chestnut

Awesome video! Nice variety, wraps up the event well Where'd you get that Doev track without the vocals?

Well done, it's flush and just right, I wouldn't touch it any further haha. Do you think without the guard roll you'd only get 235's in there? Are you using rear upper control arms?

It's looking good mate. What are your plans in terms of oil control?

Damn how'd you get 265's in there, done any guard work?

Looks great, what size rims and tyres? Are you on B14's?

Yes, it's an R32 strut bar. Charles89 - I intentionally aligned it that way. From that picture if I rotate it clockwise only 1 edge will be in contact with the MBC (it's that much offset). So that one gold edge will be sitting against that diagonal bit, hope that makes sense. blind_elk - is yours a Neo? Forgot to mention that mine is a Neo, but you can probably see that from where the traction control module would be mounted.

I'm trying to fit a Nismo s-tune strut bar with brake stopper to my r32 gts4 rb25det. Firstly the brake stopper didn't line up so I've had to just rotate it for now, so it's misaligned but at least two edges are in contact with the master cylinder. When trying to connect the bar - at the driver's side - the bar won't line up in the hole properly so the bolt doesn't go in. This is because the bar goes directly over the intake pipe and fouls on the last black joining hose. It appears to be just millimetres too high. From what I've seen the rb20 plenum/intake is positioned closer to the firewall so it's not a problem. Anyone else come across this issue? Would washers or spacers under the plates be okay? Cheers.

Cheers for the easy sale mate, was good to meet you! +1 to the seller!

What an awesome first cruise with SAU Was great meeting you all, look forward to doing it again. Thanks again for setting it up Josh! Cheers, Haley

Is this a GTR only cruise? lol

Thanks Alex. I don't work Fridays so I've got no excuse, see you guys there!

Do you need to be a member to gain entrance? Or do you just buy a ticket at the gate?

Sounds good I'm in. Keen for my first SAU cruise I’m guessing you'll reschedule if it's raining?

What condition are the wheels in?

Bump Still looking every day on gumtree and eBay to no avail

My gearbox feels sticky and harsh when cold and only really feels good once it's really hot after being driven hard. The gearbox has been changed at some point in it's life, but I don't know if it's a gts-4 or gtr box, because the R32 gts-4 can take both right? When searching the oil guides for R32 GTR (because there's no gts-4), Penrite's guide says to use their '80W-90 gear oil', and Nulon says to use their 'SAE 80 Smooth Shift'. What should I do, try G70 before flushing it and changing to one of the above?

niZmO_Man, when you say you switched from HPR to SIN, do you mean 10 Tenths? Because SIN has been replaced with it correct? I'm new to Penrite's product line so I'm just trying to better understand it.

Mine is just a street car, so the Premium 0 would be preferable right? With Premium 5 and 10 being more for track work?

I was desperate to get a change done today so I just got the HPR 10. My oil reeked of fuel niZmO_Man my (local) Autobarn had 10 Tenths Premium but unfortunately not the Premium 0W-50 which is what Penrite was recommending for me. I’ll be getting some Racing 10 (10W-40) from Repco as per the suggestions above. Thanks guys!

Legend, thanks Mike! Keen for that 30% off Cheers Dan_J I'll keep Supercheap in mind too.

Penrite make it clear on their website that the '10 Tenths Racing 10 (10W-40)' is a synthetic mixed of group 4 and 5 which is great, but my local doesn't stock it! So I've got to settle for the HPR 10 (10W-50). I've tried searching this thread but can't find an answer as to what group Penrite HPR is. Anyone know?

Hi, I bought these generic coil packs new for my RB20DET off eBay. I used them for barely 1000kms before the engine was removed for a conversion. From memory these are compatible with RB25DET Series 1 also, along with R32 and R33 GTR's, but NOT later models i.e. R34's or Series 2 RB25's and Neo's. But please correct me if I'm wrong. $100 + postage. Cheers, Haley

Hi, After one of these in good condition, and of course it must have the brake master cylinder stopper built-in. Cheers, Haley

I've got a Neo aircon compressor, $100 + postage. I have hi-res pics if you wanted to see all the labels etc.

Saw a nice clean and low red R32 GTR passing me through North Bridge today, around 2pm. Gave a thumbs up and I think I got one back, couldn't really see because he was moving quickly. Also spotted a mini cruise last Saturday going through St Ives, yellow R33 GTST, white Stagea and white Evo 4 (i think). All very nice cars! We parted ways at the base of Mona Vale road.