sleeper7

Hi guys, Need to get my hands on a stock r33 s2 boost solenoid for my epa test, let me know if you got one lying around I can buy. cheers, steve.

Hi guys, Need to get my hands on stock R33 GTS-T fuel pump for emissions test

Got ahold of one, thanx Nigel.

Hi guys, Need to get hold of a standard air box for r33 turbo to clear a canary. Let me know if you have one for sale cuz i can't find one anywhere... thx steve

damn, just bought a new drift filter yesterday for my oil change this weekend. I'l let u know what the results are

Yes, it is quite similar but this is for ppl who use 'stock cooler piping' not just the hole where to stock cooler piping used to be

Hey guyz, just thought i'd post up a cai mod for all u guyz who use stock cooler piping and want cooler air for your pod. This simple process only took 10mins and will give u noticable power gains and economy u will need: 40-50mm hole saw ($10) reputable drill ($150+) 500mm of 40 or 50mm diameter flexible hose from clark rubber ($11) a zip tie ($5 pack of 50) half a brain (priceless) now remove or push away the pod to locate the already pre-drilled hole, this makes life alot easier. Problem is i accidentally deleted the photo but u get where it was from this pic (just below the square hole). Now just stick the drill bit in and slowly drill ur hole over approx 1 minute and u'l be left with this when u look down the hole you should see the ground and a good spot to mount ur hose now get under the car and screw/feed your hose through the hole now u can judge how much to cut off the hose to get a perfect fit to where u want to mount it, I zip tied mine to my cooler hose like so but it can be wherever u like, but the less bends, the better. and thats it!, my advice is also to make a partition for ur pod aswell, these mods together will help greatly

HAHA, I pulled the chain off when i imported it. I shouldnt hav any problems with downforce tho, or maybe it's just wearing out my rear shocks from the shear weight of it lol

But it aint no GTR wing

That was me!!

HKS almost always uses Garrett turbo housings then change the bearings, fins ect. The T51R is a hyped up version of the garrett equivelent ( as u could prob judge from the price difference ).

Cool, thanx for the feedback fellas

OK, thank you, I just couldn't find the oil cooler thats why i thought it was that. My mates didn't have that in front of his so, i was guessing thats what it was.

Hey guyz, I just wanted to know if any of you guyz have seen an oil cooler as big as mine. It took me a month after I bought the car to realize that it wasn't my radiator!! hehe. Just thought i might hear some thoughts as it was imported like this. Oh yeah. Thought i might show u some new pics of my turbosmart silicone hose i just replaced, really brightend up my engine bay.

I'll take both seats if u still have them

PM sent

you can buy blue or black silicone ones on ebay, look just as good (if not better) and wont heat soak.

Don't bother putting 40 or 50 on, just dump one huge one on the roof and people will think you Jaws returned on road.

when u fold in your mirrors, even though u are in the middle of nowhere

I think I'll get some of those

石川 Ishikawa (stone river) 海斗 Kaito (big dipper of the ocean) Big dipper of the ocean? hehehehe.

Hi, thanx. U need to look in the coin hole and u'l see a little black cap at the bottom, take the cap off with a small flathead screwdriver (from the right hand side) and u'l see a screw under that. Unscrew that and then you can yank it off, don't be afraid to use a little force because its clipped in aswell. Same goes for the passenger side.

Yeah, thanx mate. U can't c in the photos but at night under the proper light u can see my purple pearl through the clear which i put on top of the glitter spray ( the photos were done via my phone so they don't look right). Anyway I got the autometer cobalt series because they were the only gauge that matched the stock cluster and i wanted the needle in the gauge to be lit, but little did i know that they lit up blue at night, so i had to change my cluster lights cuz i hate it when they don't blend in. PS. those are AVS shoes u c, but will be white 19" Enkei soon i hope..

Thanx, I'll look in to those. I'm gettin a new stering wheel soon with the nos buttons on each side which I'll hook up to water spray for the cooler.