Jump to content
SAU Community

r32sky_line

Members
  • Posts

    47
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by r32sky_line

  1. Yeah mine sits where the standard intercooler sits but on the driver side.
  2. Looks tidy. Would you trade plus cash?
  3. Mine is mounted behind the front bar on the driver side. I think the oil lines run through the same hole as the intercooler pipe.
  4. I thought it was around 7psi and about 9psi with an exhaust.
  5. check the wastegate. Could be stuck open.
  6. I agree with johnnilicte, the factory rubber inlet is probaly sucking closed on boost.
  7. I'd go the 2530 if you only want 300hp at the wheels. Nothing beats response on a street car.
  8. Possibly vaccum or intercooler pipe leak. Have you had a look?
  9. Pretty sure crank and rods fit with a bit of machine work.
  10. Would be a bit more responsive.
  11. Could try disconecting the battery to reset the ecu.
  12. Should be ok to run 0.9 bar untuned,
  13. as long as the aftermarket fuel reg in on the return line, it will work ok
  14. Have you checked that the coils have 12v going to them?
  15. Most nissan fuel regs are the same, but the angle the return line goes is slightly different. Not too hard to modify.
  16. High flow RB25 turbo.
  17. Probaly only minimal gains with standard cams, but still a gain. Have you thought about aftermarket cams.
  18. I have one for a RB20DET. $50 including postage
  19. I have a similar problem, mine struggles to rev over 5000rpm. would be very interested to see whats wrong with yours
  20. Probaly better off getting a computer that does fuel and ignition, you'll need to alter your fuel sooner or later.
  21. Sounds about right. depends on how much boost really.
  22. What sort of power figure are you making with that turbo johnbarry88?
×
×
  • Create New...