Lukas 33

Hey mate do you have any receipts or anything to prove how old the injectors are or any flow tests? Im interested. PM me

They do RB30 blocks too 11k is a little steep though.

HAHA $38k for 246rwkw? I have spent maybe 20 and I am hoping for ATLEAST 320rwkw from the 25/30. Wanna make up a price list of where the money went to? $160 a week for 3.5 years on booze, polishing cloths and wax so you can polished your wheels doesnt count.

If the turbo itself is good and its only an actuator thing then it is pretty cheap. Do a search for putting 25 turbo onto a 20

No offense or anything man but $700 is a steep ask for a motor which is mostly in pieces and needs a rebuild. You can get a running rb30 with all manifolds, injectors etc for $500 from the local wreckers.

I dont even know where to start

Holy fark! That is insanely cheap!

Yeh true. I dont know how it says 607 awhp BUT has a dynojet printout? Wont that be djhp. Which is about 20% higher than whp. Soooo maybe its more like 500awhp.

I am just amazed that the Denso 660cc Injectors are able to make the 607awhp @ 27psi. Also shocked the 3.5" exhaust isnt too restrictive for that power level either.

Absolute waste of time getting a FPR for those mods. I dont know whether I would say "better" than an adjustable one. But it will do the job fine. You wont be maxing out your injectors on 11psi with those mods. And just for your benefit "You are wasting your time with an adjustable FPR" Save that $200 or whatever it is and put it towards saving for an ecu

What he said! Search search search. Trust me why I say there are DAYS and DAYS of reading to be done Enjoy!

Ok so now Im half convinced to move there and half convinced to move to NZ for similar reasons. Big question is......how is the mining sector in NZ and Tas And to all those other sad die hard SAU fans reading this shit on xmas day. A merry xmas to all And seriously get some friends and get off sau haha

On the tuning side of things $750 is about right a tune. I reckon its actually a good price. Ive been quoted MUCH more than that for a tune. HOWEVER if I paid that much for a tune I would expect it to be spot on. And honestly its not about a cup of tea and some scone with customer service. But listening to what the person wants wouldnt go astray. The last mechanics I had my car at did not do a single thing I wanted. [Rant] I asked them to wire in a 60amp relay for both my fuel pumps and to adjust the fuel pressure........they wired in a walbro 255 internal pump........WHY.....we thought you needed it (coz the 040 was too shit apparently). They did not rewire it properly so it was not getting the full voltage. They just dropped it in and connected it up to stock wiring......apparently according to them that is what I asked for. Every single thing I asked for did not get done properly. They suspected my water pump to be leaking slightly so they said they would pull it off to check the gasket (?). So I told them over the phone if they are going to pull it off I will throw on a new water pump while its easy to get at. When I got to the mechanics later that day they said "oh you have a new waterpump? We just used from gasket goo to stop the leak and put it back on". Thanks for all that wasted money in labour wankers. Everytime I rang them up to see how the car was going or to get the total cost so far I always got "I will call you later this afternoon before I finish work to let you know". That happened every day for the last week it was with them. After the weekend passed I got a text message on monday morning being told "Your car is now finished and is ready to be picked up". Note: Still hadnt relocated the power steering resevoir, wired in the relay for fuel system, tuned the car or done pretty much anything that I asked for After a lovely drive to mechanics to pay my $1500 bill to drive home my dirty 11 volt walbro dusty and bird shit ridden skyline I opened the drivers door and found that all their dirty seats covers were still laying around all in the car and the ECU was not tucked back behind the kicked panel put was just laying all pulled out on the passenger floor. Anyway enough of my rant. My point is I know modified car scene is a straight cut to the point business and I like that. HOWEVER some common courtesy is at LEAST expected. You dont have to chat about the weather or a cup of coffee but at least talk to someone for f**k sake [/Rant] Cheers Lukas

Yeh I agree with you there. Sucks but I guess that is what they need to do to stay ahead of the game. Not like they can patent it haha

My car was making some bullshit noise like that about 4 weeks ago. I just replaced the idler, tensioner, timing belt and water pump and viola all gone. BUT Im not saying that's the issue.

Yeh but for the price tag of a NA supra.....I would definately rather something else

I wonder.......does rob (R.I.P.S) remove his pads in his high hp cars?

Yep Nice rebuild time Or just drive it around as is till its completely rooted. And still.....rebuild time. Either way, knock yaself out.

Trust me it was just as painful to write it

ha lool sall gud. U shud juz suk da aiir frum da frunt baa coz dats wair it niic n cld.....f**k Just have the air flowing up from the front bar and into the airbox in the engine bay.

HAHAHAHA!!! love it. Pullling the head off is the best option but it depends if he knows how to do it etc and can be bothered.

Do you know how the turbo and everything works? im not trying to be a smart ass. Im just curious as to how much you know.

Well an AE86 isnt even in the same class to me haha I thought you mean something like a shitty FWD rolla or something. ok then yes i agree. Get the AE86

Just use any old torrent site. I downloaded SOOOOOOOO many old n64 games a while back and just used my wireless 360 controller to play them. So much fun

yeh the adrenalin just kicks in and you just cant concentrate. All I can usually think is "f**k yeh!!"