geraus

Hey there, Ive owned 4 Blitz LM coolers........... You just need to trim the Left side and the Right Side......... Also where are you geting your blitz LM from and how much? i might be intrested........... one for my friend, let me know straight away.

bumpsss

COOLER SOLD.

Hey im intrested, but im confused with the CAMS licence.. How do you get one of them?

bumps , any offers

Hey there, The cooler pipe is broken because when i was parking at buninngs warehouse carpark i aciddently when forward and it hit the parking curbs cos my car is lowered with TIEN HA's dropped so when i went forward it hit.

Hey there guys, Im selling my Blitz LM Cooler for $600 It has a missing pipe from the bottom u can get one made at an exhaust shop for $50 . This cooler is not required cuting a hole in your engine bay as most intercoolers people cut a hole in the engine bay which is not good. With this cooler my car was tuned with it doing 233kws @17psi if you guys have a look @ my other fourms my car was tuned @ status tunning by Trent. Therefore this intercooler can be capable of high PSI Having the intercooler this way will still have your engine bay looking stock because its going through your return holes stock. as im selling it because i want to upgrade to a greddy plenum for higher mount turbo. I am located down the Northern Suburbs pick up for inspection is available. Postage around AUS is available to at the persons expsense. ( Skyline 93/08-98/05 ECR33 RB25DET Size L610 X H266 X W68mm AU $ 1,067.80 ) from nengun. Also comes with the blue rubbers and the hinges to hold it. Here are some pictures:

As the title states..... R33 DIFF non ABS thanks. $150

get BCPR6ES gapped 0.8mm

where can i get the spanners for my TIEN HA's from?

looks very nice

i'l give u 2k for it?

Get a turbotech manual boost tee, there on ebay about 40$, They hold boost pretty good. Mine use to hold up to 10-12psi on stock turbo with full exhaust and front mount. Get that and when you connect it, dissconnect your stock boost solenoid.

Yeh. I got pulled over by TMU.... Cops dont know what there talking about..... Some cops say you can have it and some say you cant, Either have a pody with a mounted bracket or have a cooler with a stock air box.... Also RWC's mechanic shops wont pass with your big intercooler because on skylines there is an airbag sensor and they reckon it blocks it.

Splitfires ......... Get them. They are very good. This system replaces the original equipment coil pack and ignition wires with a direct ignition coil on plug system. The increased ignition performance found with the SplitFire Super Direct Ignition System is a must for all racing and performance enthusiasts.

Check your coil packs, Spark plugs....... Make sure there gapped right as well... 0.8mm Try and use BCPR6ES 0.8mm

Greddy Type S plus Adapter is SOLD. Left is Blitz Hot Pipe come on guys.

yeh Tao, i want an op6 rear !

Cool cool, Thanks for the replies.

Ok cool, i'll have a look, thanks Trent. I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

mad thank you very much !

cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so. Thanks, Geraus.

it was running fine though... what could it be ? sensors or anything?

Hey guys, just wondering, the overnight i drove down to MT Macesondon on the high mountains and was just wondering, my water temp readings were wierd, i wasnt even thrashing it and my temp would go up to 103-106 and i didnt even put my foot down at all when im up high, but when i was driving down normally my temp would eventually drop.... its wierd... my car temp is wierd like its going up and down when i dont even thrash it? I have ordered an ISC radioator hopefully it would make a diffrence... Also my coolant has been changed 1month ago...

18psi is very bad, make sure your getting an accurate reading.......... Sounds like your turbos gone man........