SXY_33

another quick question... i hav a safc2 which i used to tune the ratios for the stock turbo at 12psi. now that i hav the hi-flow and 14psi, should i get it retuned, do my ratios need changing??? or should it still be fine?? thanks again guys

so ur saying that i plug the hose going from the inlet pipe (the one the pod filter is on) straight into the actuator???? and wat just block the one from the intercooler pipe or do i still use the t-piece and connect it to the intercooler pipe, just avoid the standard solenoid???

yeah i removed the bleed valve... here is a pic i also tried changing the "yellow" and "blue" hoses, but nothing seemed to changed is it correct atm????? what else should i check, which is the vacuum hose???

opk so i pulled out the bleed valve and put on the stock t-piece, but it hasnt changed anything, still boosts like crazy, it starts peaking at 3500 - 4000rpm, and nothing has change from my stock setup, just the hi-flowed turbo... and sure its boosting, but no power is comin from that boost!!!! any easy way of checking if the wastegate is actually opening??? could it be my safc 2, maybe the mixtures need to b changed to suit 14psi??? would an ebc fix this problem????

no worries mate will do, ill let u know how i go

thanks for the quick reply alex ill try that as soon as i get home from work

Hey guys i just finished putting in my hypergear hi-flowed turbo and took it for a spin, but its boosting like crazy, my boost gauge showed that it was hitting round 20psi??? ive got a 14psi actuator and my bleed valve is still set on 12psi from the stock turbo. and even tho its boosting doesnt seem to hav that much power???? any help is help my mods: fmic safc 2 (tuned to 12psi, which is wat i was running on the stock turbo) turbo back exhaust, no cat pod filter 040 pump

also is the r33 gtr turbo a direct bolt on... would that be an "upgrade"...

Hey guys, i was drivin home last nite. as i was turning a corner i heard a strange noise. sounded a lot like miss-fire, i could feel a vibration coming from the engine bay. I figured my coilpacks had finally gone. I was only a few mins from home and had to go to work so i figured ill drive it slowly home. the noise would go and come back, the car had no power at all. then as i turned into my street the noise when and then all of a sudden there was a loud winding noise, the higher the revs the louder it is. sounds like turbo wheel is scrapping against something. and its def comin from the turbo side... and im only getting vac no boost!! anyone had this happen...??? good thing i was looking into getting a high-flowed turbo anyways lol i've got the basic mods: fmic turbo back stainless 3' with no cat pod filter safc was making 190rwkws at 12psi and thats all i really wanted for street use. can u guys help me choose a new turbo, since im upgrading it would b nice to have round 220rwkws on a safe tune, i was looking at the GT3076 or getting mine highflowed by Hypergear - around $800 and comes with 12mnths warranty i dont want anything big and laggy and so i have to spend another 3k changing injectors, ecu...etc im happy to spend around 1k. any advise would help. Thanks guys Adam

def off a series 1

so which one would u recommend for my goals... wat benefit does the knock sensor give me... sorry if im asking stupid questions

Hey just wondering if any1 can tell me what the difference in the 3 units is. ive got a stock ecu n just wanna get one of the units b4 i take it on the dyno. ive got an air filter, turbo back 3" exhaust (no cat), fmic and a 040 bosch pump. hoping to be able to get around 200rwk's with the help of a safc and bout 12psi. thanks

thanks guys... atleast this way it wont be visible lol

Hey guys just a quick question on relocating my BOV. Ok well atm i hav the stock BOV on, and i have a stealth style front mount. So my question is can i place my new HKS SSQV on the intercooler pipe that goes behind the cooler, (so no1 can see it) and simply block off the stock one by placing a metal plate under it. so when i pop the bonnet it still looks like i dont hav an after market BOV. appreciate any comments/recommendations, will the HKS still be as loud as if it was placed where the stock one is? thanks guys

exhaust sold

sorry dont hav either...

here are the pics of the exhaust, its a Fujisubo Giken 3" cat back exhaust

Hey... this might be a stupid question, but would a T28 bolt straight on the r33 stock manifold and would it be a upgrade from the stock r33 series 2 turbo? i hear that the T28 can handle more boost.

hey cant really say much... it was given to me but i never got around to installing it... here are the pics you can see the model number on there

basically the rad support...

bump

Item: Air Box with filter Condition: Excellent Price: $70 To Fit: (What car) R33 Item: Stock R33 intercooler Condition: Excellent Price: $70 To Fit: (What car) Any Item: HKS turbotimer with connection Condition: excellent Price: $60 To Fit: (What car) Any Item: 3 inch Jasma exhaust, catback Condition: Excellent Price: $200 To Fit: (What car) R33 Item: TV tuner + antennas Condition: excellent Price: $60 To Fit: (What car) any Item: Pioneer 6 CD stacker Condition: Excellent Price: $60 To Fit: (What car) any Item: R33 nose cut Condition: excellent Price: make me an offer i cant refuse To Fit: (What car) R33 Location: Adelaide Contact: 0413536936 Comments: willing to post at buyers expense. open to all offers. Pm if u need pics

Front and dump pipes sold Also have stock intercooler for sale $70

Item: stock front pipe Age: 12yrs Condition: good Price: $30 make me an offer To Fit: (What car) R33 Item: Dump pipe Age: 12yrs Condition: good Price: $30 make me an offer To Fit: (What car) R33 Item: 3 inch cat back Jasma exhaust Age: donno Condition: good Price: $250 make me an offer To Fit: (What car) R33 Item: Series 2 rear spoiler Age: 12yrs Condition: excellent Price: $150 To Fit: (What car) R33 Comments: Silver Location: Adelaide Contact: Pm or msg me on 0413 536 936 Comments: Both pick up and post available at buyers cost... for pics pm me

hey how long is the straight piece... and is it 2.5 inch?