da spike

Need this stuff gone guys

Bought JJR coilpacks for a R33 S2 and they were never right but now are misfirring badly at high boost and guess what? It has been about 15 months after purchase so now im fooked... Should I try to gap the plugs to 0.7mm? I currently have BCPR7ES gapped to 0.8mm and its missfiring under high boost. These coilpacks are pieces of shit seriously!

all prices are neg, throw me some offers

Guys, I also have R33 S2 370CC Injectors for sale $100. Forgot to add that the Walbro pump is only 7500kms old

Up for sale are a few items which came off my R33 S2 when it had 90k kms on the clock. R33 S2 Fuel Pump - $80 Walbro 255LPH fuel pump - $100 R33 S2 Turbo with very minimal shaft play - $300 R33 S2 Turbo Blown, includes wastegate (just not pictured) - would suit a highflow - $50 R33 S2 springs and shocks - $130 Please pm me or call me on 0423 840 920, prices are neg, can post at buyers expense. All items are located close to Menai, NSW

Hi guys, I'm installing s15 injectors into my R33 S2 and noticed that the bottom plastic thing on some of the s15 injectors has some tabs broken and some are even missing, see a picture below: I have taken out my std injectors and the little things are in really good condition, see pic below: I just want to know whether this will cause any issues to the spray pattern of the injector if the little tabs on the plastic thing are broken? Any help would be appreciated. Thanks

Do you have any pics of them mate? Thanks

Hey people, I'm either looking for a set of 2 rims (16" or 17" preferably with no tyres) to put on the back for track purposes or a complete set of 4 rims R34/S15/350z rims also with or without tyres that are not too expensive. Let me know if you guys have anything. I'm in Sydney (Sutherland area) so please something around Sydney, I dont really want to pay for interstate postage. Thanks

Not to mention what a bitch its going to be to line up and screw in the waterlines to the hiflowed turbo... Are there any tricks to this because me and my mate spent hours trying to get the waterline bolts into his turbo.

It doesnt seem too hard, theres a DIY article about it on here, I dont think its a 5 minute job though lol. http://www.skylinesaustralia.com/forums/In...mp;hl=injectors

I already had a blown r34 turbo with OP6 rear so I just sent that in to get highflowed I was thinking about getting the powered up highflow but I'll be happy with 260rwkw and no need really, i'd rather a tad more response. Thanks for the replies guys looks like its getting trailered there.

Ok I have some questions: I have sourced the s15 injectors, z32 AFM and just waiting for the turbo to come in from Hypergear. Can I put in the s15 injectors for the time being and drive the car normally? I read in some posts that it should be ok but I just wanted to double check this. Also once I wire up the z32 AFM will I be able to drive the car to get it tuned or will it run like a dog? Thanks guys.

Sorry guys forgot to mention these are located in NSW Sydney, near Menai. I would prefer these to be picked up unless the buyer is willing to pay for postage.

For sale I have standadard R33 S2 springs and shocks (came off a 96 model series 2) for anyone that wants to go back to stock or a very confortable ride. Price: $100 ono

Thanks guys I have sourced the injectors

Ok, I'll get back to you if no one else has a complete 6 of them. Thanks mate. Anyone have 6 of them or another 2 or 4?

Toshi does wonders, my car was running like shit before his tune with heaps of flat spots but now its very smooth and revs out much quicker

I was freaking out about this light also but its fixed now after I have followed this procedure. Thanks heaps fellas

Havent really given my self a budget but all of this should come under 2.5k including a new fuel pump... but goddam i just got this walbro a few months back such a waste...

Hi, As the topic states I'm trying to achieve around 260rwkw and just need some advice on a couple of things. Car: R33 S2 Current: Std Turbo Std Injectors Std AFM Just Jap FMIC Apexi AVC-R Walbro 500hp internal fuel pump JJR Coils Toshi re-map Exedy Heady Duty Clutch (put in 3000kms ago) 3" dump and 3.5" catback with hi-flow cat Proposed: S15 480CC injectors Hypergear R34 OP6 hiflow turbo Z32 AFM Toshi re-map I read in a couple of posts that people had some issues with the Walbro fuel pump but this was mainly with a 450HP one. This one is 500HP and I'm just wondering whether anyone has any experience with this one? What about the FMIC and clutch? Any feedback would be appreciated. Thanks

I'm after 6 x S15 Injectors (480cc) to go into a R33 S2. Please let me know if anyone is selling any. Thanks

Ok cool I'll wait till I see the pics, does it have any cracks in the housing? Also just double checking that this is OP6 Rear Housing? Can you check how much freight will be to 2015?

Correct, I already have a blown 33 turbo

I've got a 34 smic in my garage somewhere. Let me know if your interested I'm in Sydney.

Sorry location is Sydney. Also if you have a R34 turbo that is on its way out or damaged please let me know as I will be getting this turbo rebuilt.