SXTACY

Hi All, The following gear was taken out of my gf's car almost 2 years ago when she sold it and has never been used since. It is all in excellent, near new condition and was rarely used. Ideal for someone just starting out but wants something cheap and well cared for. The following is for sale: ---------------- * Pioneer KEH-P8650 Tape/Tuner CD Controller Don't have much info on it 4 x 45W Tuner + Tape player + Cd Controller Remote Control RRP when new was around $950. Paid $750 ---------------- * Pioneer CDX-P1220S 12-CD Stacker Suits above HU and quite a few newer ones ---------------- * Kicker Impulse 652xi Amp Great little amp, excellent for fronts or single sub rated power--- rms power @ 12v 65 watts per channel into 4ohm ( stereo) 95 watts per channel into 2ohm (stereo) 190 watts ( bridge/mono into 4ohm) dynamic power @ 14v 90 watts per channel into 4ohm( stereo) 130 watts per channel into 2ohm (stereo) 260 watts (bridge/mono)into 4ohm) special built in features 1-- high level inputs and low(line level inputs rca) 2--- variable gain control 3---built in 2 way crossover ( high pass/)-(low pass) 4--kicker eq ( variable bass and treble control) ---------------- * Kicker Competition 10" Subwoofer in carpeted box Nice little sub, hardly any use, still looks new. Professionally built box, carpeted, suit almost any car as box is quite small. Has amp bolted to back of it. Size (IN., CM) : 10, 25.4 Impedance (OHMS) : 4 Maximum Amplifier Power (WATTS PEAK) : 250 Maximum Amplifier Power (WATTS RMS) : 125 Sensitivity (dB 1W/1M) : 87.7 Frequency Response (HZ) : 30-500 Mounting Depth (IN., CM) : 4-9/16, 11.6 Mounting Hole Diameter (IN., CM) : 9-5/32, 23.3 Min Rec Sealed Box Vol (CU. FT., LITERS) : 1.0, 28.3 Max Rec Sealed Box Vol (CU. FT., LITERS) : 2.4, 67.9 Min Rec Vented Box Vol (CU. FT., LITERS) : 1.25, 35.4 Max Rec Vented Box Vol (CU. FT., LITERS) : 1.75, 49.6 ---------------- I know she paid around $1500 for it new, not sure what to ask for it, so please feel free to let me know what it's worth, I'll update this post as soon as I know what a reasonable price is. All items in Melbourne. Happy to freight at buyer's expense. I'll post pics up in the next few days. Until then, here are some pics I found on the net of the same models: Pioneer KEH-P8650 HeadUnit Pioneer CDX-P1220S 12 CD Changer Kicker C10 Subwoofer Please PM me with any questions or offers. Kind Regards, SXTACY

No it has a GT30 flange, hence the talk about modification to a cheap manifold (correct me if I'm wrong). Either way... it's well worth it and you'll soon thank yourself

Is that a clear cover with slots for easy access to the gears??? damn smart idea... and EXTREMLY nice looking... well done mate... looking forward to seeing the results. Cheers, SXTACY

This is an awesome turbo setup at a very good price! I know when I bought my turbo, the RRP was near 4.5 - 5k from HKS Australia (BD4s)!!! Don't forget it's a HKS unit not a Garret, which makes this turbo even better. Whoever buys this will not be disappointed, good luck with the sale!!! Free bump

If you look at the papers and even online like seek.com.au, you will find it is quite common to outline the job description before mentioning the employer. This is what agencies do all the time. Anyways, a person who is interested in mechanics, has the time and finds the location suitable will apply and be told the whole story. Cheers, SXTACY

Shows how much I missed out in the original post. Sorry! Okay, the position is FULL TIME and the workshop will be advised to serious applicants only (upon receipt of resume). Cheers, SXTACY

Hi Dave, Doesn't have to be fully qualified but must have good knowledge of automotive concepts and be able to work unsupervised. He doesn't mind if the person is fully qualified or not, as long as the person can do the job. Good point abut the Vic section, mods, can you please move as you see fit. Cheers, SXTACY

Hi Guys, Not sure which area this should be in so mods, please feel free to move as required. A mate of mine has a FULL TIME mechanic position in a busy performance workshop in Northern suburbs (Melbourne). I guess the duties would be the same as any other mechanic, except you'd have exposure to the performance side of things as well. If you know anyone interested, please PM me and I will forward you the details. Cheers, SXTACY

PM down my way too please, so Revhead's not constantly sending PMs, can someone who has received it, please forward and reply to this thread with who you have forwarded it to. ADVThanksANCE (who can work this out? hehehe) SXTACY (Vic)

Sorry SOLD. Mods, please feel free to close thread. Cheers, SXTACY

Hi All, I have a friend who wants to sell the turbo and manifold off his S15. * Turbo - Done 8,000 k's. - Never boosted, no shaft play and in perfect condition. - Looking for offers above $700 * Manifold - Steam pipe - Used for only 1,000 k's before upgrading to high mount setup - Only recently HPC coated (less than 3 weeks ago) - Paid $900, looking for offers around $500 - $600 This combo would be a great upgrade for an S13 or S14. All enquiries, please email me on [email protected] Kind Regards, SXTACY P.S Located in Melbourne

Hey kwazza11, mate I don't mean to argue (coz I'm new to this forum) but the idea of such a forum is so people can openly ask questions and learn a little from those who know. We were all at a point where we didn't know what a gallery was... However, having said that, yes, if you don't know what an oil gallery is, please don't try to do the conversion yourself as there is a steep learning curve you still have. But ask as many questions you want, that's what this forum's here for - discussion Cheers, SXTACY

Hey Leewah, I sent you an email regarding the kits, still haven't received a reply. Sent from [email protected] Oh well...

Hey Leewah, Sent you an email, very interested in the titanium kit. Cheers, SXTACY [email protected]

Hey 93: Here is the link for that PDF: http://home.iprimus.com.au/mawler/RB30DET.pdf Posted by Joel. On the VCT topic, 25t posted this: "To solve the VCT oil feed problem I removed the Vct solinoid and drilled straight down the vvt oil feed galery through a brass plug and into the cavity which houses the VCT solinoid. " Regarding my engine... it won't be completed anytime soon (like maybe at the end of the year). I was doing the project as a sideline because my main project is my S15 which has a HKS 3037 and full engine rebuild and a host of other goodies that I'm trying to finish With the RB30/26, I was going to drop it into something crazy like an S13 or I may lose the plot and put it into my S15... now that would be different Cheers, SXTACY