Jump to content
SAU Community

Piggaz

Members
 View Profile  See their activity

  • Posts

    8,928

  • Joined

  • Last visited

  • Days Won

    40

  • Feedback

    100%

 Content Type 

Everything posted by Piggaz

  1. Piggaz
    Drove on E85 without the sensor for 12 months. Didn't touch anything. Was a tad richer with the Caltex stuff (going off the wideband) but it never knocked.
  2. Piggaz
    They're the best! Drive around and give no fark what's in the tank
  3. Piggaz
    ^. Can't say I've had the same results. EVERY tune on my own car the E85 has made more grunt everywhere AND boost is higher earlier. Same car, tuner, dyno, turbos/setup/cam timing and in some cases same day! That's on more than one turbo setup too!
  4. Piggaz
    That makes sense. Unigroup got rid of my ignitor and replaced it with some box that lives in my passenger footwell. They did that went I jumped across to the Link.
  5. Piggaz
    But it's the E85 which allows you to dial in more timing. Which came first, the chicken or the egg? .
  6. Piggaz
    N1 pump with a factory sump filled with 6.5 L of oil. I'm not sure if it will work as it should with a deeper sump.
  7. Piggaz
    Springs got sent today, manifolds have been sent by SAL. They should be here in 2 weeks. No point paying extra postage for a heavy item got no reason. Pics up soon!
  8. Piggaz
    Looks very neat. Bring on version 10 ,
  9. Piggaz
    Get decent mufflers!
  10. Piggaz
    You have an option of walbros or 044's.
  11. Piggaz
    http://www.skylinesaustralia.com/forums/topic/205993-transmission-lubricants/ Click me. Stock sump GTR, just fill to the middle of the hump. From memory its about 6-6.5 litres. Have done in my GTR for the past 5 years.
  12. Piggaz
    Oh fantastic. Do you have the bolts aswell?
  13. Piggaz
    Hey guys, I'm after RB 26 turbo support brackets. NFI where mine have gone. I'm in Sydney. If anyone has a set just laying around and don't want I'd love to take them off your hands. Cheers Paul.
  14. Piggaz
    Speedflow bulk head fitting. I'm assuming you just drill and tap the top plate. What size did you use?
  15. Piggaz
    ^^ Exactly.
  16. Piggaz
    Gotta be happy with that man!!! Awsome looking curve! How did he like the 9.3:1 compression ratio? Did he play with cams?
  17. Piggaz
    STILL? There must be something in this. Remember my last lot ? It was E77. Wherever Dave gets it from seem's like the go... but oh so far away! Rozelle, pull your finger out!
  18. Piggaz
    Mine? PM me and I'll explain
  19. Piggaz
    I remember something about a 33 thou squish. How does this change when one of the pads have been removed?
  20. Piggaz
    Block hasn't been decked at all. Head has been decked 1.0 mm at NAPREC. We just have to get the head here and take some measurements. From what I can gather the chamber volume is 66.5cc but that's got to be double checked.
  21. Piggaz
    It will most definately need to be looked at.
  22. Piggaz
    Crank and pistons dropped off this arvo. That should not take too long. Head is less than a week away. Double check CR. Going by my calculations a 1.2 mm headgasket will bring it to 8.5:1.
  23. Piggaz
    Haha. That number gets higher and higher. 1500 cc worth of injector per cyl. It's about 9.5 IF you hold it flat for 1 minute. No idea where you can do that though. I'm sure it could be leaned off a tad.
  24. Piggaz
    Catchcan sold pending payment. Baffle $250
  25. Piggaz
    Yeah yeah. When they arrive from Jap ill put pics up. Patience boys
×
×
  • Create New...