dmac_25

+1

Hey Mate, If you get the board i will instal it and tune it for 550 fair?

Hey mate, Let me price up a nistune and i will get back to you

Have you got a type m bar in black? good nick would be good

Hey mate what colour was the boot before

How you going to get ripped nick but the cops out in your area they love you out there lol. No probs west give me a buzz and let me know what you want

Hey mate ill give you 50 for the clutch master cylinder and 50 for the bonnet latch and the support it bolts to

This is a group buy for 10 Adaptronic e420c ecu's and plug in loom with 3 bar map sensor. This will suit any RB engine, so you can ditch that AFM. Im also giving the option for the ecu to be installed and tuned at an extra cost. The price is $1100 plus $10 express postage aus wide, if you choose for us to install and tune the postage is not needed. RRP on the ECU is $990 and the loom and sensor is $300 so a good saving. Here is the link to the Adaptronic website where you will find all the specs and features. http://www.adaptronic.com.au/products-e420c.php If you need any more info contact either me or Rob from Adaptronic for more info. 10% deposit is needed to secure your order. Either PM me or give me a ring on 0438 804 282. David

dont be a girl nick the mazda 2.oL goes bloddy hard would break the old toyota in half. you better be bringiing it to me to work on. Hey West we can do pretyy much anything tell me more on what you need done? Matty for sure let me know when you want it done now using Martini oil so she will be looked after

hey mate who does your work for you? check out the link in my sig

hey mate ill do you a swap for the latch and the bar it mounts to for a GTST one you will need the whole lot to make it fit.

Hi dazza as i wrote in the email, the only way to tune a stock ecu is a re map and if you want that can be done later. A power run will let you know what you currently have and how it is running. Any jap cat back with a mid mount and rear muffler will be legal and give it a nice rb note. As for a major service that would include new water pump timing belt tensioner and idler always good while the front is off to put in a new thermostat oil plugs coolant then diff and gear box oil as well for the full works then the usual checks. The cost start to add up in just parts for a major service. David

Nice good choice on the house. The old 626 make a shit load of power evn with a stock engine. have you get the fwd version?

Hey Dazza its my workshop so tell me what you want and i will give you a price. David

Yeah jesse its one crazy car skipping lanes no problems. Changed badges did you justin last i seen you had a 13. Fair ramp Paul pulled f'n hard come up nice on the rollers puts my car to shame. Needs a 3 bar map sensor and some more boost and will be a crazy wagon

Hey mate check the signiture for my link, shop is in paky

The car will now have an Adaptronic ecu with 3 bar map sensor and boost controlled by the adaptronic. Also happy to sell it for less just throw me an offer

I will let you off this time just because you were watching the bombers. But was a good day a tad cold and wet but no bent panels bit of spinning hey russ. lol

Good to see Dezz you are coming i will see you there if i get the car on the dyno tomorrow night with the adaptronic in it cutting it fine. Pretty easy to get there here is the link to the gippsland car club site that should help you out. http://www.gippslandcarclub.com.au/contact.html It should be the same as any other track day just enter in the skyline class

What is the price to rebuild a set of GTR turbos in both bearing forms?

This thing pulled good power. running wolf v400 Garret 3037 750cc injectors Quad throttles 22psi boost

Z32 AFM with plug. 250 plus postage. PM or txt 0438 804 282

Hi, Ive got a drift steering wheel i had on my r32 but have now gone back to my stock wheel. Its in good nick with boss and horn button. PM or call/txt on 0438804282 $120 posted aus wide

Hey mate send me some pics

3K for the whole lot mate