Piggaz

What computer are you running? Have you had a full tune? Cold start maps?

Have you worked out the difference between the Series 1 and 2? There was a thread in GTROC and one of the photo's had a Tomei 2.8 photo. From what I can gather the difference is the crank.... I dont know what the differencees are. I have a Series 1 Tomei motor in mine and no problems.

Mate thats fine. Ill make sure I dont break anything... well try not to

Whats a "GT RS" head worth? Rough spec list Paul? (PM if you like)

Ah its only a drive up the freeway! Oh god i dont know. Let me know what you were thinking (PM if you want) Car by then will have a Set of 19 inch TE 37's in bronze.

I'll put my hand up for that. It aint a 34 but a Series 3 R33. Here is a pic of it.

19 X 9.5 + 12 is the Nismo recommended offset for both 33 and 34 GTR's. I know your 18 inch but the width and offset are the same. http://www.gtr.co.uk/forum/24434-pics-whee...ls-boys-22.html There is a good thread on the pommie forum. Have a look at that. I currently have 18 X 9.5 + 17 and they need a bit more.

Did you have to roll the guards to fit the 10.5 + 12's? I just ordered a set exactly the same but 9.5 inch + 12. Wonder if i have made the wrong decision! Looks awsome though. Black on bronze TE's... nothing better!

Paul. Out of curiosity what was the issue when the OS box was assembled incorrectly?

OS Giken set. Your only gonna keep smashing them. They are cheap enough. I put the Giken billet centre plate in mine for added stiffness!

Bought heaps of stuff from both nengun and greenline. Never once been stung!

Wouldnt that depend on turbo size, capacity, compression ratio, headwork, exhuast size, boost pressure and any other variable you can think of?

08/21/'89 BNR32 Shipped - 02/22/'89 BNR32 NISMO Announced(03/11 Shipped) Air intake in front bumper Sub rear spoiler added Side protector modified Protection net removed Air guide for intercooler newly added Special Turbine Special exhaust minfold No ABS, Air Conditioner, rear windshield wiper or audio Only available gunmetal color - 07/19/'91 N1 BNR32 announced and shipped With GT-R NISMO aero parts No ABS, an Air Conditioner, rear windshield wiper or audio No cross drilled rotors brake cooling air guides attached to tension rods light weight 2 headlight # After 02/'92 metal turbine wheels - 08/20/'91 Minor change. Middle model Bar added in door (50kg weight increase) Projector light modified(H3C->H1) Driver's air bag optional Oil pump drive widened Cylinder block modified (reinforced partly and lighten) Rear caliper seal modified Interior partly changed - 02/03/'93 Minor change Late model. V-spec added Rear dif cover fin removed Clutch modified (push -> pull) Synchronizers modified Brembo caliper added(V-spec) ETS program modified(V-spec) Tires changed (V-spec: 225/50-17) BBS mesh special wheel (V-spec) # N1 model gets to based on V-spec - 02/14/'94 V-spec2 added Tire changed 245/45-17 # N1 model gets based on V-spec2 Besides these, ECU, cylinder block and the size of turbine had been modified some times without notice. Spot welding is supposedly decreased after '94.

Hey guys. What im asking doesnt really have a sub forum so if it needs to be moved then go for it. Im after a few installed pictures of the 105mm ARC Twin entry intercooler. The model number is *M109BCNR33GT*. From what I can gather I may need to modify the front bar to fit this in. Is there anyway I can retain the stock front mesh? Its going on a 97 GTR. Whats the thickest core you can fit behind a stock bodied R33 GTR before you have to take to it with a hacksaw? Here is a little photo of the kit in question . Cheers.

I thought V power racing got discontinued back in August 08? Has it come back? I havent seen it anywhere (Not in Sydney atleast)

How much are u looking for it?

Hey guys. Im doing a cleanout of all my computer stuff. Everything listed works. Only getting rid of it because everyone in the house is using laptops so no need for any of it. Pick up only. Im located in Georges Hall (Near Bankstown) NSW. If it isnt gone by Sunday its going in the bin! Lian Li PC 60 - Needs a replacement clip on the front.- $30 Upright case - $10Winfast A 350 XT TDH (128 MB) . In box - $10 Boston accoustics "digital BA 7500G" SUB - $5 Enermax PSU "EG475P-VE" - 475 W - $10 LG DVD Burner - $5 Round HHD and ROM cables - $2 Enermax EG365VE - 365 W - $5 RAM PC 133 - 128 MB x 3- Take it! Corsair XMS 4000 (256mb 500mhz) x 2 - $15 It would be a shame to see some of it thrown out. Someone out there must want it. 0402 564 237 if you want to contact me or sling me a PM. Cheers

I have here a IBM 21inch CRT monitor. Bought in 2004 I think. Works perfectly. Reason for sale is that every computer is now a laptop so i have no need for it. Located in Georges Hall (Near Bankstown airport). I'm not going to post it around Australia so pick up only. $20 and its yours, otherwise its going in the bin! Contact number: 0402 564 237. Same as this.

Is that with the Hand controller?

TOYO T1R's in 275/30/19 to Sydney?

Where abouts are you located? If your in Sydney i'll lend a hand. I've pulled mine off a few times.

Did you guys fall off the face of the planet or something?

Dig dig dig. Try these guys. I havent rung them yet. A mate gave me this number and reckons that we should have no problems. http://www.consolidatedchem.com/ContactUs.html

Any updates with this?

Wow!!! Basic specs? What MPH and 60 foot?