alwaysdreaming

hey guys, im chasing the bracket/bolt that allows you to adjust the power steering belt tension for an r32. everything else is all hooked up but just cant run a belt at the moment. pm me or txt me on 0433971544 thanks

hey guys and girls I have up for sale a fully ported and polished series 2 rb25det head! I had it being built and was getting ready to put it onto a rb30 bottom end, however i now need to free up alot of cash and can no longer afford to have this sitting around waiting for a bottom end. few details about it, original valves are being used, have all been tested and polished new heavy duty springs new guides has been decked and pressure tested. all the valve seats have been smoothed and checked. and almost 3 days worth of porting and polishing, the guys specifically rang me up and made me come down just so i could check it out before he put any valves or springs on it. I had it built by windford in victoria, they are well known for there N/a v8 drag motors aswell as some very very serious boat motors. it currently has no cams with it, standard cams can be ran with it or ur general tomei cams, i was going to be running custom built cams but cannot afford them now so none are included in sale. Im looking for around $2800ono located in vic, will post if buyer organizes and pays for shipping for any questions or more details please pm or txt me on 0433971544 regards Gerald

Open to all offers guys! Mayb a nice 180 with cash on top.

Hey Guys and Girls I have up for sale my 1989 r32 Gtst which I purchased about 8months ago. In that time I have thrown a lot of cash towards it, but unfortunately I have run into considerable money issues and am required to sell it. I am after $12,000ono obviously am happy to negotiate but nothing stupid, does not come with wheels pictured. When I brought the car it had a mildly modified rb20det in it, before I had the chance to register it the motor blew up L. After that I replaced the rb20det with a relatively fresh RB25det and gear box. The chassis has around 150xxxkm on it but the motor since rebuilt has approximately 15,000km. I have done less than 1000km on it. Currently running good compression along all six cylinders. All the work for the conversion was carried out by George and his team at Revzone in Ringwood. Have $5,000 in receipts just for the labour and minor parts not including motor and gearbox. (Previous owner of the RB25det and box had it rebuilt to standard by Dr. Drift 1.5 years ago) Current modifications are as follows Exterior GTR fibreglass front bar Vented fibre Glass bonnet (not colour matched) Or vented carbon fibre Bonnet for extra $500 Standard r32 rims in white rwc rubber Very dark Tint Interior GTR Cluster GTR centre gauges 330mm momo wheel. Autometer boost gauge. Sony head unit and all wiring ect to run sub and amp package Performance ISC front mount cooler ISC 52mm Alloy Radiator Full 3” turbo back exhaust with decat pipe and hks dragger rear (cat included) 14” thermo fan (controlled by wolf 3d) Wolf 3D V4 Atmospheric BOV Walbro 550hp in tank pump Lowerd springs R33 gtst Brake calipers The car is currently making 210rwkw at 11psi on a safe tune and is only restricted by the standard turbo and eventually standard injectors. The Engine oil was completely flushed and replaced with motul oil less than 1000km ago The Gear box was also flushed and renewed less than 1000km ago The water pump was replaced less than 1000km ago as a precaution before dropping the engine in. Car currently does not run Aircon, removed condenser and also I am not running power steering however the pump is there, just no belt. I love the car but cant afford to go any further with it nor can I afford to keep it any longer. It is rough around the edges but not far from being a monster. Car is located in south east Melbourne I will post pictures as soon as I get a chance, if you have any further questions or would like pictures please don’t hesitate to txt me on 0433971544 or pm me here. Regards Gerald

Bump

Man these look sexy as f*k! Is that Ur s14? Free bump for wicked concave! And my names Gerald so free bump again lol.

Mint wheels, done some work on this car and they look amazing in person! Good luck with the sale mate, what wheels u looking at?

hey guys, i have a new fibre glass bonnet that i purchased for my 32 last year and never ended up fitting it, never been painted. i bought one for my r33 aswell and that fitted up very well so i am assuming this will too. I am looking for around $450ono located in rowville victoria, i will post if you do all the organizing of freight. this is a link to the site i purchased it from and pictures of the bonnet. http://www.carmate.com/product_details.php?productid=NSGTS91T2BON regards Gerald

Well it runs fine till the engine at operating temp then runs like a dog under any type of acceleration and idols rough. Checked plugs, they were a bit fouled up so I cleaned up then drove it and it did it again.

Hey guys, I think my coils are stuffed, so chasing a complete working set of standard coils that I can chuck in to make sure they are my problem. Prefer Melbourne or express post as i can onlY drive my car till it reaches operating temp. Text me on 0433971544 if u have a set. Thanks Regards Gerald

Where abouts you from mate, sorry if uv already stated and I missed it.

hey guys, need to replace the cams in my rb25det series one i am currently looking for standard or tomei (drop in) cams depending on price. i need them with in about a weekso please call/txt me on 0433971544. Regards Gerald

vivagarage do a fairly nice looking front and rear gaurds. iv put them on mine, they are 25mm wider than standard.

haha south east, richmond/rowville . wherd u get ur r33 roof spoiler btw man love it lol

awsome thanks mate, cant wait to get some bloody fans running. my 32 is still at revzone lol. hopefully get it back soon to play with it a bit more

great price already, i got a few of these gauges from autobarn a couple of weeks ago for like 150 or some shit

got one guys, cheers

im just planning on running a switch on mine, not going to have sensors hooked up or anything. its in a pure track car, will this b alot easier to wire up being that it shouldnt requir a sender ect?

still hunting guys, surely someone has one

hey guys need a 3" r33 rb25det front and dump pipe for a standard turbo. looking for standard type not split pulse need one in vic for pick up sunday/monday please contact me via 0433971544 or pm me cheers

Hey guys and girls i need to get rid of my daily so i can get some money together to finsih my new daily lol. its a 1987 series 3 r31 skyline with 11months vic rego 240,xxxkm *manual (reverse is stuffed, comes with full rb20det gearbox as spare) *pale blue in coulor paints nothing speacial, clear coming off in parts, scratches ect. *gas conversion, cheap as chips to run *full 2 1/4" exhaust with extractors *cd player with sony explode speakers and all wiring for a sub and amp set up. *dark tint *runs well, drives fine, have been using it as my daily for over a year now. *imobolizer system installed, central locking. *lowerd on pedders springs and shocks bad points *has a big dint in the rear passenger door *petrol system needs to be looked at, pump ect works but no fuel pressure at present. *as stated before has lost the use of reverse but i am supplying a full rb20det gearbox in good condition with tailshaft. am looking for $1700ono throw me wat ever offers you want, i just want to get my r32 running. i only had the one picture, will add more later or txt me for them i am in south east melbourne, contact me via pm or txt on 0433971544

got one now, thanks

hey guys im chasing a r33 rb25det clutch master cylinder in good condition, did a engine/gearbox conversion and the the clutch master was f*ked. any help is appreciated send me a txt on 0433971544 or pm me. cheers

i work at a tyre store and am happy to reccomend outrageous size and am happy to fit them aswell just doesnt come with reciept for fitment

R33 Gts-t series 1 ssr sp1 prffesors Fronts: 17x10 +11, running spacers to clear brakes require 25mm gaurds with -2.5 camber due to spacers running 235/45/17 toyo proxxy r1r's Rear: 18x11 -9 require 25mm gaurds with -2.5 camber running 245/45/18 bridgestone re050A II