Gtrgodzilla67

if oil was on the clutch once it would be stuffed as the oil soaks in and you can never get it out , (if its fibre) more than likely its slipping more when it hot, woiuld this explain it ?

SO many people say redline is no good for syncro boxes and blah blah Here it is people , Im a gearbox biulder of 6 yrs and its f*kING FANTASTIC , in freshly rebiult gtr boxes we use it Even in some diffs , DONT LISTEN to the rubbish out there i swear by this stuff,

i have an exedy single plate heavy duty wich i got the boys down at dakin to alter the pressure plate a tad for more clamp force, 30000km and 340rwkw and its still going fine,

have you used a clutch alignment tool to centre the clutch in the middle of the flywheel ? or else it will not go into the splines, also try putting it in gear and using the tail shaft to turn it over to help you line it up cheers.

If i wanted to run secondary injectors in my rb26 what would i need in relation to ecu ? as do i need a seperate unit to operrate the injectors or do i take the pulse wire from the ecu and loop it into the second injector ? or will this overload the circuts on the power fc just curious cheers pete

still got it price drop 1300 , want it gone

ive driven a few vl turbos with gra and yet some have twin throttles, others dont , latest one i drove was 381kw atw and thier was no lag you speak of depends on the tuner, cheers.

no injection kit on the market can flow those sort of power levels, unless 2 injectors are used per cylinder. cheers

like im sure many of us i drive my gtr to work for a bit of fun but with petrol its getting outs control lol anyone thought of putting lpg on thier gtr? i think gas research would be the only way to go due to the injection not beeing able to keep up with the power of gtrs. previously i converted a 180sx with a ca18det (4 yrs ago ) and it produced 220kw atw, on gas research, any thoughts?

price drop 1600

sounds like clutch drag lol

you could be hearing the syncro wind up when your pushing it hard into first is it only when you push it hard? try it and let us know , as if its that dont worry about it lol its meant to wind,

up you go

Should have said it before lol Standard build was completed new rings bearings and crank,

Thnx alot for the info and suggestions i got it all sorted,

Item:R32 gtr long motor Age:? Condition:Suspected spun bearing Price:1800 To Fit:watever you want Location:Ferntree gully melb Contact:through here pm me Comments: Had this motor rebiult and it lasted less than 4 hours of actual driving time, so i cracked it and built my own, i heard what sounded like a spun bearing gung gung gung ,lol drove it for about 10 mtrs once heard then swithched it off so thier should be very little dmg to the crank wich was brand new on first biuld, also bores on block were only honed so its re-usable, what you see in the pics is what you get if your interested gimme a pm,

hey all got my car home last nyt and turned the key off let the timer kick in blah blah went to start it again and it started then stalled, and for some reason the fuel pump earth just died? Now i want to know why is it a shielded earth .. according to the stupid manual it goes to the fuel control mudule lol were ever the f*k that is Is it ok just to bypass the earth and run an earth straight to the body as this is what i have had to do to get it to run again, Oh and its got a nismo pump in it to, cheers pete any ideas or info would be greatly appreciated

its just threaded rod lol take it out and replace it with all thread,

anyone?

hey. chasing some stone guards (plastic things) for my 32 need the one that goes under the engine and the passanger side front one lol im having trouble finding them so let me know if u have got them or its off to pinchapart to get some hahaha cheers

dunno forgot was i was gonna type so i left it at that ahaha

awesome ill give them a

Hey all im located in the eastern suburbs wondering who you trust to get it tuned by, and roughly the cost i need a full tune, cams timing injectors . blah blah, Any information would be very much appreciated.

mechanical tech of 5 yrs biulding engines and gearboxes for a range of race/road cars getting boring now !!

Can u feel it through the gearstick like 2 gears hitting each other then its the syncros failing and not keeping up with the rest of the box DOG BOX IT