Jump to content
SAU Community

6BANGER

Members
  • Posts

    85
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by 6BANGER

  1. I would to ask a few questions about this os88 issue . Did you end up fixing the oil spitting out of the breather hose issues?
  2. I will try to test it with a Nistune ECU as soon as I get a hold of one. In the mean time, I was hoping its a matter of running a direct feed someone to by pass this issue
  3. I have the same issue and been losing hair everytime I take another look into it. I can understand the frustration Here is what I have tried so far... 1. Run a wire from the speed sensor in the gearbox to the cluster and ECU 2. tested for continuity between ABS computer and cluster (speed signal wire) - all ok 3. tried a second hand cluster that was working at the time 4. used self diagnostics and got the following codes (26 - 44 - 46 )
  4. I got a 25Det NEO installed in a R34 GT and lost speed signal. I checked the gearbox and found the black and brown wires that run to the speed sensor. Question is, where abouts on the cluster do I need to run this wire to? I have already tried running a direct wire from the brown on the speed sensor to pin 19 on the back of the cluster which didnt work. I can confirm there is nothing wrong with either the sensor or cluster so its down to a wiring issue.
  5. Before we get into it, I have been searching the entire Internet and the R34 manual for the past week without much luck. Now, here is the problem. I have a R34 GT which came with a RB26 engine setup for RWD. It also came with the RB26 loom and ECU. This Everything worked well along with the R33 gearbox. After building the RB26, I decided to swap the motor with a RB25det NEO engine, gearbox, loom and ECU. Yes, this is when the speedo stopped working. I have traced the issue down to the TCS/ABS ecu as the GT (NA) ECU does not have TCS but the GTT ECU is now looking for a signal from the TCS. Here is what I have tried so far... 1. Run a wire from the speed sensor in the gearbox to the cluster and ECU 2. tested for continuity between ABS computer and cluster (speed signal wire) - all ok 3. tried a second hand cluster that was working at the time 4. used self diagnostics and got the following codes (26 - 44 - 46 ) 2 of them related to TCS/ABS The golden question is How can I get my speedo to work again???
  6. Yes, the left wheel speed sensor is connected in the engine bay. However, the wiring loom near the ECU uses different connectors between the GTR and GTT. I was hoping someone can shed some light into how the GTT body loom can be connected to the GTR ECU.
  7. Hey mate did you end up doing the engine swap? I have a R34 GTR RB26 in my GTT and currently running the RB26 engine loom and GTT body loom just like you mentioned. Engine starts and drives but I have the ABS light on due to the left wheel speed sensor.
  8. Hey mate I used a universal TPS from plazmaman. Here is the link. https://plazmaman.com/shop_itemdetail.php?itemid=320
  9. Good condition rear seats. No rips or marks. Located in Perth WA - $350
  10. RB25 NEO Plazmaman plenum and throttle body $1000. Garrett gt3076r, 6boost mani, hoses/lines, exhaust dump with wastegate flange $2,500. RB25 Neo PowerFC inc boost controller value and hand controller $1000. PWR front mount and piping, blitz bov, z32 afm with plug $750. Also have 1000cc injectors (unsure of brand) with fuel rail and plug in loom and sard regulator for $750 This is a complete 400hp bolt on kit that will save you the cost of fabrication. All Located in Perth, WA
  11. I'm looking for a 60mm genuine Defi link meter bf oil pressure gauge, sensor and wiring. Prefer model df04401 which the White light version 0417796179
  12. Wastegate is 44mm and not 38. 1 sold and 1 left Drift wing sold Twin pipes exhaust sold Turbo kit sold Mono steering wheel sold R34 cross over pipe. Sold
  13. sorry guys have been away for a while. R32 Guards sold R34 GT Wing - Black
  14. Pictures China Garret GT35 turbo kit - $400 includes high mount manifold oil feed/drain pipes dump/front pipe 38mm wastegate Cusco Castor Rods (fit s14/s15/r33/r34) - $120 RB25det Siemens 550cc Injectors with plugs (new) - $350 RB25det stock Water Pump (new) $150 MOMO steering wheen (new) - $120 External Wastegates 38mm (Pro Boost) - $100 each SR20det dump/screamer pipe - $70 S15 stereo surround - $30 S14 Ganador style mirrors (not electric) - $100 RB26dett Twin turbo pipe with elbow - $100 RB26dett stock dump pipes - $100 R34 Rb25det Alternator (off R34) - $50 Rb25det NEO cross over pipe - $30 R34 GT wing - $150 R33 Rb25det Neo cross over pipe Drift Wing (new) - $150 3" Xforce TBE with twin pipes (no cat) $350 Tail lights with white covers- $60 Side Skirts 400R style (new) - $180 R32 Front gtst guards (no dents or scratches) - $150 Stock castor rods - $60 Tail lights - $60 Indicator (driver side) - $50 Located in: Canning Vale Contact: Razzak on 0449 937 757
  15. This GTR was built and tuned to over 800hp in Queensland by Gavin wood auto tech with no expense spared and was recently fully engineered in WA with permits for all modifications including the carbon fibre bonnet. Car was de-tuned down to 1.5bar for engineering and currently making around 540hp. Has lots more room for power to run another bar of boost. Very long list of modifications with receipts for almost all the work done (over $70k spent) 1995 skyline R33 GTR Full built forged motor with all top line parts like HKS, Nismo and Greddy Recently had the 100k service done by Galvsport. 92,000 km Vipec ECU Greedy T88 34D turbo 50mm progate wastegate with screamer pipe HKS 272/280 cams RIPs oil sump OS Giken triple plate clutch Turbosmart E2 boost controller Splitfire coilpacks 100mm Greddy intercooler and piping kit Powertune exhaust manifold Custom 4" exhaust system Greedy inlet manifold Twin Bosch 044 fuel pumps Greddy oil catch can Greddy oil relocation kit Greddy oil cooler C’s short shifter Speedflow fittings all around HKS fuel rail 2 x Speed flow fuel filters 2L fuel surge tank 750cc nismo injectors Sard FPR Toyo Radiator Slotted brake rotors Brembo Brakes Nismo carbon fibre bonnet 19x10.5 +12 rays TE37 wheels in gloss black with 275/30/r19 tyres RAYS wheel nuts Cusco coilovers Ganador carbon fibre side mirrors Carbon Fibre rear spoiler Genuine nismo aluminium fenders Twin Thermo Fans Greddy turbo timer This car is not your average GTR. I will be doing the driving once a deposit is made then we can discuss a test drive. Plates included in sale. Price: 40,000 Contact: Salah 0417 796179
  16. 6BANGER

    IMG 2484

    From the album: WPN GTR

  17. 6BANGER

    15

    From the album: WPN GTR

  18. 6BANGER

    14

    From the album: WPN GTR

  19. 6BANGER

    13

    From the album: WPN GTR

  20. 6BANGER

    10

    From the album: WPN GTR

  21. 6BANGER

    9

    From the album: WPN GTR

×
×
  • Create New...