hipsiR33

ok thanks for the advice guys we found the car had also jumped a tooth on timing so hoping to see some improvement. i would really like to see 480 hp from the car but would also settle for 450. air flow meter is not used on the car but still present. Yea the 6boost manifold is on my christmas list and i will hard wire the walbro and see wot happens i wanted the bosch 044 as i had 1 before and it died so i was advised about the walbro to be a better pump. but will bring this all up

The turbo is garett 35/40 and i dont have the dyno graph at hand. sorrry i cant be of anymore help for u 2 diagnose the problem. im not 100 percent sure but i think the cam timing has been advanced 36 degrees and this is thought to be the problem as it my be causing retarding of exaust cam

Hey johno im looking for help not sarcasim so grow up im telling u thats wots going on the vipec computer has an anti lag program whch lets u bring the turbo on sooner

I just found out that the turbo is actuall a garett gt40

ok sorry there. The car has a 3' turbo back exhaust, forged rods and pistons, steel head gasget, garett t38 turbo, 740cc injectors, saard fuel presure reg, walbro in tank fuel pump, plazmaman intercooler w 2 3/4 inch piping, greddy series 1 intake plenum, splitfire coil packs. its all ran by vipec ecu and on bp ultimate 98 octane. the thought im having is that the standard exhaust manifold is restricting flow but i have been told cars will make 500 with the standard

Hi all i am currently tuning my r33 skyline with a vipec ecu and dont know alot about it. currently the car sits at 392 hp but no mater how much we try it wont go past it. im running a garrett t38 and 20 psi is making this number and it should only be half of this the car makes 400ft/lbs of tourque and the car is on full song by 3000 rpm and just seems to fade off. it has all supporting parts for at least 500hp but the car just wont jump over the 392 mark. very frustrating and wondering if anyone has ideas as wot could be causing this????? the car did a water pump on the dyno but no overheating occoured as the problem was found before any damage took place. i would like to see my car hit the 480 mark so any help is appreciated cheers guys

Hi all i am currently tuning my r33 skyline with a vipec ecu and dont know alot about it. currently the car sits at 392 hp but no mater how much we try it wont go past it. im running a garrett t38 and 20 psi is making this number and it should only be half of this the car makes 400ft/lbs of tourque and the car is on full song by 3000 rpm and just seems to fade off. it has all supporting parts for at least 500hp but the car just wont jump over the 392 mark. very frustrating and wondering if anyone has ideas as wot could be causing this????? the car did a water pump on the dyno but no overheating occoured as the problem was found before any damage took place. i would like to see my car hit the 480 mark so any help is appreciated cheers guys this is a fully forged engine

Hi all i am currently tuning my r33 skyline with a vipec ecu and dont know alot about it. currently the car sits at 392 hp but no mater how much we try it wont go past it. im running a garrett t38 and 20 psi is making this number and it should only be half of this the car makes 400ft/lbs of tourque and the car is on full song by 3000 rpm and just seems to fade off. it has all supporting parts for at least 500hp but the car just wont jump over the 392 mark. very frustrating and wondering if anyone has ideas as wot could be causing this????? the car did a water pump on the dyno but no overheating occoured as the problem was found before any damage took place. i would like to see my car hit the 480 mark so any help is appreciated cheers guys

Cooler kit is 33 specific kit.

Hi every1 i have a few things i am still trying to sell viper car alarm with remote start brand new $400 Genuine steel d/s rear quarter for s1 r33 $500 i also have a very used blitz spec r intercooler kit has some damage but still good made 340 hp in my car recently upgraded pipes included $200 PM me Or txt 0411683460 if interested. Genuine buyers only plz

Hi i am selling Genuine R33 front gaurds $200 Also i have a drivers side rear quarter gaurd for sale $550 Pm me if interested

Hi guys im looking to sell this ecu from my car its been installed since 2004 and has never skipped a beat. It is in the standard ecu caseing. Pm me if your interested

SOLD

Hi all I am selling a viper 560xv car alarm w/ remote start, featuring xr plus for extended range. $600 pm me if interested. bought but never used.

picture of exhaust outlet as asked

it was flown in 2008 it did roughly 500kms on car. the car was defected and garaged hardly driven afterwards. Not sure wot the specs are and im in singleton nsw

I have a high flown R33 skyline turbo which is great for a greater boost capacity. $800 and i will pay for postage

sorry not sure wot model it is and no i dont have the controller sorry i dont have much info on it but i will find out and let u know

hi ppl this is a computer currently installed in my car. wanting to sell so make an offer

yeah didn mean to make 3 my computer had a brain fart. Location is singleton in the hunter valley i dont have a picture of the turbo but can get one the car is actually at a workshop at the moment in new castle having a rb25/30 fitted running a t38 turbo hence the sale of mine.

Hi ppl i currently have for sale : high flown r33 turbo $900 ono Genuine front gaurds $200pr Genuine rear d/s gaurd $700 ono Viper(brand new) alarm w/remote start $650 If interested just gimmie a bell

i found the nankang sports tyres to be a good tyre rating at maybe 8/10 price is very good also

bought it but never got round to having it installed. no longer needed and cost me $850

hi ppl i currently have a brand new viper alarm system with auto start feature that i wish to sell plz gimmie a bell if interested

I like the overgaurds but couldn find them myself so i just got the full fibreglass pumpped gaurds