dmac_25

Puts hands up we did Jesses Mazda and his crazy mate Ben scary front wheel drive 360kw equal taking up both lanes while trying to read a bloody laptop

I can sell you one (airbox)

Here is a few dyno sheets i got, the first one is at 7 psi and the second was at 10 psi. Just a matter of time before the client brings the car back to pump it up a bit.

Finally got the car onto the dyno only had enough time to get some prelim tuning done up to 10psi as the client wanted the car back so didnt get enough time to install the boost controller. Here is a video of the car on the dyno, as i said earlier that we used the RB20 gearbox and as you can here in the video the 4th gear syncro is worn and has seen better days. Enjoy some RB sounds on the dyno.

I would say around $50 aud would cover it

Will do mate should nearly tip the 300 mark the current tune in it toped 315 at 20 psi and very similar spec engine

Got the car up and runing last night fixed the few issues it had and test drove it. Test drove very good even at 8-9 psi moves nice. Will get it on the dyno and tune it up

For sure the rb26 is a great engine conversion for any Nissan I've seen them go in 260z's would have been nice if Nissan had made them 2.8 or 3l from the factory but they are still a great engine at 2.6

just need to find time to chase the AFM issue then onto the dyno

Block came up nice all the water jackets are nice and clean looks like a new block just a wait now for parts then off to get bored and then stuck together

Head is almost off read for some work to be done then put the cam in and back together for some more boost i think 20 psi sounds nice and even

I was at the last one great weekend got the car in the spread in HPI which was good bit of a bummer its in SA this time would go for sure if it was back at winton and i had the 31 going this time

I just use the english to navigate around the site the translation is crap most of the time

Yeah that's it everything is about cost I do use his site a lot tho as it's all English

Yeah I didn't supply them so hit and miss with used afm's. Might try some afm cleaner on it to see if is just dirty as I am still getting a small voltage out of it but not likely going to fix it. To be honest I don't get stuff off Aaron I find his prices over the top compared to my guy in Japan and the wrecker I deal with is closer and does better prices than Aaron does

Coburg

Shaking my head in disgrace for the liking of that kid who was on you tube

Faulty afm holding us up now good old eBay specials turned out to be no good

Hey mate they are coming straight from nitto as on the first line in the first post. And yes mate shipping to sweeden is possible. David

Yes we did do Jesse's car and we also did his good mates 626 crazy piece of work at 360fwkw very scary and funncar with all that power at the front. Lane skipping fun. We also use all quality Martini products thanks Jesse

Nice as mate what turbo's do you plan to use?? I do a stock gtr turbo rebuilt kit to steel wheel and 360 deg bearings brings them up to 500hp same as r34 gtr n1 turbos but they are ball bearing. I do them change over 1300. I'm using them on a clients rb26 in a gtst. Thanks mate gone through many stages and ideas on how to build it and I think it will be a clean stock looking gtr with enough power to boot at 25psi

Yeah mate I know how you feel especially when the car sits there in front of me while I'm working on other things. But we have to earn cash to spend on these beasts. Love nistune best ecu going around for street Nissan's even budget track cars does more than enough by far the top ecu for bang for buck. All those Nissan ecu's people used to ditch and sell cheap not the case now when they can be turned into the same thing a power fc is. I highly recomend them