Lock_to_lock

Make: Nissan Model: 180sx Milage: car - 40,000 Engine - 110,000 Transmission: RB20 Gearbox Location: Adelaide, SA Complied? yes RWC supplied? N/A Currently registered? No Price: 8,000 Contact: Hadleigh 0411 143 556 Comments / Modifications: Hey guys. Decided on selling my 180sx. It not yet completed but has everything needed to be done. The car was origanally CA powered. I decided to put an RB20 into it. A ceffiro cross member has been fitted to support the rb20. All that needs to be done is get a power steering line made up, and the engine and gear box will drop in. The CA tail shaft bolts straight up. Car has a 3in cat back system, all that is needed is a rb20 front/dump pipe for the system to line up. The engine is in very good condition, it was purchased from Japenese Import Spares along with everything else to complete the conversion. The car is straight and chassie rails near perfect. The interiour is also in very good condition. As for suspension the car has tien coil overs. Handels very well! Everything needed is here, i just dont have the time anymore. Wish i would stick it though. This will be an awsome car when finished! I wil get some pics of the car and engine asap. If you know ANYONE that may be interested plase let them know. Cheers, Hadleigh

Going to check out a Rb25 tonight mwahahaha!

Took some better pics today.

Any news on those wheels? picsorban!

Thanks man, I WANT JIMMY TO SELL ME HIS SKIRTS hehe. Got motorvated today, ordered water pump, front seal and gates timing belt. I also took some better pics Same spot but meh. enjoy.

oh yep. i know exactly what you are talking about! Thanks for that.

AD4M, very clean! I did notice i had a slight bit of over hang, where abouts did you say i need to re-drill those holes?

bump

nice clean 4 door man. Keep it up Edit. If you every decide to sell your side skirts let me know, very keen.

mmm very nice.

once again, thanks for the comments! I really need to stop taking pics with pov phone camera. might take some nicer ones tomorrow. Not to sure where to mount the number plate, was thinking about passenger side above the vent?

hey guys. Im a bit over whelmed with trying to figure out what brand of tire and size would best suit me. Im using r33 gtr rims on my r32. 17x9 from memory. Im after a good all rounder. A good tire for street driving, but will hold on for those spirited hills drives and the track day here and there. Im not too sure on size either, i currently have 215/45's on all around. there is a lot of stretch. I was thinking something more on the lines of a 225/45? This will give a bit more tire to the road but will still have a good look. I was looking on spending around $800 or so. I had toyo's in mind. ANY advice and words of wisdom are appreciated. Cheers, Josh

hey guys. Im a bit over whelmed with trying to figure out what brand of tire and size would best suit me. Im using r33 gtr rims on my r32. 17x9 from memory. Im after a good all rounder. A good tire for street driving, but will hold on for those spirited hills drives and the track day here and there. Im not too sure on size either, i currently have 215/45's on all around. there is a lot of stretch. I was thinking something more on the lines of a 225/45? This will give a bit more tire to the road but will still have a good look. I was looking on spending around $800 or so. I had toyo's in mind. ANY advice and words of wisdom are appreciated. Cheers, Josh

lol

Ok, bit of an update. Finally found a genuine gtr front bar, lip and reo Hopefully will have the front seal, water pump and timing belt done in the next few weeks. Also got to pick up a few small things, order some sway bars and keep saving for re-spray!

Just got a genuine gtr front bar, lip and reo. please excuse the pov phone pics and very dirty car.

WTB R32 GTR front bar with lip. With reo if possible. Pm or call on 0401 227 678

looks really good. I think i know what im doing tomorrow haha.

Looking really good mate. What happened to the GTR front bar?

paint the bonnet and grille to match the car.

Iv had a search but cant find that manual. Can anyone post up the link? Or it would be great if anyone knows which pins from the lug i need to connect to the reverse wires...

Thanks guys, i don't have any of the auto loom any more, so i think im going to have to run wires from the correct pins in the brown lug to the correct wires in the auto box...

Hey guys hoping i can get some help. I have done a search but havnt found anything. I have recently done a manual conversion on my 4 door 32, but now i want to wire up the reverse lights. I know that i have to conncet the 2 wires off the box to a plug somwhere in the engine bay. im hoping to do this tomorrow on my day off. Any help is MUCH appreciated! Cheers Josh

Hey guys. Not really a 32 but on a 32. Got some stickers made up. What yous think? There fairly self explanatory

Yeah same here, i wont be putting a kit on mine. Just GTR front. keeping it nice and simple Well it doesn't look like ill be making it out to drift prac on July the 6th. Hopfully in the next few weeks ill get replacing the front seal, water pump and timing belt as well as shimming up the diff. Ill keep this updated with any progress. Cheers for the comments!