NewKleer

if you have microsd cards uve verified to work, if u could post the brand/capacity and speed. keeping a list in this thread on pga, just compiling a list of working cards (though id assume most cards work unless told otherwise)

thanks...i had contacted the for sale moderators (buster had full pm box, neil and blitz never replied) without result so was wondering if id missed some sticky that says "dont pm mods, you should instead submit requests 'here'" or something to that effect. all good, thanks

is it unreasonable of me to expect mods might read/reply to pms? who are we supposed to contact about things that shouldnt be posted publicly?

v2.01 firmware is now available on firmware page. has sequential and random speed tests for microsd cards (and capacity/info as per 2.01 beta), no actual logging yet, but you can test out microsd cards you may wish to use for logging. note, as the lcd will tell you, you'll lose any existing data on the card if you do the speed test. if ur going to use a card, buy one just for this, because it wont be windows/pc readable, and to read data off it you wont remove it, but use the usb cable and some program ive yet to write to download the logs. there is a howto guide for those of you (displays sent out before september 3 - i.e. id 1-64 on the list) who need to do the resistor mod here. those people ive contacted via email a couple weeks ago

yeah what com port is the usb/serial adaptor? check out ports section in device manager also patrols are generally crap with consult. try nistune with trial/trial as user/email and see if that works. its supposedly one of few software that work with the unco consult protocol the patrols use

im not aware of any reason why it wouldnt...do you think you should have averaged higher? (i havent driven far enough to get past more than about 100 or so average due to slower local roads etc). fyi the reset on options menu can be used to do the same as unplugging/replugging in display (it doesnt reset saved data/settings). so perhaps if you have someone that can reset the display once you're above 110km/h and see that it is averaging correctly. also a good writeup on microsd resistor mod (that ive emailed everyone about) for those who are at id less than 65 on the list: http://forum.pulsar.org.au/showthread.php?t=79971

ive got a possible one for you, sent a pm during the week

and/or have mods act on the reported posts (as was suggested as a way we can get the mod to edit our post, by reporting it with what we need done...but hasnt been happening)

for $300 theres the subdatascan s2 (google), although its only got data display/peak values (and rs232 passthru) so naturally not as awesome as mine, but being newer tech the subarus have some nifty data available like boost, intake temp, ignition retard (level of knock?). and of course you guys with OBDII have all the OBDII stuff like scangauge so you're all set! i have my eyes on getting maybe a 03+ wrx in a few years, doubt ill be making anything non-nissan until then.

ok so ive been working on microsd logging this weekend (theres stuff i should do first, but oh well!) and theres good and bad news. good news is ive got extremely simple reading and writing going (as in write 80 numbers and read them back), so its possible. bad news is that i could only get it to work by adding a resistor to fix a too high voltage going to the card. see attachment. if you cant solder then you could probably even just mechanically attach the resistor (being careful to only attach to specified contacts) by winding legs around the existing component legs and then cutting short. and the writing wont write in fat file format so u wont be able to use your card outside of the display without reformating it. you'd download logs with the usb port and some form of downloading program i gather. for read/write speed, its about 30KB/s (512 bytes in 15ms), which should hopefully be enough (thats at 100% of the cpu's time, which wouldnt leave time for anything else. but we only need ~5KB/s so should be ok)

yes theres still about 25 left

sign up and add it to the bug/feature tracker on the site...but i dont think itd be high priority...its like yanks asking for GPM, who uses that?!

right on the money. and make sure the display is on one of the two main screens nearly all the time (eg if u go to main menu it stops recording fuel consumption etc until you go back to main screen). this will be made easier once i do the global trip meter statistics stuff so it saves stats from each session so u have total fuel used etc. until then you need to rely on a full trip with filling up both sides and dont shut the car off (or write down fuel used before you do) on the way

nothin yet for the microsd, dont expect anything too soon for it, a few more things will come first (hopefully saving trip meter onto a global trip stats screen or similar).

327.68 volts as far as consult data stream is concerned...but the AFM's limit itself - not sure...id have thought 5 or 5.2V ecutalk will clamp AFM at 9.9 if it somehow reported higher it may be the case that more air than whenever u hit max AFM volts is going in, but the afm keeps reading 5.1 so eventually the mixture may lean out. need to get on a dyno to confirm

well the injectors arent even 100% yet, and then once they are you still need to make a bit more power to get the rich AFR up to a leaner/more dangerous level...so i wouldnt be too worried about it, of course a dyno, and further datalogging would help if you are concerned. but AFM might be more of a worry given its closer to limit...do you then get fuel cut etc? i dont know what happens when u max out AFM. also are these peak values? if so then they didnt all happen at same time...because no way ur running 50deg BTDC at full boost!

skylines (r32 at least, not sure about r33/r34) are lucky they have that little dip on top of the center console, good mounting position! by now everyone who has expressed interest (up until and including 23/8, ie sat night) has been contacted for payment etc. contact me if you thought you had but i havent pm'ed you. anyone else after one will get payment details etc immediately until the rest of this batch is gone. have sent out around half of them so far (a bit under 50)

fyi a user just found that 0-160 and 400m time trials are mixed up (so to do 400m u need to choose 0-160) this will be fixed in 2.01 firmware probably within the week

just got one for this thread then, but have missed a few for pm's over last few days or so

did realise you were part of group buy, so ive refunded the difference between individual website price and that for the group buy (and updated your details on list to show youre from sau)

yes it will. there is a ticket open on the feature/bug tracker to add ability to save the trip statistics. it would probably be a third screen (so 2 trip ones, one showing current trip, and one showing all trips) that shows your total recorded trips. reason why it hasnt been done yet is that trip data would need to be saved to EEPROM, which only can be written to a limited number of times, and the display doesnt know when you will turn off the car. so need to do some tricky wear levelling to spread the writes to EEPROM out over the fully spare eeprom, and to only update the trip data every say 30s. but yeh i really want this feature myself too so will try to get it done when this first batch is sold and i have time to work on it.

yep you're down for blue screen. everyone on the list has been contacted now for payment (and i think ive notified everyone who's been removed from the list after i didnt get any response from them in previous pm's). over 30 have been sent already (took two big bags down to postbox today)

just noticed the timestamp on my emails from sau are 15hrs behidn (i.e. GMT-5, or some yank time) so im guessing the mail server's timezone isnt right?

[red cross here] Upload failed. Please ask the administrator to check the settings and permissions also current attachments dont seem to be showing up after the move either (just realised this thread was probably pre-move)

attachments probably died after forum move yesterday and userguide is up here