DRGSTR

All all sweet now. Thanks for your help guys

OK i found this was unplugged.I plugged it in just now but i think ie flooded the bloody thing and cant start it. The 4wd light is still on in the dash but would i have to start the car to reset it?

Is that on the hub? so i have to just to find it and replace it?

OK i turn the ignition on and it flashes TWICE. Keeps flashing twice with a 5 sec cap in between or so. Any ideas what that means?

Ok well i can stop the front right wheel from spinning but not left. The torque gauge stays on zero the whole time (even when driving). Will grab those codes and post up today. thanks.

I got it on a hoist today and drove it through the gears. The front wheels do move a little bit. The front right i can stop it from spinning by putting my foot on it. I cant stop the front left.. But there cant be much power going to them cause i have NO traction at all. The torque gauge in dash stays at zero the whole time.. Sorry but your've lost me about the haltec computer. Ill check the error codes in the boot tomorrow and post them up. The 4wd was all working sweet but then stopped and i didnt touch the haltec or anything so i dont understand how it could be that?

Ok. Do you have a link to a website or something to tell me what all the codes are? Ill try and find the other nipple and bleed it. I did the one at the back of gearbox. Didnt realise there was one by the diff

Ok Gsensor is sweet, Topped up the reservior in the boot and bleed about 2 litres through it and the 4wd light is STILL on. Fuses are sweet This is my first non subaru car so im a complete noob. How do i check the comuter for errors? I have no idea where to look or anything. Its got a HELTEC computer system if that means anything. Thats on the passenger floor

I didnt bleed the system so ill do that and see if that makes a difference.

DRGSTR, The high octane skyline. The gts4 they brought and built over high octane 3 and 4 dvds.

OK ive topped up the reservoir in the boot, Checked the Gsensor under the console by handbreak and the 4wd light is still on and have no traction at all.. any other ideas?

My mate did a 10sec pass in mine standard gtr box. Most 10sec gtrs here in NZ are running factory gtr boxs. Most of them arnt street legal because of import laws.

5th to 4th crunching pretty common?

The one in the rear right in this photo? I checked it with the ignition on and its way below low. what do i top it up with? Thanks for your help

Hey. Just signed up! I own the High Octane built skyline. Just having some problems, Its rwd. Ive checked all the fuses and they seem fine. What could it be? Ive looked on the net and thought it could be the GSensor?? The 4wd light is on the dash too. any ideas?