BOOSTMEISTER

I would find it hard to believe that thekits come from the states as there aren't too many r32's over there that I am aware of.

I'd go for: Falken FK451 or Falken ST115 AZENIS I just got some ST115's to replace the 451's that didn't fit my rims. They are the best tyres I have had which have included F1's which I thought were the best. The ones on top are the 451's in 265/35/18

Roy, sounds like you may have a FCD as fuel cut on the R32's is around 1bar and even on most aftermarket (BLITZ / Mines etc) its around 1.3bar so unless you felt your car surge badly while at the boost you may have a trick lil black box hidden behind you dash somewhere:D

[ABU53] Mate, your car looks strikingly similar to another I recently saw only with smaller wheels:D

I just picked up 2 20L drums of Toluene from BP ($48 each) and will mix it 40/60 which basically means that on an empty tank use all 20L then fill it up with Ultimate....Just enough to tune with then get to the drags and run:D

I am....see you there:D (Racing too)

No, you can't get the top off without messing it up real bad....

No they are dodgy:D Remove it and send to me immediately:lol: Nah mate TOMEI (www.tomei-p.co.jp) are a big tuner in Japan.

Thanks I appreciate that, will ask him when he calls....So can I run straight toluene? If so what ron rating would it be....You never learn unless you ask questions

Rev210 I am waiting for a call back from the main BP distributor depot here in town, what should I be asking him to sell me? Would they have a premixed fuel with a high RON or do I need to ask him for a can of Toluene then mix it myself??? Please help I expect his call soon.

A lot of people do but not just as easy...most guys will buy stuff like ELF Racing fuel (103RON) which anyone can buy but the C16 / C21 you need a ANDRA license now to get the stuff. I suppose most don't like the idea of brewing stuff yourself incase you blow your motor to bits:)

The monkey in the second pics is the URAS monkey and is used by them extensively and is embossed on the bonnet of that s14 in the first link

From what I understand the PO Cat was originally drawn on cars by drifters after an accident....most likely, Uras actually took the PO Cat and stylised it as there logo due to the amount of drift cars they build. The question is simple, do you want the PO Cat like I posted? If so just tell me how high you want him and on what vinyl and I will make it. private email me to discuss payment etc.

I am very interested in this as I was going to buy some C16 for Jamboree this year to help me into the 12's. I assume that C16 is 116Ron, is this correct? So is it possible to change the mix i.e. 40% Toluene and 60% BP Ultimate to make a higher ron fuel...I would like something up around the 110ron mark. Who is the best person to get to test the ron rating....

Please someone correct me if I am wrong but the URAS Monkey is actually different to the "Punched Out Cat" The PO Cat I do sells for $15 and looks a bit like the one below.

Doc: Wanna race? Wait till I post a pic from a night shoot! adam32: Yes I do, I just cut those shapes out of the support bar. Roy: Thanks.... They are 18 x 8.5" I think and are DTM's...not sure of the model, ask prank he has the same rims ( ) he may know the model. Birty: Actually I can't fit my big head in BECAUSE of the sunroof...When I go to the drags I have to almost lie down to drive cause my dodgy helmet is huge. Is there anyone short here that would like to drive it at Jamboree??:lol: ?? Oh and about the 12sec slip....You never know what will happen at Jamboree but with my best of 13.7 with rock hard suspension and bald tyres I feel a high 12 is possible even before my secret mods for Jambo.......

All depends on the vinyl and how you remove them. You should never use chrome or brushed alloy-look vinyl if you want to save your paint due to the amount of heat transfer....normal plastic vinyl is fine so long as you wash the car regualy. When removing them leave the car out in the sun for a while so the vinyl softens up a bit then remove. I have never had a problem....also depends on the condition of the paint.

Thanks....its sometimes hard to make something that already looks great look even better.

This is what it is on:D The guards have been rolled (Japan) and thats it...not sure of the offset though. Have some TEIN suspension and it is dumped on that with about 10mm to go on the suspension (height adjustable).

Didn't realise they were quite that bad....still gripped really well even in the wet:D I decided to go for the Falken FK451's in 265/35/18 as they have awesome grip without going too soft.

There the ones, I think so long as you don't go over the top with stickers all over the car then it looks good especially if they are all teh same colour and a colour that is a lighter/darker version of the body wo it contrasts nicely.

Can have them done and posted out whithin a few days if you want...

Chucky I can do the sticker for you at a good price in whatever vinyl you want just let me know the brands.... $8 each for normal size ones HKS APEXi BLITZ TEIN BOMEX PUNCHED OUT CAT (DRIFT CAT) CUSCO FALKEN OS Giken C's EBC Green stuff GReddy GAB Central Circuit "Street Racer" in Japanese

You want some TEIN suspension fo $600:D

Hey I look just like him:lol: Great, just the one person in the world that I wanted to look like.