Raysboostin

got any specs?? Location??

20s and semis r gone. still got the 19s and brembos

20s now $1700ono

i need a spare set of roof racks to make a fibreglass mould for fill panels. anybody that can help me out pm me.

id just buy a vq35 and build that. u can get them cheap enough now days

rims reduced 20s $1900ono 19s $1500

no its sold. mods please delete

found out why mine dont fit. the guy sold me 350z calipers, but told me they were r34 gtr ones.

ive got a set of 350z brembo calipers if somebody in brissy wants to trail fit them on their m35.

found out that the brembo calipers are actually 350z calipers $500

just in case u missed it.

yes mines a ser 2 rs4s. the bolts arent a problem as i have the r34 bolts. i have the gtr discs as well. the problem is definately bolt spacing. when u put in 1 bolt the other hole is out by approx 10mm. i'll take a pic or two on the weekend.

i know everybody is talking about front upgrades but ive got questions about the rear upgrades. i tried doing rear 34 brembos but they dont fit the mounting bolt holes. the spacing of the bolt holes are different. are the r33 brembos the same as r34 or is the spacing the same as stags??

sorry i should of put that on. they r all 245/45/17

sorry i thought i put that in there. sunshine coast QLD

still got them and want em gone. $400firm

ive gotta clean up cos i dont have space for all this stuff and i could use the cash some used semi slick tyre (7 of them) i bought them off a mate of mine to use at the track, but i dont have the time to go to the track atm. theres at least 1 more track day in all of them, $150 for the lot. set of 20x8.5inch advanti desires 114.5x5 PCD with tyres (90% tread). not sure on offset but they fit perfect on a r33 gtst. will swap these for 17 or 18inch mags or buy them outright for $2100ono set of 19x8.5inch ROH strada 2 piece rims 120x5 PCD (suit commodore not skyline) with tyres (front 80% rear 50% tread). will swap these for 17 or 18inch mags or buy them outright for $1600ono a pair of R34 gtr gold colour rear brembo calipers. comes with pads, lines, clips and stuff. NO rotors. $600ono located north of brisbane. can post at your expense. pm me for further details

yes it was a front 1. rubber mallets and regular hammers didnt budge it. the solution came in the form of a 6lb dead blow hammer. even that took a few big swings. needless to say the rotor is a little deformed! lol glad i got some new 1s

strange. on my stag the brake front rotors (im using rda's though) sit too far inwards and they are hitting the back of the caliper. hmm, mines a ser2 maybe theres a small difference.

location??

just thought id keep all the brembo info together. i know theres not alot of guys out there that have put r34 brembos on stags. but just wondering if anybody has come across the problem of the discs sitting to far back and rubbing on the caliper???

what ratio???

have u sold the diff yet what ratio is it??

thanks guys. ive already tried some wd40 and hitting it from every angle i could get a swing at it, but no luck. unfortunately it doesnt have the 2 threaded holes to push the rotor off. the new 1s do, but sadly that wont help me till next time

howdy folks, i was goin to change my brake rotors today. so i pulled the wheel off and removed th caliper, but to my surprise the rotor wouldnt come off! i checked all around for a screw or bolt that was holding it on but couldnt find one. with all the other cars ive done the rotors usually just fall off when u take off the caliper. but this 1 is stuck tight. i tried levering on it with a jimmy bar and even hitting it with a hammer and it wont budge. any suggestions?? FYI: ser2 stagea, stock brakes