Jump to content
SAU Community

andy65b

Members
  • Posts

    2,153
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by andy65b

  1. That looks great! Drop it an inch and it will be damn near perfect. Cheers Andy
  2. I'll have a look on FAST tonight and see if there is a Filter on the transmission. I have been told the Trans fluid should be changed like the plugs, every 80 100'000 k's Cheers Andy
  3. I think MXFLY. Mine is Silver. Does he live around St Ives? I have seen one up that way. Cheers Andy
  4. mmmm . News to me. When and where did this happen? Cheers Andy
  5. boost on the ARX seems to be 14-15psi max and it goes back to about 12psi at 5000rpm. Looking forward to the Dyno shoot out and that new ECU tuning. I had the throttle position switch reset last week and the butterfly cleaned and the car is a little more responsive but a little thirstier. LOL if that is possible. Working on getting the Legalis Exhaust when I can. Cheers Andy
  6. shouldn't. They are the same shape as the original just solid in stead of hollow and the diameter may be thicker. Not sure of the diameter being used on V35. They are a great improvement to handling on the M35. Cheers Andy
  7. Spotted by a cop at a RBT on Friday. Grumpy cop giving RBT doing his job then another smiling cop sticks his head around the corner and says "this is one of those Nissan Volvo's". "nice looking car".
  8. Stop that glotting you bastard.
  9. I know, your not harassing. I checked with the developer today and I am afraid to say we are going to have to be a bit more patient. I wish I could give you all more positive news but I am just not able to alter the timing of this product. Thanks every one for your patience. I have been told he will be testing the product around the 9th Jan when he is on leave from his full time role. Cheers Andy
  10. was that a typo........you meant LAMBO , right!
  11. I would be driving a Liberty GT...
  12. Aren't we the baddies in Nissan's eye's? These terrible people who import cars (legally)... mind you, if I did not do this I would not be driving a Nissan. My experiences have been good but I see there stupid press releases about trying to catch all us nasty people..
  13. That is unlike Nissan to not help you.
  14. Yes, I used a piece of foam and glued it in the gap at the front. It is attached to a piece of L shaped extruded plastic that I cat groves in the end so it slides down the front edge of the air box and will not fall out. It sits just under the front composite cross member. I folded the rubber seal on the bonnet back so it would allow air to flow and not block it off. I used a piece of wire in the end of the rubber and then bent it so it stays to the side. (just in case I ever want to out it back to stock)
  15. Stephen, Have a look at this thread. http://www.skylinesaustralia.com/forums/M3...html&st=140, Cheers Andy
  16. I will post them later today. Cheers Andy
  17. Just make your own. Costs less than $20. Cheaper than buying it from Nissan and just as effective.
  18. 550 - 600.
  19. Idle is meant to be 750 in Neutral on the M35 but as I said mine is a bit high at the moment. Would definatley like it to be lower but there is no adjustment, it is all controlled by the computer. AS it has been rest it "may" be learning again. I have only done about 200km since it was done so I will see how it is in a week. It is certainly using more fuel with this idle and wants to drive on a bit much for my liking. If it does not come down over the next week I will be going back to see if we can sort it.
  20. Ok, update time. The car continued to stall under hard braking in 2nd & 1st gears. When I had the car serviced last week they said the idle was a bit low so they reset the Throttle position switch and cleaned out the butterfly. The car now revs a bit more on start up and settles at about 850rpm (which is about 100rpm higher than it should be). The car does not stall now under hard braking. So problem solved.
  21. Ahh, my bad. The SD slot will be to update maps. I guess you now need to see if you can find local maps for your system. I probably will not play music then. The Japanese TV tuners are not compatible with Aust frequencies. If you want to watch TV on OZ you will need an Aust standard tuner. The screen should go blank when you release the park brake. The override makes the screen work at all times. Being a frame less door. the windows are probably moving down a fraction when opened and going up a fraction when closed to get a good seal. Cheers Andy
  22. 1) The first picture looks like a Hard Disk Drive (HDD) probably for music. 2) Not sure what this is but on the lower left it looks like you have a controller for a on screen display. (I think that is what they are) 3) If you have the TV tuner I would guess this may be an override button. 4) No idea, but could it be related to the Bluetooth? Hope you have fun with it. Cheers Andy
  23. Looking good.
  24. Is the Syncro switch off? They don't like reversing with it on when turning. Cheers Andy
  25. Nice rims Rianto. Japan has some great products at great prices but getting them here. LOL. Double the cost. I am going to try and get my 19's from the states when I am ready and the exchange rate is a little more friendly. I am sure I can get some better freight rates from the US. Cheers Andy
×
×
  • Create New...