not new, not installed). This car handles like a cart ! I have started it's transformation but need completion now as I am going O/S/ 1.6L turbo engine has just had new Excedy 3 puck racing clutch fitted. Engine runs well and is in car - but need gearbox links, throttle cables and wiring up. The car comes with a old Haltech Fuel only ECU - but would recommend replacing with a newer Fuel & Ignition ECU as the Haltech is no longer supported and getting the tuning software has proved to be difficult. Engine runs perfect and compression is a uniform 160 accross all cylinders. A variety of Pod filters comes with the package. The engine has bigger injectors - Custom Dump and Big straight thru exhaust (no cat) The turbo has been stripped, cleaned and polished. No shaft play at all - Also comes with a spare turbo. Suspension has been replaced by me as it had a bent front strut. Full race spec K-Sport inverted coil overs have been fitted to the front - I have the rear coil overs but haven't fitted them. The suspension is brand new and cost me $2,500. Old suspension comes with the package. I have replaced all suspension rubbers at the front along with tie rod ends and control arms with new items - New sway bar links bushes. The front sway bar is a massive 30mm job and the rear suspension has been worked for racing. Engine mounts are all good - had to replace one with a new one. Crossmember rubber have been replaced with new one. Basically, when I took the engine out - if anything was worn or broken, I replaced with new items. Front and rear discs have been replaced by new DBA slotted rotors - Fronts are fitted - Rears are not - but come with the package. Brake pads are good - comes with a new set of rear pads. Brake system has fully braided lines and has brake bias control (front / rear). Handbrake is Hydrolic. Front wheel bearings have been replaced & repacked with new ones. All CV joints have been inspected and re-packed. Car has racing seats installed which are a bit old - but I have new seats (not installed) available. (extra $300) Wheels are polished Simmons all around - Tyres are good condition. Car has been re-sprayed a few times which you can notice - Engine bay has been cleaned and re-sprayed. I have spent over $5.5K on the car so far - and it won't take much to get into race condition. Car will need to be towed as engine not completely hooked up and car is not registered. I was thinking of stripping and selling the individual bits as I would get a lot more $$ this way- but basically I can't be stuffed - so if you want a bargain - Give us a call. Price - Offers over $2,500 Brendan - 0402 030 038

That's an easy one. Got rid of the missus......

Nah mate - already have 4WD This one I am keeping for a loooooong time