DoughBoy

Also have 4 Wiggins clamp assemblies in 2.5 inch. $200 per assembly. Turbo outlet on this setup is 2.5 inch.

Selling a turbo kit to suit RB26. Consists of Trust exhaust manifold Innovative 80mm turbo, polished comp cover, .96 turbine housing has been coated. Greddy twin inlet pipe (80mm - for Z32 AFMs) or an aluminium intake funnel. Manifold has done about 3,000k's street driving, turbo was used for 5 minutes on idle to check for leaks. Asking $3,000 Turbo is capable of ~650rwkw, compressor wheel is similar to GT47-80 but in a more compact housing (T4 based opposed to T6). Will make more power than a T88H-38GK or T51R SPL. Located in Sydney.

... or Ballarat?

Sounds like a plan, post up when you are free.

I don't think you will get accurate or realistic figures, mainly due to the fact that very few skylines are raced consistently and are optimised for their setup. I know of a 370rwkw GTR that did a 10.7, then came out again with over 500rwkw and did a 10.5. Car also lost ~50kg's along with the power increase. Another one is 2rismo - I think his old setup with ~280rwkw's did an 11.6, but there was another R33 with over 330rwkw's that did no better than an 11.8. Too many variables, and not enough cars out there. Also getting unbiased information from people is a bit of a bitch.

Hi, I'm after a series 2 R33 GTS-t front bar. Would like complete with indicators and lip but will look at anything. Pref located in Syd. ---- Edit: Have found all the parts needed, thanks guys.

Deposit taken on both items, will post up if they don't come through with the rest of the money.

Sorry should mention the Brembos are both front and rear sets, front are slotted rotors rears are stock. 85% of material on pads and discs, have never been machined and only used on the street. Was on a drag car but cannot fit the original 16inch rims over them, so went back to stock R32 brakes.

Bu5ter had one for sale, should be in the forsale section somewhere.

Selling a complete R33 GTR Brembo brake setup. Consists of calipers, pads and rotors - $2000 R32/33 GTR PowerFC with 2x 80mm AFMs (RB25). Maxes out at ~450rwkw - $1300 Located in Sydney.

Hey is there an unfinished project/encouragement award? Unfortunatley I know of more Skylines not running atm than ones on the road.

Holy shit. That's some serious gear in there. So apart from the engine bay frame rails, outer skin on roof, quarters and front apron it's all tube?

Capacity is king, go for the biggest motor you can.

Aww come on man, I thought you were the good guy! It was your girlfriend that was the evil one!

http://www.skylinesaustralia.com/forums/in...p;#entry2867785

Hi guys, Just seeing if anyone needs a tow from Melb to Syd this weekend. Have a spare spot on a trailer heading north, will be in the good hands of Troy, myself and a bottle of Jagemeister

Have got one here, in Sydney. Can get it pulled down at trans shop to inspect internals if you want?

Hi, have got the complete front sump/diff assembly - although I think the ratio is 48/11?

Too damn soon to get mah gear together by then... and someone needs to come down to embody the arrogance/rudeness of Sydneysiders with the wankerism of drag racing.

If you were running an 11.9 I'd say it would be easier dropping boost back a notch or two so you can run in the 12.00 range. Cars running flat out don't seem to be consistant at all, notice how some people qualify a second faster than their dial in? Other than sandbagging it to run DYO or a x.00 time, only other thing to do is man up and go alot faster... so you can sandbag that bit harder!

Hey Adam, you should know by now the drag arena is for dcik swinging, gun toting w@nkers. Where political correctness or manners are forgotten in the pursuit of the almighty ego. p.s. Hope to be back in the drag ranks soon!

Woah, great work Scotsman that's a pretty impressive effort.

That was an awesome event. You guys are pretty lucky to have the whole deal, from excellent organisers and officials to a good group of enthusiastic participants. Big thanks to Troy(Roy) for the invite down, also for showing me the might of the RB20. Had a great weekend, nice to meet alot of NSW and VIC crew as well. Thank god I missed out on being initiated with the fcuked up eye watering sauce of death at Taco's, although I wasn't worthy of wearing a big hat I hope I kept up with the rest of the night. Heh thanks to the late night crew as well, was good fun!

Ouched

What brand convertor is in at the moment? What do you mean by "billet convertor"? Is it just the stator or some part or the whole thing made from billet?