bigslick

R32? Or R33/34? The stock 32 GTR has the redline at 7500 and 33/34 at 8000.

had a look through posts since feb 13 and couldn't see anything stating specific details such as these.

This is what I was hoping for. autoblog

If anything it will be worse, because now it will be sucking in hot underbonnet air. You may notice a slight improvement if you fit a performance filter, but not always.

I feel your pain having a car off the road for so long. Nice setup tho Using 1.15bar I would guess it came up just shy of 300... 295rwkw.

Astroboy- although I cant' say I miss it... cos I've got the original 10 disc set. Pringles Cheez-ums! They were the best!!

Try this one Performancelub Or some Sprints may be able to get it.

Hmmmm... I think I might have been a bit off the mark. Maybe it was a 13 flat on his best run. That sounds right. It was a while ago!

Is it GTST? If it's the same as the GTR there's a little panel next to the handbrake which you should be able to pop out and see an adjusting screw/bolt in there. If you can't get to it through there you'll have to take the centre console off. Just make sure that when you've adjusted it you jack up the back and check that the rear wheels still turn easily.

I do know someone who had an R33 GTST with 210rwkw and ran a best of 12.0 with just a little wheelspin. Then, on what turned out to be his last run of the night, he hooked up really well off the line only to break a non-genuine uni joint!

I've already got mine too. Yeah..."Tuned by Sydney's infamous Croydon Racing Developments..." I like the cover car - not sure about the wheels though.

Here you go, this is the one you want. Gaiter boots I got these and they are very good quality. Just make sure you specify exactly what car it's for and what colour leather and if you want the logos or not. EDIT: Damn, just beat me GT-R logos are ok, if I got them again I'd just get the logo on the handbrake.

what about some Motul 8100 X-cess or 8100 ester e-tech?

As above. And does anyone have any pics of the series 2?

Where To Buy Motul 4100 10w 40? Ans: Don't Buy Motul 4100 10w 40 It's only a semi-synthetic

It didn't actually cost that much to put together. The timber I found on a building site, small pieces of mdf was what I had left over from building my poker table (that's another story) and the chair was only about 30 bucks from Ikea. Just took a hacksaw to the legs And it's surprisingly comfortable. Been doing some enduros lately and no complaints.

stretched tyres = look like a knob

That's right. It's easy to stereotype. My implication that all older drivers crash because of being disorientated is just as silly as the claims that all young import drivers are reckless.

That's rubbish. Exactly the opposite has been proven. Can't remember exactly where or when I saw it but I remember the police saying it had a positive effect and drivers at the track said that they would feel less inclined to race on the streets. This narrow-minded group of certain ones of "the older generations" needs to show some respect and stop stereotyping every young import driver as a hoon. Just remind them that in 20 years they'll all be crashing into peoples front yards because of being disorientated and hitting the accelerator instead of the brake.

Those rims are atrocious. A GT-R should not be pimped... it's sacrilege.

Originally "Rice" would have reffered to all jap cars, but i think it has evolved to refer specifically to what is shown on anti-rice.com. What they need is one of these. Rice citation

True. That would put the geared top speed at about 210kph. Not that I doubt the truthfulness of your experience Adam.

Need to do the clutch in my R33 gtr soon. Anyone had any experience with this Xtreme clutch? It's 1260kg clamp load (approx 50% over standard), and a dampened hub with cushioned ceramic facings. At the moment I might be making around 230kw atw, but need it to handle 330kw atw. Ballpark price i've seen at the moment is around $1100 for the kit.

Thought I'd add these two videos seeing as this is what inspired me to build mine. The guy says he modelled it off an S2000 dash. Pretty cool

Hmmm... I'm sure a VR38TT would fit ......"What do you mean official? There's nothing wrong here, it's still a V6!"