raps86

Hi i was wondering if people know where i could buy this product as the only place that i have found is from access autoworks but im trying to see if there are other places that would sell it aswell. This is the product that im after http://www.accessauto.com.au/Items/ap-415-...or%20Power%20FC and im not after the datalogit. Thanks in advance.

another thing is that they cant fail you but the cops can still defect you if it is to low but you can get a pink slip. Did they nock it back for anything else or just the ride height. If they did let me know wat else and ill check the book on whether it is a fail or not.

Because your in new south wales i have the examiners handbook right beside me as i done the course not long age and there is nothing in the book to say they can fail you on ride height. if you dont use the place for working on your car only geting the rego done go back to them and say" SHOW WHERE IN THE RULES FOR AIS WHERE IT SAY ABOUT RIDE HEIGHT" and if they cant then they cant fail it for rego. hope this helps you.

Nice vid andrew. what are those project d days like? Im thinking about doing a day with a few mates. And ferd's car is an animal

I have a set of old spitfires htat i pulled out of the car about 2 months ago if your interested

Congrats on the new bub stu.

are there any left as ill take a set if there is. Ive still got your last pm with payment details if there are any left. Thanks

Are they for the throttle sensors that mount just behind the top hose as i have three plugs there in those colours but cant remember how many wires are in them. The only other conector on that harness is about inline with the third runner on the manifold but it is onoly a black one and just connects the 2 harnesses the run along the manifold hope this helps you. My car is a manual

Not sure if there are others but try fulcrum suspension they are a tein authorised place.

if you have romoved the tie rod end off the rack end before removing it from the hub it will be alot easier to undo the nut that locks it. When undoing it count how many turns it takes till its off the rack end. With the boot undo both of the clips or cable ties on either end of the boot and pull it towards the outside of the vehicle over the rack end. Then you will see where the rack end screws into the rack and there will be a nut type part that is on the end of the rack end where you undo it. Check for a tag behind it to help hold it. When installing the new rack end make sure you use loctite where it screws into the rack. Hope this helps you

I had a quick look in google and it looks like the tyres are made by dunlop so try a few places that sell dunlop and see if they can get them.

If the headlights are out of the car pull the covers off and have a look at where the bulb go in on both of the headlights look at the one with d2r on it then the other ona with the h1 and there might be a plate in the h1 headlight that can pop out and a d2r bulb will fit. Have a look in the tutorial and you will see the part im on about. Get the d2r bulbs. I just fitted 8000k bulbs to my car ill take a photo when i get a chance and post it up.

recived my order today. Thanks for organising this now ive got sumthing to do on my lunch break 2morrow

i would at least drain the fuel out and replace the fuel filter and pull the glow plugs out and give the motor a few hits with the starter to see if anything comes out. Hopefully there wasnt any damaged done to the motor how much fuel was put in the tank

I just put 18x8 +37 on my gtt with 235/40 and 245/40 on them an they sit well in the guards

pm sent regarding relay wiring

i havent fitted the fuel pump yet as i only got it on friday but the way im gona run mine is through a relay. The easiest way that im doin it is mount the relay in the boot sumwhere then run a fused wire straight from the battery to the relay through the gromet behind the right hand front wheel arch with the fuse as close to the battery as possible. Then run another wire from an igniion source that only turns on when the key is in the on position to the switch terminal on the relay. Then run an earth from the relay and the last wire from the relay to the fuel pump. Hope this helps If you need more help with the wire feed send me a pm and ill try draw a pic for you and pm it to you to hopefully help. But check the voltage first at the pump with a multimetre.

Also another thing is if you got the same walbro pump that i got rated to 600hp you have to make sure you are getting 12 volts to the pump not the volts that they might have wich mite mean running power straight from the battery on a relay.

Yeah they have made big improvements on this seson over last year. I would hate to be on that jetski.

Congrats on the new addition.

as the topic says im chasing a holden 186 block for my friends gemini super sedan. Preferably a 186s block if any1 know of one sumwhere. If you can pm me that would be great. Thanks

interested aswell if there is any left ill have a look 2morrow if the r34 use a t10 bulb or t5

As said above seing as your from amberely and gona be there for 3 months im guesing either army or air force for basic training. There is a few cars down there and as said befor they are strict on defects there. they defected me and i was only driving through the town.

done a bit of research and found out that a normal hb3 will fit in my car instead of the HIR1 (misspelt it before). Can i get a price on 3 kits all delivered 2gether. Im after a H1 kit in 6000k, D2R for my lowbeam in 8000k and hb3(9005?) for my high beam in 6000k delivered to Bathurst 2795 Thanks. Ps this is a photo of the bulb that is in my car.

On sunday cause i have to drive passed the mount wilson turn off on the way 2 pick nick up ill see wat the weather is doing on my way passed and let every1 know when i get down there or when i get coverage.