pintaline

out of interest, what's wrong with the isc coils? any bad points or just not the best around for the price? D.

yeh i was thinking the same..... D.

yes thankyou it does, now i just need someone with the lights controlled from the stalk that doesn't have the extra switch to do the same..... i now know for sure that the plug is for the lights and it requires another add-on loom thing, now i just need to see how the system works without the extra switch. interesting find tho..... thats the bit of plastic that is under the steering collumn and the square bit looks to be a mounting spot for the extra switch... planned for from the factory..... D.

anyone with these lights fitted out there?? just need you to have a quick look under your dash for me..... D.

that looks like bad camber and/or toe to me, tyre just wore badly in that spot. different issue to pics above D.

i'm good at my job D.

yeh that's what i'm trying to achieve but i have the second position on the fog switch that is supposed to control them so first position is just foggies on and second position is both on. that's what i'm after... if all else fails ill just find the control wire from the stalk that used to control the rear fog light and re-direct it the the spotties but i'd like to see if i can do it all as per factory before just bypassing things. i really need a wiring diagram..... do they exist? D.

my bad, should have quoted post above yours brand doesn't really make a difference with this kind of thing anyway, i've seen it with just about every brand D.

they're not falkens D.

slightly, that seems to show the setup as to be installed by the dealer with the extra switch some people have... i'm trying to avoid using the extra switch as i know some are controlled by the light/indicator stalk. problem is, the wires from the stalk just disappear into the main ignition loom and i dont know where they come out D.

ok i'm digging this up coz i got bored today and did a bunch of stuff on the car and it got me looking at it again... i've traced the wires in the engine bay to an empty plug under the dash where the looms meet behind the fuse box (shown in the pic) but i cant see a plug anywhere to put in it! can someone with dayz spotlights please have a look under their dash for me and see if there's anything in this socket, where it goes, where it joins into the loom and what colour the wires are??? also, in the second pic, the plug circled in yellow, can someone that doesn't have a rear fog light (red bit where the second reversing light should be in the taillights) check to see if there's anything plugged in there?? another request, can someone with fast have a look for the dayz lights and see if it shows any of the loom ad-ons/extra wires/switches associated with them? the plugs were in the factory loom in the engine bay for the ad-on loom with the relays in it to control the lights and i have the extra spot on my light stalk to control the rear fog light i used to have. the car i got the lights from (rubyRS4), had both a rear fog light and the spotlights and they were both controlled from the same position on the switch... if someone has a wiring diagram or pinout for an S2 stag, i need a copy to figure this out! D.

are the bonnet bumpstops any good? D.

how are the bumpstops for the bonnet? i need 2... D.

looks like there's a screw in the tyre in the first pic so i'd say low pressure+the mad camber wear! which i say would be from towing heavy car trailers... that's the kind of thing that would make it split like that as opposed to just bursting. btw, they look like a maxxis MA-V1 or an early pattern sumitomo HTR, for those of you playing at home D.

would you sell the sump without the diff in it? i need a sump to test something. diff gears aren't too hard to pull out... D.

would you take $1000 for pfc? D.

had the motor had it's 100 000k service done? eg new water pump, timing belt etc. if so i might be interested in it but i wont need the ecu or loom D.

all you gota do is buy a set of led parkers from 666DAN in the for sale section, remove the old bulbs and put the led ones in. simple job, took me less than 5 mins D.

i have all 4 doors in white but i'm in canberra.... but if you're happy to pay the shipping, im happy to send them.... my postcode is 2615 if you wanted to get a quote D.

ill take the towbar... pm me details and ill have it picked up before the weekend D.

ill take them. pm me details D.

i might be interested in that...... where abouts are you mate? D.

thickness? D.

door looms aren't hard wired, they have a big-ass multi pin plug that's secured with a 10mm bolt, accessed from the outside of the door pilllar behind the rubber boot. iirc D.

ok, got some sizes here. for 19'' tyres with 35 series profile- all will fit an 8.5" rim legally 215 - 633mm 225 - 641 235 - 647 245 - 655 255 - 661 265 - 669 275 - 675 30 series- all will fit a 9.5" rim legally 255 - 637 265 - 643 275 - 649 285 - 655 so, closest matches are 225/35/19 and 265/30/19 only 2 mm difference between and, 235/35/19 and 275/30/19 only 2 mm diffenence BUT 235/35 and 275/30 are nominal sized tyres for 8.5 and 9.5" rims the other sizes will fit legally and safely but the nominal (reccomended) sizes are 235/35 and 275/30 hope this helps people out D.