jonny8ball

Search function doesn't work on iPhone app. Have tried searching for everything and anything and the search function brings up 0 every time [emoji20]

Id really like one myself. Didn't know you guys had them! A dropbox link would be awesome [emoji41]

Thanks Duncan,that's exactly what I did yesterday. Worked a treat.

Thanks guys for the help I've got it all sorted out now.

Its come time to flush out the heater core and to do this I need to back flush it, tho I can't seem to find out which is the outlet pipe, is it the top or bottom pipe in the engine bay. Anyone know?

Pm sent mate thanks!

Thanks so much guys! Has anyone translated the pin out yet?

Thanks for a fast reply buddy! My Stagea is a 97 so think its just the ets

Hi guys I'm really in need for the pin outs on a series 1 4wd stagea attesa ecu. Ive searched everywhere including this forum and cant seem to find a pic or any info. Can anyone help? Thanks in advance!

Yea no difference just slightly easier to go by the passenger side as its closer to the cig lighter. Cool man will let you know if I need anything. Thanks buddy

Push the height adjust buttons in and while they are compressed pull the cover off that's around it. Behind that covers is a nut that you need to remove (think its a 13 socket) then the seat belt will be able to drop down and your can pop off the a pillar. Tho you don't need to remove the pillar to wire up the mirror. I fitted mine today without removing the pillar. I just removed the grab handle and popped to clips on the a pillar and fed the wire thru and down to the Ecu then removed the glovebox and tracked the cable to the cig lighter.

A pillar comes off by undoing the seat belt then the grab handle then it just pops off and move it backwards so the clip can pull away from the dash.

I found a series 2 one last month and will be fitting it hopefully on Tuesday. I'll see if I can find out what the other two wires are for

Just get an aftermarket ecu and leave it into a pro to install and tune and don't worry about tps. There are loads of good people for this in the UK.

Most ecu will need a little bit of rewiring but best one to get in the UK for a manual Stagea is a link G4. You can also get rid of the maf while your at it. Have a G4 myself and can't fault it. I'm sure once you have an ecu with a proper tune you will have no more problems!